User`s manual

Biostar T
Biostar TBiostar T
Biostar T-
--
-Series
SeriesSeries
Series TF
TFTF
TForce4
orce4orce4
orce4/ TForce4 U
/ TForce4 U/ TForce4 U
/ TForce4 U
User’s Manual
5
2.3 PERIPHERALS
A. Card and I/O Slots:
Floppy Disk Connector: FDD1
The motherboard provides a standard floppy disk connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector
supports the provided floppy drive ribbon cables.
BIOS
Codec
1
2
33
34
Hard Disk Connectors: IDE1/IDE2
The motherboard has two 32-bit Enhanced PCI IDE Controllers that provide
PIO Mode 0~5, Bus Master, and Ultra DMA 33/66/100/133 functionality. It
has two HDD connectors IDE1 (primary) and IDE2 (secondary). The IDE
connectors can connect a master and a slave drive, so you can connect up
to four hard disk drives. The first hard drive should always be connected to
IDE1.
BI OS
Codec
1
2
39
40
IDE2
IDE1
Peripheral Component Interconnect Slots: PCI1~PCI3
This motherboard is equipped with 3 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
BIOS
Code c
PCI1
PCI3
PCI2
PCI-Express Slots
PCI-EX16:
- PCI Express 1.0a compliant.
- Maximum bandwidth is up to 4GB/s per direction.
PEX1-1/PEX1-2:
- PCI Express 1.0a compliant.
- Maximum bandwidth is up to 250MB/s per direction.
BIO S
Codec
PCI-E X16
PCI-EX x1
PEX1-2
PCI-EX x1
PEX1-1