TP45D2-A7/TP43D2-A7 Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Chapter 1: Introduction ............................................................ 1 1.1 Before You Start......................................................................................... 1 1.2 Package Checklist ..................................................................................... 1 1.3 Motherboard Features.............................................................................. 2 1.4 Rear Panel Connectors.......................................................
TP45D2-A7/TP43D2-A7 CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: 1.2 Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.
TP45D2-A7/TP43D2-A7 TP45D2-A7 TP43D2-A7 PCI slot x3 PCI slot PCI Express Gen2 x 16 slot x1 PCI Express Gen2 x 16 slot x1 PCI Express x 1 slot x2 PCI Express x 1 slot x2 Floppy connector x1 Floppy connector x1 Printer Port Connector x1 Printer Port Connector x1 Serial port Connector x1 Serial port Connector x1 IDE Connector x1 IDE Connector x1 SATA Connector x6 SATA Connector x6 Front Panel Connector x1 Front Panel Connector x1 Front Audio Connector x1 Front Audio Conne
Motherboard Manual 1.5 MOTHERBOARD LAYOUT JATXPWR2 JCFAN1 LGA775 JKBV1 CPU1 JKBMS1 DDR2_B2 JUSB1 DDR2_B1 JUSBV1 DDR2_A2 DDR2_A1 JUSB2 Intel P45/P43 JRJ45USB1 JAUDIOF1 JAUDIO1 JSFAN2 J1 JCDIN1 PEX1_1 JATXPWR1 PEX16_1 LAN JCMOS1 PEX1_2 Intel ICH10 BAT1 CODEC SATA2 SATA3 SATA4 PCI1 SATA5 IDE Super I/O LED_D1 SATA6 LED_D2 PCI2 JSFAN1 IDE1 PCI3 JCOM1 BIOS SATA1 JPRNT1 JUSBV2 RSTSW2 FDD1 JUSB3 JUSB4 JUSB5 JPANEL1 PWRSW1 st Note: ■ represents the 1 pin.
TP45D2-A7/TP43D2-A7 CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Pin Cap Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle.
Motherboard Manual Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1: Step 2-2: Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1. This completes the installation.
TP45D2-A7/TP43D2-A7 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY 8 DDR2_B1 DDR2_B2 DDR2_A1 DDR2_A2 A. Memory Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
TP45D2-A7/TP43D2-A7 B. Memory Capacity DIMM Socket Location DDR2 Module DDR2_A1 256MB/512MB/1GB/2GB DDR2_A2 256MB/512MB/1GB/2GB DDR2_B1 256MB/512MB/1GB/2GB DDR2_B2 256MB/512MB/1GB/2GB Total Memory Size Max is 8GB. C. Dual Channel Memory installation To trigger the Dual Channel function of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pairs, shown in the following table.
Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 2 34 1 33 IDE1: Hard Disk Connector The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
TP45D2-A7/TP43D2-A7 PEX16_1: PCI-Express Gen2 x16 Slot - PCI-Express 2.0 compliant. Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally. PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins. 2X bandwidth over the PCI-Express 1.1 architecture. PEX1_1/PEX1_2: PCI-Express x1 Slots - PCI-Express 1.1 compliant. Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express supports a raw bit-rate of 2.
Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS JPANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
TP45D2-A7/TP43D2-A7 JATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 12 24 1 13 Pin 1 2 3 4 5 6 7 8 9 10 11 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
Motherboard Manual J1: Auxiliary Power for Graphics This connector is an auxiliary power connection for graphics cards. Exclusive power for the graphics card provides better graphics performance. Pin Assignment 1 2 3 4 4 +12V Ground Ground VCC 1 SATA1~SATA6: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 6 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
TP45D2-A7/TP43D2-A7 JUSB3/JUSB4/JUSB5: Headers for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. JUSB4 JUSB3 JUSB5 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC JAUDIOF1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel.
