User`s manual

BP-002 User's Manual
- 30 -
Chapter 5 Specification
5.1 General Specificaion
Item Description
Printing method Thermal line printing
Printing direction Line by line
Dot density 384 dots/ line (203×203 DPI)
Printing speed 100 mm/s
Reliability Print head life:50Km (under special condition), 100 million pulse
Effective printing width 48 mm
Paper feed speed 100 mm/s (Max.)
TF50KS-E (Japan paper co.ltd)
Thermal paper Model
AF50KS-E (JUJO THERMAL)
Width: 57.5 ± 0.5 mm
Weight: 53 ~ 80 g/m
2
Outer diameter: Φ83 mm (Max.)
Thickness: 0.065 ~ 0.15mm
Paper specificaion
*Suggestion: Inner diameter of paper shaft is Φ12mm while the outer
diameter of paper shaft is Φ18mm.
ASCII: 14 international character sets (America, France, Germany, U.K.,
Denmark, Sweden, Italy, Spain I, Japan, Norway, Denmark II, Spain
II, Latin America, Korea)
Character set
Chinese: Big 5 or GB 18030
Line spacing 30/203 inch, or programmable in 1/203 inch increments
Interface
Cash drawer interface + data interface (parallel interface, USB + serial
interface, USB + Ethernet interface, USB interface + Bluetooth and USB
interface + Wi-Fi)
Cash drawer interface: RJ-11, DC12V/1A
Parallel interface: Centronics
USB interface + Serial interface: 2.0 Full-Speed, RS-232C (DB9)
USB interface + Ethernet interface: 2.0 Full-Speed, 10/100Base-T
USB interface + Bluetooth: 2.0 Full-Speed, 2.0/2.1 + EDR
USB interface + Wi-Fi: 2.0 Full-Speed, 802.11b/g/n
Note: Only one of the data interfaces is supplied when leaving the
factory. (According to the specific interface standards.)
Special function
Online parameter settings, Software online update
Buffer memory
2 KB or 6KB (Ethernet model)
ESC/POS Emulation
Character printing command: Support ANK characters, user-define
characters and enlarge Chinese
characters 1-2 times printing, can adjust
character line spacing
Dot image printing command: Support different densities dot images and
downloading image printing
Control command
Linear bar code: UPC-A, UPC-C, EAN-13, EAN-8, CODE39, CODE128,
ITF-25, CODABAR