User`s manual

BP-002 User's Manual
- 48 -
Appendix Commands List
Here lists the commands supported in the printer in alphabetical order.
Control commands Functions
HT Horizontal tab
LF Print and line feed
DLE EOT Real-time status transmission
ESC SP Set right-side character spacing
ESC ! Set print mode
ESC $ Set absolute print position
ESC % Select/cancel user-defined character set
ESC & Define user-define characters
ESC * Select bit-image mode
ESC – Turn underline mode on/off
ESC 2 Set default line spacing to 30/203 inch
ESC 3 Set line spacing
ESC = Select peripheral device
ESC ? Cancel user-define character
ESC @ Initialize printer
ESC D Set horizontal tab position
ESC E Turn emphasized mode on/off
ESC J Print and feed paper
ESC M Select character font
ESC R Select the international character set
ESC V Turn 90°clockwise rotation mode on/off
ESC \ Set relative print position
ESC a Select justification
ESC c 5 Enable/disable panel button
ESC d Print and feed n lines
ESC p Generate pulse
ESC t Select code page
ESC { Turn on/off upside-down printing mode
FS ! Select Chinese character mode
FS & Set Chinese language mode
FS - Turn Chinese character underline on /off
FS . Cancel Chinese language mode
FS 2 Define user-define Chinese characters