User Guide

PTZ
Control
You are able to save and recall presets from the
Web Dashboard using the Select Preset option. To
operate this, simply press the Preset number you
wish to recall or save followed by APPLY PRESET or
SAVE PRESET
Settings
The P100 communicates with the camera head via
a serial interface, these settings should remain as
per default:
VISCA ADDRESS: 1
VISCA BAUDRATE: 9600
PT Max Speed
When controlling the P100 over NDI you can limit
the maximum speed of PTZ movements by
affecting this option, the higher the number (18)
the faster and more sensitive the movements will
be on the P100.
OSD
In the initial release of P100 the OSD is very
important for adjusting the camera image settings
since this is the primary control mechanism. To
adjust all cameras settings please press the OSD
ON/OFF button to illuminate the OSD.
The OSD is visible on both the NDI output and
SDI/HDMI and can equally be accessed via the
included remote control.
Please take note that the PTZ will not operate
normally (control of movement) until the OSD
menu is closed again.
11
DASHBOARD NETWORK PTZ SYSTEM A/V LOGOUT
EYES P100