Service manual

User’s Manual—SNAP™ 500 2/1 Printer
6.1 Tape (Web) Guide Position 62
6.2 Tape (Web) Guide Width Adjustments 62
6.3 Auxiliary Feed 62
6.4 Knife Shear Adjustment 62
6.5 Feed Assembly Adjustment 64
7.0 UPGRADING THE PRINTER FIRMWARE 67
7.1 Introduction 67
7.2 Selecting the UPG file 67
7.3 Getting the UPG file 68
7.3.1 Getting UPG file using D2Comm 68
7.3.2 Getting UPG file without using D2Comm 68
7.4 Performing the Upgrade 69
7.4.1 Unzipping the file 69
7.4.2 Upgrading through PCMate 70
7.4.3 Upgrading through USB Flash Drive 73
7.4.4 Upgrading through the Webserver 73
8.0 ELECTRICAL TROUBLESHOOTING 77
8.1 Power Up / Sign On / Communications 77
8.2 Tape / Ink Advance 79
8.3 Print 80
8.4 Cut / Stack 82
8.5 Printer Errors 83
9.0 MECHANICAL TROUBLESHOOTING 87
9.1 Tape 87
9.2 Ink 88
9.3 Print 88
9.4 Knife 88
9.5 Minimum Cut Length 89
10.0 APPENDICES 91
10.1 Ink and Tape Transfer Types 91
10.2 Tape/Ink Transfer Types to Use When Not Found in PCMate 93
10.3 Printer Specifications 95
11.0 WARRANTY POLICY 97
11.1 Service 98
11.2 Option Menu System Flowchart 99