User`s manual

BP-002 User's Manual
- 28 -
Chapter 4 Installing Paper
The printer can install the paper conveniently, which should be 58mm wide. How to deal with the paper
will be explained in details in this chapter.
4.1 Paper Installation Steps
Note: 1. Don’t touch the thermal print head after printing to avoid being burned.
2. Don’t pull the paper moving directly with your hand.
1. Push the cover-opening button, open the upper cover.
2. Insert the roll paper as shown below.
Note: Paper head should be pulled out by the direction of paper-input slot, but not the opposite.
3. Pull out a small amount of paper.
Figure 4-2 Insert the roll paper
Figure 4-1 Open the upper cover
Upper Cover
Error Correct
Roll Paper