Owner's Manual

Installing and Configuring the TF680i SLI Deluxe Motherboard

Table 2. Front Panel Header Pins

Pin Signal In/Out Description

1 HD_PWR Out Hard dis k LED pull-up to +5V

HD_LED

3 HDA# Out Hard disk active LED

2 HDR_BLNK_ GRN Out Front panel gree n light

PWRLED

4 HDR_BLNK_YEL Out Front panel yellow light

5 GND Ground

RESET

7 FP_RE SET# In Reset switch

6 SWITCH_ON# In Power switch

PWRSW

8 GND Ground

No Connect

Empty

IEEE 1394a (Optional)

The IEEE 1394 expansion cable bracket( optional) is provided in the box but if

you do not require the additional external connections, you do not need to

install it.

1. Secure the bracket to either the front or rear panel of your chassis (not all

chassis are equipped with the front panel option).

2. Connect the two ends of the cables to the IEEE 2394 connectors on the

motherboard.

Table 3. IEEE 1394a Connector Pins

Connector Pin Signal

IEEE 1 394 a Connector

1 TPA+

2 TPA-

3 GND

4 GND

5 TPB+

6 TPB-

7 +12V

8 +12V

9 Empty

10 GND