User's Manual

BIRD DMR USER MANUAL
6
Revision 2
Keep passwords and other operational information away from unauthorized
personnel!
• Bird Repeater system is an advanced technology system and
should be handled by FCC Licensee or FCC approved staff.
• Read all documentation and warnings before handling the equipment.
• Obey all warning signs on the equipment and in documentation.
• The equipment may get hot during operation, do not operate
outside permitted temperature range and keep away from heat
sensitive material!
• The equipment contains ESD sensitive components. Open the
equipment ONLY in a safe location designed for handling ESD
products and use grounding devices! Opening the unit is not intended
for field maintenance!
• The equipment contains ESD sensitive components. If not handled
with care critical
components may be damaged or destroyed. To
avoid any damage due to ESD standard ESD precautions shall be
used when handling the equipment.
• The product transmits RF signals keep away from Antennas and
other radiating devices.
• Repeaters generate radio signals which are transmitted by the
connected antennas. Installations should always be done so
that the radiation exposure doesn’t exceed the recommendation
set up by local authorities.
• Consult a FCC licensee or other applicable regulation body for
details on RF requirements and safety issues on RF!
• Electrical installation shall be done in accordance with local safety
regulations and laws.
• Make sure to use the equipment only in its intended
applications and on the allowed frequencies.
• Avoid overheating by avoiding sunlight exposure!