Operation Manual

ID Name Class Severity Unit
1 Loss of main AC power 0x0011 Error RU
Description
This is an external alarm and only valid if it is wired up. External alarm 1
triggered.
NOC Actions
Depends what is connected to external alarm 1. If used with UPS this
should be
the loss of AC power alarm. The unit will run on UPS until batteries are
depleted or AC power is restored.
Field Actions See actions at NOC
ID Name Class Severity Unit
2 Battery voltage low 0x0011 Critical RU
Description
This is an external alarm and only valid if it is wired up. External alarm 2
triggered.
NOC Actions
Depends what is connected to external alarm 2. If used with UPS this should be
the battery low alarm. The unit will shut down soon.
Field Actions See actions at NOC
ID Name Class Severity Unit
3 Ext. alarm 3 0x0011 Error RU
Description
This is an external alarm and only valid if it is wired up. External alarm 3
triggered.
NOC Actions Depends what is connected to external alarm 3.
Field Actions See actions at NOC
ID Name Class Severity Unit
4 Ext. alarm 4 0x0011 Warning RU
Description
This is an external alarm and only valid if it is wired up. External alarm 4
triggered.
NOC Actions Depends what is connected to external alarm 4.
Field Actions See actions at NOC
ID Name Class Severity Unit
5 Slave FOR-1 0x0011 Warning RU
Description
Slave FOR-1 lost or alarm from slave FOR. This is used when a unit is equipped
with dual fiber optic remote boards. More information on what is going on can
be found at the redundant connection to the unit.
NOC Actions
Check the alarms on the redundant connection and take action depending on
what they are.
Field Actions See actions at NOC
Troubleshooting
124