User Manual

18 Guidelines

8 Guidelines

Guidelines8399229_ATechnical Man ualCardioMessenger

Smart

Telemetry data for the USA This transmitter is authorized by rule under the Medical Device Radiocommunica-

tion Service (in part 95 of the FCC Rules) and must not cause harmful interference

to stations operating in the 400.150-406.000 MHz band in the Meteorological Aids

(i.e., transmitters and receivers used to communicate weather data), the Meteoro-

logical Satellite, or the Earth Exploration Satellite Services and must accept inter-

ference that may be caused by such stations, including interference that may cause

undesired operation.

This transmitter shall be used only in accordance with the FCC Rules governing the

Medical Device Radiocommunication Service. Analog and digital voice communica-

tions are prohibited. Although this transmitter has been approved by the Federal

Communications Commission, there is no guarantee that it will not receive interfer-

ence or that any particular transmission from this transmitter will be free from

interference.

This device is registered with the Federal Communications Commission under the

following number: FCC ID: QRICMSMART

Electromagnetic

compatibility

Warranty The CardioMessenger and all original components by BIOTRONIK are not subject to

warranty when used, stored, or transported incorrectly or modified. Only use the

original packaging for shipment.

Note: The CardioMessenger is protected from disturbances resulting from elec-

tromagnetic interference, electrostatic discharges, and other sources – including

interference induced by wiring. Interfering electromagnetic emissions from the

CardioMessenger have been minimized. The CardioMessenger therefore meets

the requirements of EN 60601-1-2 in every respect.

Note: Other equipment, for example portable and mobile RF radiocommunica-

tions equipment, may interfere with the CardioMessenger, even if this equipment

complies with CISPR emission requirements. However, this possible interference

does not affect the functionality of the device.