User`s manual

BP-002 User's Manual
- i -
Important Safety Instructions
Read all of these instructions carefully and thoroughly and save them for later reference. The
unauthorized operation would lead to malfunction or accident. Manufacturers have no
responsibilities for the problems which are led by misoperations.
1. Follow all warnings and instructions in the manual as well as marked on the product.
2. Don’t touch the thermal print head with your hand at any moment to avoid the thermal head damaged.
3. Be careful the manual cutter when you are installing the paper.
4. Unplug this product from the power outlet before cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
5. Please don’t use the printer near water.
6. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious
damage to you or the product.
7. Slots and opening on the cabinet and the back or bottom are provided for ventilation. To ensure reliable
operation of the product and to prote ct it from overheating, do not block or cover these openings. The
openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in installation unless proper ventilation is provided.
8. This product should never be placed near or o ver a radiator or heat origin, and should a void of direct
sunshine.
9. Do not locate this product w here the cord will be walked on. When the cord or the plug is mangled,
please stop using and get a new one replaced. Make sure the old one is far away from the printer, so it
can avoid someone who does not know the inside story getting damage.
10. Be sure to use the specified power source. Connection to an improper power source may cause fire or
shock.
11. Do not use in locations subject to high humidity or dust levels. Excessive humidity and dust may cause
equipment damage or fire.
12. Never push objects of any kind into this product though cabinet slots as they may tou ch dangerous
voltage dots or short out parts.
13. Don’t remove the printe r’s out-cover and rep air the printer. When n eeded, call or t ake it to the
professional.
14. If water or other liquid spi lls into this equipment, unplug the power cord immediately, and then contact
your dealer or a service center for advice.
15. To ensure safety, please unplug this product prior to leaving it unused for an extended period. The wall
outlet you plan to connect to should be nearby and unobstructed.
16. Unplug this prod uct from the wall out let and refe r servicing to qualified service person nel under the
following conditions:
a) When the power cord or plug is damaged or frayed.
b) If liquid has been spilt into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally when the operating instructions are followed.
e) If the product has been dropped or the cabinet has been damaged.
f) If the product exhibits a distinct change in performance, it indicates a need for service.
Warning: In order to ensure the printer life, strictly prohibit printing full line full black
exceeding 2 CM.