User's Manual

F UNCTIONS OVERVIEW
Power button
Battery capacity display
Switch between
mph and km/h
Assist level
Mileage display
Speed
display
Walk mode
Head light
Error warning
+ button
- button
22
After pressing and holding the - button
for 2 seconds the BirdBike will go into Walk
Mode. The display will show the push
symbol and you will receive
power-assistance while pushing the
BirdBike in more difficult situations, like
going uphill. When you release the button,
Walk Mode will automatically turn off.
POWER ONOFF
Operating Options
DISPLAY INTERFA CE
After long pressing the power button,
the BirdBike will be turned on. While the
power is on, press and hold the power
button again to turn off the power.
After the BirdBike is turned on, the display
defaults to showing real-time speed and
total distance traveled (miles or km). With a
short press of the power button you
can toggle through the total distance
(miles/km) and single trip distance
(miles/km).
The power will automatically shut off after 5
minutes if not being used.
WALK MODE
The power-assisted Walk Mode function
should only be used while pushing the
electric vehicle and never used while riding.