Product Label

Installation Instructions Polycarbonate Bird Spikes
Caution!
READ AND FOLLOW ALL INSTRUCTIONS PRIOR TO ATTEMPTING TO INSTALL BIRD-B-GONE SPIKE -
POLYCARBONATE. SPIKES ARE SHARP...BE SURE TO WEAR GLOVES AND SAFETY EYE WEAR. KEEP
OUT OF REACH OF CHILDREN AND PETS. DO NOT INSTALL WHERE HUMAN PHYSICAL CONTACT
IS POSSIBLE.
1. Thoroughly clean all surfaces before installing Bird
Spikes
.
Suggestion: Use a 10% bleach or ammonia solution to disin-
fect the area. It is important that all debris is removed including
overhanging branches, leaves, and nesting materials before
disinfecting the area.
DUE TO INFECTIOUS DISEASES ASSOCIATED WITH BIRD
FECES, BE SURE TO USE EXTREME CARE WHEN
REMOVING NESTS AND DROPPINGS.
2. Determine method for attaching Bird Spike.
*For Wood: Use wood screws to secure Bird Spikes
into a wood surface. There are two sets of holes between
each “fan” of spikes. Make sure the ends are secured
tightly and at least one screw is placed every six inches.
*For Concrete: Outdoor construction adhesive can be
used to secure Bird Spikes down to a variety of surfaces.
Bird-B-Gone Spike - Polycarbonate has a glue trough
along the base. Bird-B-Gone sells a polyurethane adhesive
meant for outdoor use. Each tube will cover approx. 25
feet of spike. Silicone adhesives are not recommended.
For extra security, screw or bolt down the spikes along
with using an adhesive.
3. When using Adhesives:
- Run a bead line of adhesive down the underside of the
spike. (Illus #1) Also put a dollop of adhesive on each
screw hole, allowing the adhesive to mushroom up for
more eective adhesion.
-Carefully place strip onto the surface. Ensure that no
more than 1 inch of open space is left around the edges
or by the back wall.
4. Adapting to Size:
Bird-B-Gone Spike Polycarbonate comes in 2 foot
sections, but can easily be cut down into smaller
lengths if needed using tin snips, wire cutters, a
hacksaw etc.
If you have any questions regarding Bird Spike Installation call us at 1-800-392-6915 / 949-472-3122
Glue trough for easy
and neat glueing
Oset pre-drilled holes for
screw attachment
Notches for easy
cutting to row
size
Ilustration 1
1”
6”
Bird-B-Gone, Inc. 1-800-392-6915
www.birdbgone.com / email: [e-mail] Fax: [phone]
BIRD B GONE
TM
INC.
All spikes are
4-3/4” tall
Oset pre-drilled holes for
Ilustration 1
20” Ledge/Area
1
“
Patent # US 7243465 US 7596910