Assembly Instruction

Use the bolt (G), lock washer (D), flat washer (E) in both of hole of seat (B) and chair back (A),

󰾡

Cleaning & Care

Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a

dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that

all connections are tight.

turn the allen wrench (I) to tighten the bolt (G).

Stand chair up on an even surface and

Helpful Tip:

-Instead of applying downward

pressure while reaching

under to tighten bolts,

have someone sit in the

chair while you tighten the bolts.

check that it is balanced.

If there is a slight wobble, apply downward

pressure in the corner where a leg is

uneven. Keeping pressure in that corner,

tighten all bolts.

If balanced,apply downward pressure

evenly in the center and tighten all bolts.

Do not over-tighten beyond hole depth.