Installation & Assembly

Page 1 of 1

HARDWARE LIST

A (8) Hex Nuts

B (8) Spring Washers

C (8) Flat Washers

D (1) Open End Wrench

PARTS LIST

E (1) Table Top

F (2) Drop Leafs

G (4) Legs

QTYPART

HARDWARE QTYPART HARDWARE

CARE & MAINTENANCE

The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,

as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.

STEP 1

With the help of a friend, begin assembly by placing Table Top

(E) face down on a clean, smooth surface.

STEP 2

Attach one Leg (G) to bottom side of Table Top (E) on each

corner by sliding threaded rods through the holes and securing

with 2 Flat Washers (C), 2 Spring Washers (B) & 2 Hex Nuts (A)

per leg. Tighten all bolts with Open End Wrench (D) provided.

STEP 3

With the help of a friend, carefully turn table over to its

upright position. The assembly is now complete.

FOR DROP LEAF ONLY

Holding both ends of the

table, slide the table ends

outward to either insert or

remove one or both Drop

Leaf (F) sections. Slide ends

back together securely.

DINING TABLE

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all

components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.