TA990FXE Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Chapter 1: Introduction ........................................ 1 1.1 1.2 1.3 1.4 1.5 Before You Start ................................................................................ 1 Package Checklist ............................................................................. 1 Motherboard Features...................................................................... 2 Rear Panel Connectors ..................................................................... 3 Motherboard Layout...
TA990FXE CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: 1.2 Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC CPU FSB Chipset Super I/O Main Memory Socket AM3+ AMD 64 Architecture enables 32 and 64 bit AMD Sempron / Phenom II / Athlon II / FX computing processors Supports Hyper Transport 3.0 Support HyperTransport 3.0 Supports up to 5.
TA990FXE SPEC USB3.0 Connector x1 Each connector supports 2 front panel USB3.
Motherboard Manual MOTHERBOARD LAYOUT NB_PH_ LE D PH1_ D1 PH3_ D3 PH2_ D2 PH4_ D4 1.5 KBMS1 CPU_FAN1 SPDIF1 DD R3_B2 DD R3_B1 USB_1394_ ESATA1 DD R3_A2 Socke t AM 3+ U SB1 DD R3_A1 ATXPWR2 ATXPWR1 RJ45USB1 JUSBV1 AUDIO1 AMD 990FX JC MOS1 AUXPWR1 BAT1 SYS_FAN2 PEX16_1 LAN AMD SB950 PEX1_1 SATA2 BIOS PEX16_2 Codec SATA1 PEX16_3 SATA3 Super I/O PCI1 PCI2 F_AUDIO1 C IR1 F_USB1 J_COM1 F_1394A1 JFRONT_USB3_1 SYS_FAN1 F_USB2 JSPDIFOUT1 Note: ■ represents the 1st pin.
TA990FXE CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 2: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Motherboard Manual Step 3: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the CPU_FAN1. This completes the installation.
TA990FXE 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY 8 DDR 3_B2 DDR 3_B1 DDR 3_A2 DDR 3_A1 A. DDR3 Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
TA990FXE B. Memory Capacity DIMM Socket Location DDR3 Module DDR3_A1 512MB/1GB/2GB/4GB/8GB DDR3_A2 512MB/1GB/2GB/4GB/8GB DDR3_B1 512MB/1GB/2GB/4GB/8GB DDR3_B2 512MB/1GB/2GB/4GB/8GB Total Memory Size Max is 32GB. C. Dual Channel Memory Installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table.
Motherboard Manual 2.4 CONNECTORS AND SLOTS SATA1~SATA3: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 5 channels SATA interface, it satisfies the SATA 3.0 spec and with transfer rate of 6.0Gb/s. SATA1-U SATA2- U SATA1- L SATA2- L Pin 1 2 3 4 5 6 7 SATA3 7 4 Assignment Ground TX+ TXGround RXRX+ Ground 1 AUXPWR1: Auxiliary Power for Graphics This connector is an auxiliary power connection for graphics cards.
TA990FXE ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 12 24 1 13 Pin 1 2 3 4 5 6 7 8 9 10 11 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V Note: Before you power on the system, please make sure that both ATXPWR1 and ATXPWR2 connectors have been plugged-in.
Motherboard Manual PEX16_1 ~ PEX16_3: PCI-Express Gen2 x16 Slots - PCI-Express 2.0 compliant. Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally. PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins. PEX16_1 & PEX16_2 slots are reserved for graphic or video cards. PEX16_3: PCI-Express Gen2 x4 Slot - PCI-Express 2.0 compliant.
TA990FXE CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS PANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
Motherboard Manual JCMOS1: Clear CMOS Header Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default). 1 3 1 3 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures: 1. 2. 3. 4. 5. 6. Remove AC power line. Set the jumper to “Pin 2-3 close”. Wait for five seconds. Set the jumper to “Pin 1-2 close”. Power on the AC.
TA990FXE F_AUDIO1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC’97 connector is not acceptable. 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment Mic Left in Ground Mic Right in GPIO Right line in Jack Sense Front Sense Key Left line in Jack Sense JSPDIFOUT1: Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF output header.
