User Manual
Table Of Contents
- Table of Contents
- 1 Introduction
- About the Device
- About this Technical Manual
- Intended Medical Use
- Required Expertise
- Residual Risk
- General Safety Instructions
- Electromagnetic Interference
- Operating Conditions
- Maintenance, Care and Disposal
- Device Overview
- Transportation and Setup
- Connections and Cables
- Unit Handling
- Technical Data
- Scope of Delivery
- Electromagnetic Compatibility in Compliance with EN 60601-1-2:2007
- Legend for the Label
- Symbols on the Device
- List of Keywords
38 Appendix
Electromagnetic Compatibility in Compliance with
EN 60601-1-2:2007
As the user, you must ensure that the device is
operated in a suitable electromagnetic environ-
ment.
The following guidelines may not be applicable in
all cases. The propagation of electromagnetic
values is, for example, affected by the absorption
and reflection of structures, objects and people.
This data is for your personal information. There
should be at least 20 cm distance between the
device and the SafeSync Module to avoid interfer-
ence with the device caused by the electromagnetic
fields emitted by the SafeSync Module.
Electromagnetic
Emissions (Table 1)
Units with the warning sign “Transmitter
with non-ionizing radiation at designated
frequency” must not be operated in the envi-
ronment of the device due to potential inter-
ference.
Measuring the
emitted interfer-
ence
Compliance Guidelines for the electromagnetic
environment
RF interference
according to
CISPR 11
Group 1 The device uses RF energy exclusively
for its own function. Therefore, the RF
interference emitted is very low and
not likely to cause any interference in
nearby electronic equipment.
RF interference
according to
CISPR 11
Class B The device is suitable for use in all
establishments. This includes resi-
dences and facilities directly
connected to the public power supply
network that supplies buildings used
for domestic purposes.