User`s manual

Biostar T
Biostar TBiostar T
Biostar T-
--
-Series
SeriesSeries
Series TF
TFTF
TForce4
orce4orce4
orce4 SLI
SLI SLI
SLI
User’s Manual
7
Power Source Header for PS/2 Keyboard/Mouse: JKBMSV1
Pin 1-2 Close: +5V for PS/2 keyboard and mouse.
Pin 2-3 Close: PS/2 keyboard and mouse are powered with +5V standby voltage.
1
3
1
3
Pin 1-2 close
1
3
Pin 2-3 close
Note: In order to support this function
“Power-on system via keyboard and
mouse”, “JKBMSV1” jumper cap
should be placed on Pin 2-3.
Power Source Headers for USB Ports at Back Panel: J1394_USBV1
Pin 1-2 Close: +5V for USB ports at J1394_USB1 and JUSBLAN1.
Pin 2-3 Close: USB ports at J1394_USB1 and JUSBLAN1 are powered with +5V
standby voltage.
1
3
1
3
Pin 1-2 Close
1
3
Pin 2-3 Close
Note:
In order to support this function
“Power-on system via USB device,”
J1394_USBV1 jumper cap should be
placed on Pin 2-3 individually.
Front Panel Audio-out Header: JAUDIO2
This connector will allow user to connect with the front audio output headers on the
PC case. It will disable the output on back panel audio connectors.
Pin Assignment
1 MIC-in/
Stereo MIC-in R
2 Ground
3 Stereo MIC-in L
4 Audio power
5 Right line-out/
Speaker-out Right.
6 Right line-out/
Speaker-out Right
7 Reserved
8 Key
9 Left line-out/
Speaker-out Left
10 Left line-out/
Speaker-out Left
11 Right line-in
(optional)
12 Right line-in
(optional)
13 Left line-in (optional)
14
2
1
13
14 Left line-in (optional)
CD-ROM Audio-in Connector: JCDIN1
This connector allows user to connect the audio source from a variety of devices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV tuner card etc..
Pin Assignment
1 Left channel input
2 Ground
3 Ground
4
1
4 Right channel input