Motherboard Manual JCDIN1: CD-ROM Audio-in Connector This connector allows user to connect the audio source from the variaty devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.. Pin 1 2 3 4 1 4 Assignment Left Channel Input Ground Ground Right Channel Input JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard.
TP45D2-A7/TP43D2-A7 On-Board LED Indicators There are 2 LED indicators on the motherboard to show system status. LED_D1 LED_D2 LED_D1 and LED_D2: These 2 LED indicate system power on diagnostics. Please refer to the table below for different messages: LED_D1 ON ON OFF OFF LED_D2 ON OFF ON OFF Message Normal Memory Error VGA Error Abnormal: CPU / Chipset error. On-Board Buttons There are 2 on-board buttons. RSTSW2 PWRSW1 PWRSW1: This is an on-board Power Switch button.
Motherboard Manual JPRNT1: Printer Port Connector This header allows you to connect printer on the PC. 2 1 25 Pin 1 2 3 4 5 6 -Strobe -ALF Data 0 -Error Data 1 -Init Assignment Pin 14 15 16 17 18 19 Ground Data 6 Ground Data 7 Ground -ACK Assignment 7 8 9 10 11 12 13 Data 2 -Scltin Data 3 Ground Data 4 Ground Data 5 20 21 22 23 24 25 26 Ground Busy Ground PE Ground SCLT Key JCOM1: Serial port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port.
TP45D2-A7/TP43D2-A7 JUSBV1/JUSBV2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at JUSB1/JUSB2/JRJ45USB1. JUSBV2: +5V for USB ports at JUSB3/JUSB4/JUSB5. Pin 2-3 Close: JUSBV1: +5V STB for USB ports at JUSB1/JUSB2/ JRJ45USB1. JUSBV2: +5V STB for USB ports at JUSB3/JUSB4/JUSB5. 3 3 1 1 Pin 1-2 close JUSBV1 3 JUSBV2 1 3 1 Pin 2-3 close JKBV1: Power Source Header for PS/2 Keyboard and Mouse 3 1 3 1 Pin 1-2 close +5V for PS/2 keyboard and mouse.
Motherboard Manual CHAPTER 4: T-SERIES BIOS & SOFTWARE 4.1 T-SERIES BIOS T-Series BIOS Features Overclocking Navigator Engine (O.N.E.) Memory Integration Test (M.I.T., under Overclock Navigator Engine) BIO-Flasher: Update BIOS file from USB Flash Drive or FDD Self Recovery System (S.R.S) Smart Fan Function CMOS Reloading Program !! WARNING !! For better system performance, the BIOS firmware is being continuously updated.
TP45D2-A7/TP43D2-A7 Manual Overclock System (M.O.S.) MOS is designed for experienced overclock users. It allows users to customize personal overclock settings. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset O.N.E Over-Clocking Navigator setting Exit Options WARNING: Setting wrong values in below sections may cause system to malfunction.
Motherboard Manual Over Clock Retry Count This item allows you to set the overclock fail retry times. FSB(Bsel) To NorthBridge Latch This item allows you to select the FSB Frequency. DRAM Frequency To get better system performance, sometimes downgrading the memory frequency is necessary when CPU frequency is adjusted over the upper limit. DDR2 Enhanced Mode This item allows you to control the DDR2 ram enhanced mode. DRAM Timing Configuration Enter this item for more advanced DRAM timing settings.
TP45D2-A7/TP43D2-A7 V6 Tech Engine This engine will make a good over-clock performance. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset Exit O.N.E Over-Clocking Navigator setting Options WARNING: Setting wrong values in below sections may cause system to malfunction.
Motherboard Manual Notices: Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. B. Memory Integration Test (M.I.T.) This function is under “Overclocking Navigator Engine” item. MIT allows users to test memory compatibilities, and no extra devices or software are needed. Step 1 The default setting under this item is “Disabled”; the condition parameter should be changed to “Enable” to proceed this test.
