Technical Manual

Table Of Contents

First Steps

How Do I Connect the CardioMessenger?

Your CardioMessenger is already configured and is ready for use. You can operate it immediately by

inserting the power plug into the wall outlet. Also consult the included quick reference guide.

WARNING

• Lay the power cord so that there is no risk of strangulation and nobody may stumble.

The outlet must be easily accessible and not be connected to a light switch in order to prevent the

CardioMessenger from accidentally being turned off.

Proceed as follows if the plug has been disconnected during removal from the package or during

shipping:

1. Connect the small plug (micro USB plug) on the right to the CardioMessenger.

The connector port is labeled with the following symbol:

2. Make sure that the marking is on the upper side of the plug.

3. Insert the power plug into the wall outlet.

The CardioMessenger now turns on automatically and performs a self-test.

The CardioMessenger is ready for use once the self-test is completed and the following icons are

displayed:

If this is not the case, please refer to: Error Resolution [Page12].