User guide

70
Application Object – Class Code: 101 (65
HEX
)
Table 5-43 Application Object Class Attributes (Instance 0)
Table 5-44 Application Object Instance Attributes
Note: Above value range shows concept of Data Type. They do not describe the actual dynamic range of
the BDS.
Table 5-45 Application Object Common Services
Attrib Rule NV Name Data Type Description Value
1 Get NV Revision UINT Revision level of this object. 1
2 Get NV Max Instance UINT Maximum number of
available instances.
1
6 Get NV Max Class
Attribute ID
UINT Highest possible class-level
attribute ID value.
7
7 Get NV Max Instance
Attribute ID
UINT Highest possible instance-
level attribute ID value.
*
Attrib Rule NV Name Data Type Description
Semantics
of Value
1Get/
Set
NV Frequency UINT Search frequency. See below.
2 Get NV V rms UINT RMS voltage. See below.
3 Get NV I rms UINT RMS current. See below.
4 Get NV Phase INT Phase in degrees. See below.
5 Get NV Del. Power INT Delivered power in Watts. See below.
6 Get NV R UINT Resistance (Real part of
impedance).
See below.
7 Get NV X INT Reactance (Imaginary
part of impedance).
See below.
Attribute Name Quantity Description
1 Frequency 0.00 to 655.35 [MHz] (resolution, 0.01MHz)
2 V rms 0 to 65535 [V] (resolution, 1V)
3 I rms 0.0 to 6553.5 [A] (resolution, 0.1A)
4 Phase -3276.8 to 3276.7 [Degrees] (resolution, 0.1
O
)
5 Del. Power -32768 to 32767 [W] （resolution, 1W）
6 R 0.01 to 655.35 [Ohms] (resolution, 0.01Ω)
7 X -327.68 to 327.67 [Ohms] (resolution, 0.01Ω)
Service
Code
Class Instance Service Name Description of Service
14 (0x0E) Yes Yes Get_Attribute_Single Returns the contents of the
specified attribute.