User`s manual

TF520 A2+/TF560 A2+
33
SYS FAN1 Control By
The Choice “smart” can make your northbridge FAN to reduce noise.
The Choices: Always ON (default), Smart.
CPU FAN Control By
The Choice “smart” can make your CPU FAN to reduce noise.
The Choices: Always ON (default), Smart.
CPU Fan Off<℃>
If the CPU Temperature is lower than the set value, FAN will turn off.
The Choices: Min=0,.Max=20, Key in a DEC number.
CPU Fan Start<℃>
CPU fan starts to work under smart fan function when arrive this set
value.
The Choices: Min=0,.Max=50, Key in a DEC number.
CPU Fan Full speed <℃>
When CPU temperature is reach the set value, the CPU fan will work
under Full Speed.
The Choices: Min=0,.Max=80, Key in a DEC number.
Start PWM Value
When CPU temperature arrives to the set value, the CP U fan will work
under Smart Fan F unction mode. The range is from 0~127, with an
interval of 1.
The Choices: Min=0,.Max=127, Key in a DEC number.
Shutdown Temperature
This item allows you to set up the CPU shutdown Temperature. This item is
only effective under Windows 98 ACPI mode.
The Choices: Disabled, 60℃/ 140℉, 65℃/ 149℉, 70℃/ 158℉, 75℃/ 167℉,
80℃/ 176℉(Default), 85℃/ 185℉, 90℃/ 194℉.
Show H/W Monitor in POST
If you co mputer contains a monitoring system, it will s how P C health status
during POST stage. The item offers several different delay times.
The Choices: Enabled (default), Disabled.