Motherboard Manual CIR1: Consumer IR Connector This header is for infrared remote control and communication. Pin 1 2 3 4 5 6 Assignment IrDA serial input Ground Ground Key IrDA serial output IR Power 2 6 1 5 JFRONT_USB3_1: Header for USB 3.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader.
TA990FXE F_1394A1: IEEE 1394 Header This header allows user to connect IEEE 1394 device. 2 10 1 9 Pin 1 2 3 4 5 6 7 8 9 10 Assignment TPA1+ TPA1GND GND TPB1+ TPB1VCC VCC N/A KEY BIOS POST Code/CPU Temperature Indicator This indicator will show POST code while booting. After the booting sequence, it will show current CPU temperature through hexadecimal figure. Please refer to Chapter 7.4 for all the BIOS POST codes, and Chapter 7.5 for conversion of hexadecimal and decimal system.
Motherboard Manual F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel These headers allow user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. F_USB2 F_US B1 10 9 2 1 Pin 1 2 3 4 5 6 7 8 9 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key 10 NC JUSBV1/JUSBV2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at USB1/USB_1394_ESATA1/RJ45USB1.
TA990FXE On-Board LED Indicators NB_PH_LED PH1_ D1 PH2_ D2 PH3_ D3 PH4_ D4 There are 5 LED indicators showing system status. NB_PH_LED: NB Power Status Indicators PH1_D1/PH2_D2/PH3_D3/PH4_D4: CPU Power Status Indicators Please refer to the tables below for specific messages: LED ON OFF Phase Indicator Phase Active Phase Disable On-Board Buttons There are 2 on-board buttons. SW_RST1 SW_PWR1 SW_RST1: Reset button. SW_PWR1: Power Switch button.
Motherboard Manual CHAPTER 4: CROSSFIREX FUNCTION 4.1 CROSSFIREX INTRODUCTION CrossFireX (also known as ATI CrossFire) is a brand name for ATI Technologies' multi-GPU solution. The technology enables two or more discrete graphics processors to work together in a single computer to improve graphics performance. 4.2 CROSSFIREX CONFIGURATION Insert the Hybrid CrossFireX-Ready graphics card into PEX16_1, PEX16_2, or PEX16_3. Please refer to the following table to activate CFX function.
TA990FXE CHAPTER 5: RAID FUNCTIONS 5.1 OPERATING SYSTEM Supports Windows Vista and Windows 7. 5.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1. RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity. 5.
Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
TA990FXE RAID 10: RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.
Motherboard Manual RAID 5: RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself. Features and Benefits Drives: Minimum 3. Uses: RAID 5 is recommended for transaction processing and general purpose service.
TA990FXE CHAPTER 6: T-SERIES BIOS & SOFTWARE 6.1 T-SERIES BIOS T-Series UEFI BIOS Features Overclocking Navigator Engine (O.N.E.) Self Recovery System (S.R.S) Smart Fan Function BIO-Flasher: Update UEFI BIOS file from USB Flash Drive !! WARNING !! For better system performance, the UEFI BIOS firmware is being continuously updated.
Motherboard Manual NOTE Overclock is an optional process, but not a “must-do” process; it is not recommended for inexperienced users. Therefore, we will not be responsible for any hardware damage which may be caused by overclocking. We also would not guarantee any overclocking performance. B. Self Recovery System (S.R.S.) This function can’t be seen under UEFI BIOS setup, and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions.
TA990FXE CPU Smart FAN This item allows you to control the CPU Smart Fan function. CPU FAN Calibrate Press [ENTER] to calibrate CPU FAN. Control Mode This item provides several operation modes of the fan. Fan Ctrl OFF(℃) When CPU temperature is lower than this value, the CPU fan will keep lowest RPM. The range is from 0~127, with an interval of 1. Fan Ctrl On(℃) When CPU temperature is higher than this value, the CPU fan controller will turn on. The range is from 0~127, with an interval of 1.
Motherboard Manual 6.2 T-SERIES SOFTWARE Installing T-Series Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Auto-run function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation. Launching T-Series Software After the installation process is completed, you will see the software icon showing on the desktop.
