User's Manual

T URN ONOFF THE HEADLIGHTS
Press and hold the + key for 2 seconds
to turn on the headlight. When the
headlight is on, the display brightness will
also automatically dim. Whenever natural
lighting is insufficient (such as in bad
weather) or when riding in the dark, you
should always turn on the headlight. Press
and hold the + key again for 2 seconds to
switch off the headlight.
BATTERY LEVEL
When the battery is full, the five-segment
battery icon will be fully lit and the number
of bars will decrease as the battery level
decreases. When the battery is low and
needs charging, the battery icon will flash.
ASSIST LEVEL
Short press the + / - buttons to
switch the assist level of the BirdBike and
change the output power of the motor.
Level 0 is no assistance, and level 5 offers
the highest amount of assist. The default
level when the BirdBike is first turned on is
level 5, and each subsequent time it will
default to the last assist level that was used.
ERROR CODE DISPLAY
Error code display: For more information on
error codes, please visit support.bird.co.
When an error code is displayed, please
troubleshoot or contact BirdBike support as
soon as possible as the BirdBike will not be
able to be ridden normally until the error is
resolved.
24
To enter Settings Mode first power on the
BirdBike, then long press and hold
keys +/- at the same time. Once in Settings
Mode you adjust from mph to km/h, set a
speed limit, set wheel diameter, and adjust
the brightness of the display.
While In Settings Mode, you can toggle up
and down with the up (+) and
down (-) buttons. Short press the
power button to adjust the ítem you
want to change, then short press the
power button after making your selection
to save.
To exit Settings Mode just long press the
- button for 2 seconds. Also, while in
Settings Mode if no operation is performed
for 30 seconds, then the display will return
back to normal.
When P2 is displayed in the speed position
while in Settings Mode and the speed limit
value is displayed in the trip position, you
can then adjust the speed limit with the
+/- buttons. The minimum is 7 mph
(12km/h) and the maximum is 20mph
(32km/h). After selecting, short press the
power button to save.
SETTINGS MODE
When P1 is displayed in the speed position
while in Settings Mode, press the
+/- buttons to switch the display between
mph or km/h. After selecting, short press
the power button to save.
MPH & KMH P1
SPEED LIMIT P2