User's Manual

150
Technical Data

Rate Adaptation
Cylos DR/DR-T/VR
Max. (sensor or)
activity rate
a)
80...(5)...180 ppm
Sensor Gain auto; 1 ... 40 (in 32 steps)
Automatic Sensor
Gain Off; On
Sensor Threshold Very Low; Low; Medium; High; Very High
Rate Increase 1; 2; 4; 8 ppm/cycle
Rate Decrease 0.1; 0.2; 0.5; 1.0 ppm/cycle
Rate fading On; Off
R Rate Increase 1; 2: 4; 8 ppm/cycle
R Rate Decrease 0.1; 0.2; 0.5; 1.0; 1.2 ppm/cycle
a) In DDIR and DVIR modes for Cylos DR (partially due to the AV delay selected) and VVIR
and VOOR modes in Cylos in general, there are lower maximum sensor rates than
stated here. The programmer will show the respective values.
CLS Parameters Cylos DR, Cylos DR-T, Cylos VR
Maximum CLS rate 80 ... (5) ... 160 ppm
Additional
parameters
CLS dynamics (very low; low; medium; high; very high)
Dynamic runaway protection (on; off)
a)
V
P
is required (yes; no)
a) The pacing rate attained at rest is calculated from the following formula:
basic rate + 20 ppm + 1/8 (basic rate – Closed Loop rate).