User`s manual
TForce4
TForce4 TForce4
TForce4 SLI
SLISLI
SLI
32
DRAM Configuration
Timing Mode
DDR Timing Setting by SPD or ITEM.
The Choices: Auto (Default), Manual.
CAS# Latency(Tcl)
This field specify the cas# latency, i.e. cas# to read data valid.
The Choices: CL=2.5(Default), CL=3.0, CL=2.0,
Min RAS# active time (Tras)
This field specifies the minimum RAS# active time. Typically -45-60 Nsec.
The Choices: 8T(Default).
RAS# to CAS# Delay (Trcd)
This field specifies the RAS# to CAS# Delay to read/ write command to the same
bank. Typically -20 Nsec.
The Choices: 4T(Default).
Row precharge Time (Trp)
This field specifies the Row precharge Time. Precharge to Active or
Auto-Refresh of the same bank. Typically 20-24 Nsec.
The Choices: 2T (Default).
H/W memory hole Remapping
The Choices: Disabled (default), Enabled.