User's Manual

Install the display7
2.5 mm Allen key
For the final step before powering on your BirdBike, reinstall the display back into
the handlebar so that the Bird logo is at the bottom. Be sure to not pinch the cable
inside of the handlebar while reinstalling. Once reinstalled, use the 2.5mm Allen key
to replace and tighten the screw under the display so that it’s tightened into place
inside of the handlebar.
Connect the one end of the power cable coming from the bottom of the display
to the other end of the power cable that is coming out of the bottom of the frame.
At this point you can power on your BirdBike, but be sure to read through the rest
of this manual before riding.
VFRAME
V

F
RAM
E
12