TA990FXE The CPU tab provides information on the CPU and motherboard. The Memory tab provides information on the memory module(s). You can select memory module on a specific slot to see its information. The OC Tweaker tab allows you to change system clock settings and voltages settings.
Motherboard Manual Six Pre-set Modes: V3, V6, V9, V12, V15, AUTO for different overclocking experience. The HW Monitor tab allows you to monitor hardware voltage, fan speed, and temperature. Besides, you also can set related values for CPU Smart Fan.
TA990FXE Pressing TOVERCLOCKER logo will display information about manufacturer and software version. You can update currnet version by clicking the button “Live Update.” Green Power II Utility BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances energy efficiency by disabling extra phases while CPU is on light loading; it features 4+1 power phases, current power saving, and toal power saving.
Motherboard Manual G.P.U Mode Setting This utility provides five modes, upon your requirements, to improve system performance or to save power consumption. Note: Even if the modes saving more power consumption are chosen, the system still can keep excellent performance. 32 Auto Phase Mode System switches the mode automatically according to current system loading condition. Performance Mode This is the mode saving power consumption most. Least energy will be used in the system.
TA990FXE eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem. Before you use this utility, please set Outlook Express as your default e-mail client application program. represent s import ant *information that you must provide.
Motherboard Manual Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail. We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.
TA990FXE BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information AMI BIOS Online Update function Clear CMOS function (Only for AMI BIOS) (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file Once click on this button, the saving dialog will show. Choose the position to save file and enter file name.
Motherboard Manual Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.
TA990FXE (for AMI BIOS only) Automatically download and update the latest BIOS via internet; make sure that the computer is connected to the internet before using this function. After clicking on the Onlinr Update button, the utility will search for the latest BIOS from internet. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed. If there is no other newer BIOS version, the utility will also tell you that your BIOS has been the latest version.
Motherboard Manual CHAPTER 7: USEFUL HELP 7.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
TA990FXE 7.2 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed.
Motherboard Manual 7.3 AMI BIOS BEEP CODE Boot Block Beep Codes Number of Beeps 1 2 3 4 5 7 10 11 12 13 Description No media present. (Insert diskette in floppy drive A:) “AMIBOOT.ROM” file not found in root directory of diskette in A: Insert next diskette if multiple diskettes are used for recovery Flash Programming successful File read error No Flash EPROM detected Flash Erase error Flash Program error “AMIBOOT.
TA990FXE 7.4 AMI BIOS POST CODE Checkpoint 03 04 05 06 07 08 C0 C1 C2 C5 C6 C7 0A 0B 0C 0E 13 20 24 2A 2C 2E 31 33 Description Disable NMI, Parity, video for EGA, and DMA controllers. Initialize BIOS, POST, Runtime data area. Also initialize BIOS modules on POST entry and GPNV area. Initialized CMOS as mentioned in the Kernel Variable "wCMOSFlags." Check CMOS diagnostic byte to determine if battery power is OK and CMOS checksum is OK. Verify CMOS checksum manually by reading storage area.
Motherboard Manual Checkpoint 37 38 39 3A 3B 3C 40 52 60 75 78 7C 84 85 87 8C 8D 8E 90 A1 A2 A4 A7 A9 AA AB AC B1 00 42 Description Displaying sign-on message, CPU information, setup key message, and any OEM specific information. Initializes different devices through DIM. See DIM Code Checkpoints section of document for more information. USB controllers are initialized at this point. Initializes DMAC-1 & DMAC-2. Initialize RTC date/time. Test for total memory installed in the system.
TA990FXE 7.
Motherboard Manual 7.6 TROUBLESHOOTING Probable 1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. System does not boot from a hard disk drive, but can be booted from optical drive. Solution 1. 2. 3. Make sure power cable is securely plugged in. Replace cable. Contact technical support.
TA990FXE This page is intentionally left blank.
