Instruction Manual

2
Items Supplied
• Wattcher Monitor/Alarm
• 115/230 VAC Power Cord
• DC Cable (2)—25’ Standard Other Lengths Optional
• Interlock Connector—Six-Terminal, Screw-Clamp Plug Connector
• Remote Reset / Auxiliary DC Connector—Four-Terminal Screw-Clamp Plug Connector
Options
Line Sections & Elements
Frequency and power range are governed by the line section and elements selected. Refer to sales catalog for avail-
able models.
Cable Assemblies
DC Cable Assemblies are available for remote rigid line installation. The assemblies are various length of RG-58/U
cable with a DC plug, P/N 7500-076 on one end and a BNC(m) connector installed on the opposite end. See
“Replacement Parts List” on page 21 for cable lengths and part numbers.
Functional Description
Enclosure
The Wattcher RF Monitor/Alarm is enclosed in an aluminum housing intended for a standard 19" rack mount.
Figure 2 Front Panel