Specifications

Any question, please call CUSTOMER SERVICE 1-800-454-2588 Model: EHUV-10-03
16
Honeycomb filter behind the Cage Panel, remove the 8 screws to take out
the filter.
(Back Panel colour should be black in this model no.: EHUV-10-03)
Remove the 8 screws on the back “cage panel” with a Phillips type screw driver. Carefully remove the
honeycomb filter. You can clean the filter in warm water with a good quality humidifier filter cleaner, or
use one capful of liquid bleach or dish cleaning detergent in a large container that holds at least two
gallons of water.
DO NOT PUT IN DISWASHER!
Soak the filter overnight, and then thoroughly rinse with cool clean water.
If after cleaning and rinsing the filter still has scaling or other mineral build up, you may need to replace
the filter which is available from customer service.
Replacing the filter:
 Place the filter back into the back of the unit
 Place the Cage Panel back in place and insert the eight Phillips screws make that you do not over
tighten.
Customer Service provides five-year check up:
BIP offer a five year comprehensive check-up for your Comfort Mist, where all filters will be replaced
and the unit thoroughly cleaned and checked and brought back to “new” condition.
Please contact customer service for details and cost.