TP45D2-A7/TP43D2-A7 C. BIO-Flasher BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, save the BIOS file into a USB pen drive or a floppy disk. 3.
Motherboard Manual D. Self Recovery System (S.R.S.) This function can’t be seen under BIOS setup; and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions. When the system hangs up, S.R.S. will automatically log in the default BIOS setting, and all overclock settings will be re-configured. E. Smart Fan Function Smart Fan Function is under “Smart Fan Configuration” in “Advanced Menu”.
TP45D2-A7/TP43D2-A7 Smart Fan Calibration Choose this item and then the BIOS will automatically test and detect the CPU/System fan functions and show CPU/System fan speed. Control Mode This item provides several operation modes of the fan. Fan Ctrl OFF(℃) If the CPU/System temperature is lower than the set value, the CPU/ System fan will turn off. The range is from 0~127, with an interval of 1. Fan Ctrl On(℃) The CPU/System fan starts to work when CPU/System temperature arrives to this set value.
Motherboard Manual 4.2 T-SERIES SOFTWARE Installing T-Series Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Auto-run function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation.
TP45D2-A7/TP43D2-A7 Over Clock Panel Restore Default Settings AUTO Over-Clock V3/V6/V9 Engine Real-time Ove r-clock Manual Adjust CPU Clock Test & Apply Manual Setting s AUTO User can click this button and the utility will set the best and stable performance and frequency automatically. A warning dialog as below will show up to notify you that the system may become unstable, click on “OK” to continue.
Motherboard Manual Then the utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, launch the utility again and the utility will load the previously verified best and stable frequency. V3 / V6 / V9 Provide user the ability to do real-time over-clock adjustment. For beginners in over-clock field, this is a powerful feature to increase system performance. V3 Engine This engine will make a good over-clock performance.
TP45D2-A7/TP43D2-A7 Over Voltage Panel Manual Adjust CPU/Memo ry/Chipset/FSB Voltage CPU Voltage This function allows user to adjust CPU voltage. or “-“ to decrease the CPU voltage. Click on “+” to increase Memory Voltage This function allows user to adjust Memory voltage. increase or “-“ to decrease the Memory voltage. Click on “+” to Chip Voltage This function allows user to adjust Chipset voltage. increase or “-“ to decrease the Chipset voltage.
Motherboard Manual About Panel In this panel, you can get model name and other system information that may related to over-clocking. You can also get the version number of this software. Note Because the Over Clock and Over Voltage features are controlled by several separate chipset, the utility divides these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but it will not interfere with other panels’ functions.
TP45D2-A7/TP43D2-A7 eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem. Before you use this utility, please set Outlook Express as your default e-mail client application program. represent s import ant *information that you must provide.
Motherboard Manual Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail. We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.
TP45D2-A7/TP43D2-A7 BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information AMI BIOS Clear CMOS function (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file Once click on this button, the saving dialog will show. Choose the position to save file and enter file name.
Motherboard Manual Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.
TP45D2-A7/TP43D2-A7 CHAPTER 5: USEFUL HELP 5.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
Motherboard Manual 5.2 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3.
TP45D2-A7/TP43D2-A7 5.3 AMI BIOS BEEP CODE Boot Block Beep Codes Number of Beeps 1 2 3 4 5 7 10 11 12 13 Description No media present. (Insert diskette in floppy drive A:) “AMIBOOT.ROM” file not found in root directory of diskette in A: Insert next diskette if multiple diskettes are used for recovery Flash Programming successful File read error No Flash EPROM detected Flash Erase error Flash Program error “AMIBOOT.
Motherboard Manual 5.4 TROUBLESHOOTING Probable 1. Solution No power to the system at all 1. Make sure power cable is Power light don’t illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on keyboard does not turn on. System inoperative. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard drive is spinning.
TP45D2-A7/TP43D2-A7 This page is intentionally left blank.
