User`s manual

Biostar T-Series TForce4 SLI

Us e r’s M anual

Headers for USB Ports at Front Panel: JUSB1~JU SB3

This connector allows user to connect additional USB cables at PC front panel,

and also can be connected with internal USB devices, like USB card reader.

Assignment

1 +5V (f used)

2 +5V (f used)

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

210

JUSB1

JUSB2

JUSB3

10 NC

Case Open Header: JCI1

This connector allows system to monitor PC case open status. If the signal has

been triggered, it will record to the CMOS and show the message on next boot-up.

Assignment

1 Case open sig nal

2 Ground

Clear CMOS Header: JCMOS1

By placing the jumper on pin 2-3, it allows user to restore the BIOS safe setting

and the CMOS data, please carefully follow the procedures to avoid damaging the

motherboard.

Pin 1-2 Cl ose:

Normal Oper ation (default ).

Pin 2-3 Cl ose:

Clear CMOS dat a.

Clear CMOS Procedures:※

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 Close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 Close”.

5. Power on the AC.

6. Reset your desired password or clear the CMOS data.