User`s manual

Biostar T
Biostar TBiostar T
Biostar T-
--
-Series
SeriesSeries
Series TF
TFTF
TForce4
orce4orce4
orce4/ TForce4 U
/ TForce4 U/ TForce4 U
/ TForce4 U
User’s Manual
7
CD-ROM Audio-in Connector: JCDIN1
This connector allows user to connect the audio source from a variety of devices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV tuner card etc..
Pin Assignment
1 Left channel input
2 Ground
3 Ground
BIOS
Codec
JCDIN1
41
4 Right channel input
Power Source Headers for USB Ports: J1394_USBV1/JUSBV1
Pin 1-2 Close:
J1394_USBV1: +5V for USB ports at J1394_USB1 and JUSBLAN1.
JUSBV1: +5V for front USB headers (JUSB1/JUSB2/JUSB3).
Pin 2-3 Close:
J1394_USBV1: USB ports at J1394_USB1 and JUSBLAN1 are powered with
+5V standby voltage.
JUSBV1: Front USB headers (JUSB1/JUSB2/JUSB3) are powered with +5V
standby voltage.
BIO S
Codec
J1394_USBV1
JUSBV1
31
31
1
3
Pin 1-2 Close
1
3
Pin 2-3 Close
Note:
In order to support this function
“Power-on system via USB
device,”
“J1394_USBV1/JUSBV1” jumper
cap should be placed on Pin 2-3
individually.
Headers for USB Ports at Front Panel: JUSB1~JUSB3
This connector allows user to connect additional USB cables at PC front panel,
and also can be connected with internal USB devices, like USB card reader.
Pin Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
8 Ground
9 Key
10 NC
Power Source Header for PS/2 Keyboard/Mouse: JKBMSV1
Pin 1-2 Close: +5V for PS/2 keyboard and mouse..
Pin 2-3 Close: PS/2 keyboard and mouse are powered with +5V standby
voltage.
BIOS
Codec
JKBMSV1
1
3
1
3
Pin 1-2 close
1
3
Pin 2-3 close
Note: In order to support this
function “Power-on system via
keyboard and mouse”,
“JKBMSV1” jumper cap should
be placed on Pin 2-3.