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN TP45D2-A7 CPU TP43D2-A7 LGA 775 LGA 775 Intel Core2Duo / Core2Quad / Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Prozessoren Celeron 4xx Prozessoren Unterstützt Execute Disable Bit / Enhanced Intel Unterstützt Execute Disable Bit / Enhanced Intel SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended FSB Chipsatz Super
TP45D2-A7/TP43D2-A7 TP45D2-A7 HD TP43D2-A7 ALC662 ALC662 Audio-Unters Unterstützt High-Definition Audio tützung Steckplätze Unterstützt High-Definition Audio 5.1-Kanal-Audioausgabe 5.
Motherboard Manual FRANCE TP45D2-A7 UC TP43D2-A7 LGA 775 LGA 775 Processeurs Intel Core2Duo / Core2Quad / Processeurs Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx Prend en charge les technologies d'exécution de Prend en charge les technologies d'exécution de bit de désactivation / Intel SpeedStep® bit de désactivation / Intel SpeedStep® optimisée/ d'architecture Intel 64 / de mémoire optimisée/ d'architectu
TP45D2-A7/TP43D2-A7 TP45D2-A7 TP43D2-A7 Prise en ALC662 ALC662 charge Prise en charge de l'audio haute définition Prise en charge de l'audio haute définition audio HD Sortie audio à 5.1 voies Sortie audio à 5.
Motherboard Manual ITALIAN TP45D2-A7 CPU TP43D2-A7 LGA 775 LGA 775 Processore Intel Core2Duo / Core2Quad / Processore Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx Supporto di Execute Disable Bit / Enhanced Supporto di Execute Disable Bit / Enhanced Intel SpeedStep® / Architettura Intel 64 / Intel SpeedStep® / Architettura Intel 64 / FSB Chipset Super I/O Tecnologia Extended Memory 64 / Tecnologia Extended
TP45D2-A7/TP43D2-A7 TP45D2-A7 Supporto audio HD ALC662 Supporto audio High-Definition (HD) Supporto audio High-Definition (HD) Uscita audio 5.1 canali Uscita audio 5.
Motherboard Manual SPANISH TP45D2-A7 CPU TP43D2-A7 LGA 775 LGA 775 Procesador Intel Core2Duo / Core2Quad / Procesador Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx Admite Bit de deshabilitación de ejecución / Intel Admite Bit de deshabilitación de ejecución / Intel SpeedStep® Mejorado / Intel Architecture-64 / SpeedStep® Mejorado / Intel Architecture-64 / Tecnología Extended Memory 64 / Tecnología de Tecnologí
TP45D2-A7/TP43D2-A7 TP45D2-A7 Soporte de sonido HD Ranuras TP43D2-A7 ALC662 ALC662 Soporte de sonido de Alta Definición Soporte de sonido de Alta Definición Salida de sonido de 5.1 canales Salida de sonido de 5.
