User guide

Bird Technologies
6
Connectors
Power Supply
Internal Battery
The Bird Site Analyzer has an internal, rechargeable, lithium-ion bat-
tery pack. This will operate the unit for a minimum of 3 hours of con-
tinuous usage. Recharging time, from a full discharge, is
approximately 4 hours.
 Note: When the unit is received the battery may not be
fully charged. An ac adapter should be used when operating
the unit for the first time.
CAUTION
+22 dBm max. input
Do not apply RF power to Antenna Test Port. Exceeding the
maximum input will damage the Site Analyzer.
Antenna Test Port Female N connector for connecting to the antenna.
Use a phase-stable cable for best results.
Parallel Printer Port 25-pin (DB25) parallel connector for connecting to
HP-type inkjet printers. Pinter cable not included.
Computer/Power
Sensor Port
9-pin RS-232 (DB9) serial connector for connecting
to a PC or to Bird power sensors.
DC Input Input for external power supplies. Plug either the
ac power supply or the cigarette lighter adapter
into the dc input. The external supplies operate the
unit and charge the internal battery.