User's Manual

Mounting height
< 9.84'(3m) >9.84'(3m)
withoutclip without clip
with clip without clip
Narrow field
Wide field
min. 5
45
Other field adjustments - frontal and lateral inclination
C
7.22'
2
.2 m
A
ntenna clip stored on the back of the antenna module
2.2 m
(7.22')
A
ntenna clip placed on the front of the antenna module
7.22'
2.2 m
min. 1.64' (0.5 m)
max. 8.20' (2.5 m)
min. 1.64' (0.5 m)
max. 8.20' (2.5 m)
min. 3.28' (1.0 m)
max. 13.12' (4.0 m)
min. 1.64' (0.5 m)
max. 6.56' (2.0 m)
3
10 sec.
Testing of the settings
Measure by
walking
according to
ANSI 156-10
D
T
he use of the clip
requires the
amplification (F41)
Use the clip for wide fields according
to the table on the left.
* At mounting heights above 10’,wide
fieldsaresetusing the frontal
inclination angle (section C1) and the
sensitivity (section H).
Other field adjustments - normal and wide detection field
After removing or putting the clip on the antenna,
the power supply must be interrupted for min. 5
sec.
changing
frontal
Inclination
x 3
x 1
8 sec
How to reset to factory settings
changing
lateral
Inclination
Normal
detection field
w/o clip
Wide detection
field with clip