Motherboard Manual PORTUGUESE TP45D2-A7 CPU TP43D2-A7 LGA 775 LGA 775 Processador Intel Core2Duo / Core2Quad / Processador Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx Suporta as tecnologias Execute Disable Bit / Suporta as tecnologias Execute Disable Bit / Enhanced Intel SpeedStep® / Intel Arquitecture Enhanced Intel SpeedStep® / Intel Arquitecture -64 / Extended Memory 64 / Virtualization FSB Chipset -64
TP45D2-A7/TP43D2-A7 TP45D2-A7 Ranhuras TP43D2-A7 Ranhura PCI x3 Ranhura PCI x3 x1 Ranhura PCI Express Gen2 x16 x1 Ranhura PCI Express Gen2 x16 Ranhura PCI Express x 1 x2 Ranhura PCI Express x 1 x2 Conector da unidade de disquetes x1 Conector da unidade de disquetes x1 Conector da para impressora x1 Conector da para impressora x1 Porta série x1 Porta série x1 Conector IDE x1 Conector IDE x1 Conector SATA x6 Conector SATA x6 Conector do painel frontal x1 Conector do painel f
Motherboard Manual POLISH TP45D2-A7 Procesor TP43D2-A7 LGA 775 LGA 775 Procesor Intel Core2Duo / Core2Quad / Procesor Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx Celeron 4xx Obsługa Execute Disable Bit / Enhanced Intel Obsługa Execute Disable Bit / Enhanced Intel SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended FSB Chipset Memory 64 Technology / Virtualization Memory 64 Te
TP45D2-A7/TP43D2-A7 TP45D2-A7 Gniazda Złącza TP43D2-A7 Gniazdo PCI x3 Gniazdo PCI x3 Gniazdo PCI Express Gen2 x16 x1 Gniazdo PCI Express Gen2 x16 x1 Gniazdo PCI Express x 1 x2 Gniazdo PCI Express x 1 x2 Złącze napędu dyskietek x1 Złącze napędu dyskietek x1 x1 Złącze Port drukarki x1 Złącze Port drukarki Port szeregowy x1 Port szeregowy x1 Złącze IDE x1 Złącze IDE x1 Złącze SATA x6 Złącze SATA x6 Złącze panela przedniego x1 Złącze panela przedniego x1 Przednie złącze aud
Motherboard Manual RUSSIAN TP45D2-A7 CPU TP43D2-A7 LGA 775 LGA 775 Процессор Intel Core2Duo / Core2Quad / Процессор Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / (центральн Celeron 4xx Celeron 4xx ый Поддержка технологий Execute Disable Bit / Поддержка технологий Execute Disable Bit / процессор) Enhanced Intel SpeedStep® / Intel Enhanced Intel SpeedStep® / Intel Architecture-64 / Extended Memory 64 Architecture-64 / Extended Me
TP45D2-A7/TP43D2-A7 TP45D2-A7 Звуковая поддержка жесткого диска Слоты TP43D2-A7 ALC662 ALC662 Звуковая поддержка High-Definition Звуковая поддержка High-Definition 5.1канальный звуковой выход 5.
Motherboard Manual ARABIC TP43D2-A7 TP45D2-A7 LGA 775 LGA 775 Intel Core2Duo / Core2Quad /ﻣﻌﺎﻟﺠﺎت Intel Core2Duo / Core2Quad /ﻣﻌﺎﻟﺠﺎت Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﺑﺘﺮدد ﻳﺼﻞ إﻟﻰ Celeron 4xx ﺑﺘﺮدد ﻳﺼﻞ إﻟﻰ Celeron 4xx اﻟﻤﺮآﺰﻳﺔ Execute Disable Bit / Enhanced Intelﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت Execute Disable Bit / Enhanced Intelﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت SpeedStep® / Intel Architecture-64 / Extended Speed
TP45D2-A7/TP43D2-A7 TP45D2-A7 دﻋﻢ اﻝﺼﻮت ﻋﺎﻝﻲ اﻝﺘﻌﺮیﻒ TP43D2-A7 ALC662 ALC662 ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻣﻦ Intelﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻣﻦ 5.1ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت 5.
Motherboard Manual JAPANESE TP45D2-A7 CPU TP43D2-A7 LGA 775 LGA 775 Intel Core2Duo / Core2Quad / Intel Core2Duo / Core2Quad / Pentium Dual-Core / Celeron Dual-Core / Pentium Dual-Core / Celeron Dual-Core / Celeron 4xx processor Celeron 4xx processor Execute Disable Bit / Enhanced Intel Execute Disable Bit / Enhanced Intel SpeedStep® / Intel Architecture-64 / Extended SpeedStep® / Intel Architecture-64 / Extended FSB チップセット Memory 64 Technology / Virtualization Memory 64 Technology / Virtual
TP45D2-A7/TP43D2-A7 TP45D2-A7 HDオーディ オのサポート スロット ALC662 ハイデフィニションオーディオのサポート ハイデフィニションオーディオのサポート 5.1 チャンネルオーディオアウト 5.