User guide

Introduction

Antenna Test

• Rejects on-channel interfering signals to +13 dBm.

• Three user-selectable trace capture options: 238 data points

per sweep, 475 data points per sweep, 949 data points per

sweep.

• Three graphic display formats: envelope, maximum, mini-

mum.

• Sweep measurement progress bar: indicates status of mea-

surement being taken.

• Stores up to 15 setups.

• Adjustable pass/fail limit with visual indicator.

• Stores up to 500 sets of measurement data (traces) at the

default setting of 238 data points to facilitate conversion

between Measure Match (Sweep) and Fault Location (DTF).

• Measurement data can be transferred to the Anritsu Site Mas-

ter Software Tools.

• On-screen comparison between current measurement trace

and stored data traces – no PC required.

• Pop-up menus contain over 70 cable types and up to 80 fre-

quency band presets depending upon the instrument model

number.

• X and Y scales and units are user adjustable.

• Six markers for either direct or difference measurements. Can

also measure relative to limit line or recalled trace.

• Measurement hold to temporarily store a trace.

• Printing capability. The Site Analyzer is compatible with all

printers that use HP PCL Level 3, including most HP printers.

Measure Match Mode

• Fast swept measurement.

• Frequency can be set using either Start/Stop or Center/Span

frequencies.

• Measurement units can be Return Loss [dB], Cable Loss [dB],

or VSWR [ratio].