Instructions / Assembly

Net Rings: Net rings are used to attach the netting to the cable. Using the ring tool, secure
one loop per square of netting.
Attaching the Netting: Begin working from one side making your way to the other side --
DO NOT attempt to meet in the middle while attaching netting. Begin in one corner and
attached the netting using the net rings horizontally. Once you’ve got a few feet in place, go
back to the corner and begin attaching a few feet vertically so you have a strong corner in
place. Continue to attach the netting horizontally then continue fastening vertically at the
beginning corner. Once the top and side are finished, you can finish the remaining sides as
desired. After you’ve attached the netting, inspect the cable to check for bowing or large
gaps. If any inconsistencies exist, carefully tighten your turnbuckles to close any gaps.
This is a general overview of Bird-X Bird Net Installation. Complicated projects could
require additional materials and instruction. If you need more information on how to
complete your project, please call your Bird-X representative for additional assistance.
Bird-X, Inc. ♦ 300 N. Oakley Blvd. ♦ Chicago, IL 60612 ♦ 312.226.2473 ♦ [e-mail]