Operation Manual

Commissioning
108
Figure 127
8
9
BGW Configuration - DNS Forwarders Setting
10. Select the Ext. Ethernet tab
11. Select "Use eth0 for internet" and "Static IP address" check boxes.
12. Record the existing IP setting in case rolling back to original settings is required.
13. Enter the IP addresses information:
IP Address: 192.168.0.10
Netmask: 255.255.255.0
Gateway IP Address: 192.168.0.1
Figure 128
10
11
13
BGW Configuration - External Ethernet Setting
14. After all the settings have been configured, power cycle the wireless modem.
15. Click on "Status/Statistics." See Figure 129 on page 109 .
16. Select the "Ethernet Status" tab.
Verifiy that "etho" has been assigned a valid IP address.