Owner's Manual

H ardware Installation
19
8-pin ATX 12V Power (PW R2)
PWR2, the 8-pin ATX 12V power connection, is used to provide power to the
CPU. Align the pins to the connector and press firmly until seated.
It i s strongly recommended that you use an 8-pin ATX 12V
power supply; however, if you have a four-pin power supply,
plug the connector to pins 1, 2, 5, and 6 as shown.
Auxiliary Power for Graphics (PWR3)
The PWR3 connector is an auxiliary power connection for graphics cards.
Exclusive power for the graphics card provides better graphics performance.
GND 12V
1
8 4
5
1
5
Connect a four-pin
power plug t o pins
1, 2, 5, a nd 6.
GND +1.2
+5V GND