User Manual

7 First Steps
How Do I Connect the CardioMessenger?
Your CardioMessenger is already pre-installed and supplied ready for use. You can
operate it immediately by inserting the power plug into the wall outlet.
Also consult the included quick reference guide.
However, proceed as follows if the plug has disconnected during removal from the
package or during shipping:
Make sure that the outlet is not connected to a light switch, in order to prevent the
CardioMessenger from accidentally being turned off.
The CardioMessenger now turns on automatically and performs a self-test.
The CardioMessenger is ready for use once the self-test is complete and the
following icons are displayed:
If this is not displayed, please refer to Error Resolution, p. 12
How Do I Use the CardioMessenger?
The CardioMessenger automatically receives the information from your device and
transmits it to the BIOTRONIK Service Center. Therefore, there are only a few points
that you need to consider.
Check once a day whether your CardioMessenger is switched on and ready for use.
This is indicated by the following icons:
If you want to use the CardioMessenger in mobile operation, we recommend that
you make a habit of charging it every night on the bedside table.
1 Connect the small plug (micro USB plug) on the right to the
CardioMessenger.
Make sure that the marking (white arrow) is on the upper side of the
plug.
The connector port is labeled with the following symbol:
2 Insert the power plug into the wall outlet.