User guide

Fault Location Mode
71
Figure 34 Activate Marker and Set Style
Step Action
1 Press the Marker key to enter marker
setup
2 Press the Mark softkey to select a marker
(1-6)
3 Press the Active / Off key to turn ON the
selected marker (active) or turn OFF the
selected marker (off)
4 Press the Type softkey to select triangle
marker (mark 4 in the figure) or line
marker (mark 1 in the figure)
Repeat Step 2 through Step 4 to select and
activate up to six markers and set the
mark style
5 Press the Esc key to return to the test
screen