Service manual

User’s Manual—SNAP™ 500 2/1 Printer
3.5 Option Menu System 32
3.5.1 Running Test Patterns 33
3.5.2 Setting / Adjusting Voice Button Volume 35
4.0 MAKING ADJUSTMENTS 37
4.1 Print Head Adjustments 37
4.1.1 Adjusting Print Head Pressure 37
4.1.2 Adjusting Density (Darkness) 38
4.2 Adjusting the Stacker 38
4.2.1 Stacker Position 39
4.2.2 Stacker Angle 39
4.2.3 Platform Angle 40
4.2.4 Height of Stack - Stacker Sensor 40
4.3 Virtual Control Panel 41
4.3.1 Introduction 41
4.3.2 Changing Printer Settings in PCMate (Printer Settings) 42
4.3.3 Print/Cut Adjust (VCP Print/Cut Adjust Tab) 42
4.3.4 Selecting the Printer Language (VCP Options Tab) 43
4.3.5 Setting the Date and Time (VCP Options Tab) 44
4.3.6 Enabling or Disabling the Cutter (VCP Options Tab) 44
4.3.7 Selecting the Print Speed (VCP Options Tab) 44
4.3.8 Selecting the Flagging Mode (VCP Options Tab) 45
4.3.9 Selecting the Sense Mark Type (VCP Options Tab) 45
4.3.10 Setting the Default Transfer Type (VCP Options Tab) 45
4.3.11 Viewing the Life Counts (VCP Versions/History Tab) 46
4.3.12 Firmware Version (VCP Versions/History Tab) 46
4.3.13 Print Quality (VCP Arbor Tension Adjust Tab) 47
4.3.14 Other information on VCP 47
4.4 Web Server 48
4.4.1 Setting the Printer IP Address 48
4.4.2 Obtaining a DHCP Address 48
4.4.3 Determining the DHCP Address 49
4.4.4 Converting the DHCP Address to a Static Address 50
4.4.5 Resetting the Printer to DHCP Mode 51
4.4.6 Viewing and Changing the Printer Settings 52
4.4.7 Troubleshooting the Network Connection 53
5.0 MAINTENANCE 54
5.1 Print Head Cleaning and Handling 54
5.1.1 Handling Techniques 54
5.1.2 Cleaning Procedures 55
5.2 Print Head Replacement 55
5.3 Lubrication 58
5.4 Rotary Knife Assembly 58
5.4.1 Removing and Replacing the Knife Assembly 58
5.4.2 Adjust the Knife Home Position 60
5.5 Knife Blade Cleaning 60
5.5.1 Cleaning Procedure 60
6.0 SERVICE ADJUSTMENTS 62