User guide

Introduction
13
Site Analyzer Display Screen
See the following two figures and the accompanying table for a
description of the display screen components for Measure Match mode
and for Fault Location mode.
Display Description
1. Trace Graphic display of the measurement.
2. Marker Value Indicates the position and value of a trace
point.
3. Marker Cursor Identifies the trace point displayed in the
marker value.
4. Calibration Indicator Indicates the calibration status.
5. Battery Gauge Indicates whether the Site Analyzer is
using the internal battery or an external
power supply, and indicates the amount
of battery life remaining.
6. Recalled Trace Name Indicates the name of a recalled trace.
7. Mode Indicator Name of the current mode.
8. Measurement Data Points Indicates the number of datapoints
collected for each trace. 238 = standard, 475
= twice as many data points as 238, 949 =
four times as many data points as 238.
9. Progress Bar Indicates data collection progress
10. Softkey Description Describes the function of the softkey to
the left of the description.
Measure Match Sample Display
Fault Location Sample Display