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES GERMAN Spezifikationen Sockel AM3+ CPU Die AMD 64-Architektur unterstützt eine 32-Bit- und AMD Sempron / Phenom II / Athlon II / FX 64-Bit-Datenverarbeitung Prozessoren FSB Chipsatz Unterstützt Hyper Transport 3.0 Unterstützt HyperTransport 3.0 mit einer Bandbreite von bis zu 5.2 GT/s AMD 990FX AMD SB950 ITE 8728 Super E/A Umgebungskontrolle, Bietet die häufig verwendeten alten Super Hardware-Überwachung E/A-Funktionen.
TA990FXE Spezifikationen Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion S/PDIF Ausgangsanschluss x1 Unterstützt die digitale Audioausgabefunktion Verbraucher-IR Anschluss x1 CPU-Lüfter-Sockel x1 System-Lüfter-Sockel x2 "CMOS löschen"-Sockel x1 USB2.0-Anschluss x2 CPU-Lüfterstromversorgungsanschluss (mit Smart Fan-Funktion) System-Lüfter-Stromversorgungsanschluss Jeder Anschluss unterstützt 2 Fronttafel-USB2.0-Anschlüsse USB3.
Motherboard Manual FRENCH SPEC Socket AM3+ UC Processeurs AMD Sempron / Phenom II / Athlon II / FX Bus frontal L'architecture AMD 64 permet le calcul 32 et 64 bits Prend en charge Hyper Transport 3.0 Prend en charge Hyper Transport 3.0 jusqu'à une bande passante de 5.2 GT/s Chipset AMD 990FX AMD SB950 Super E/S ITE 8728 Initiatives de contrôle environnementales, Fournit la fonctionnalité de Super E/S Moniteur de matériel patrimoniales la plus utilisée.
TA990FXE SPEC Connecteur de sortie S/PDIF x1 Prend en charge la fonction de sortie audio numérique Connecteur de IR du consommateur x1 Embase de ventilateur UC x1 Embase de ventilateur système x2 Embase d'effacement CMOS x1 Connecteur USB2.0 x2 Connecteur USB3.
Motherboard Manual ITALIAN SPECIFICA L’architettura AMD 64 abilita la co mputazione 32 Socket AM3+ CPU Processori AMD Sempron / Phenom II / e 64 bit Athlon II / FX FSB Chipset Supporto di Hyper Transport 3.0 Supporto di HyperTransport 3.0 fino a 5.2 GT/s di larghezza di banda AMD 990FX AMD SB950 ITE 8728 Super I/O Funzioni di controllo dell’ambiente: Fornisce le funzionalità legacy Super Monitoraggio hardware I/O usate più comunemente.
TA990FXE SPECIFICA Collettore ventolina CPU x1 Collettore ventolina sistema x2 Collettore cancellaz ione CMOS x1 Connettore USB2.0 x2 Connettore USB3.0 x1 Connettore IEEE 1394 x1 Porta seriale x1 Connettore alimentazione x1 Alimentazione ventolina CPU (con funzione Smart Fan) Alimentazione ventolina di sistema Ciascun connettore supporta 2 porte USB2.0 pannello frontale Ciascun connettore supporta 2 porte USB3.
Motherboard Manual SPANISH Especificación Conector AM3+ CPU La arquitectura AMD 64 permite el procesado de 32 y Procesadores AMD Sempron / Phenom II / 64 bits Athlon II / FX FSB Soporta las tecnologías Hyper Transport 3.0 Admite HyperTransport 3.0 con un ancho de banda de hasta 5.2 GT/s Conjunto de AMD 990FX chips AMD SB950 ITE 8728 Súper E/S Iniciativas de control de entorno, Le ofrece las funcionalidades heredadas de Monitor hardware uso más común Súper E/S.
TA990FXE Especificación Conector de IR del consumidor X1 Cabecera de ventilador de CPU X1 Fuente de alimentación de ventilador de CPU (con función Smart Fan) Cabecera de ventilador de sistema X2 Fuente de alimentación de ventilador de sistema Cabecera de borrado de CMOS X1 Conector USB2.0 X2 Cada conector soporta 2 puertos USB2.0 frontales Conector USB3.0 X1 Cada conector soporta 2 puertos USB3.
Motherboard Manual PORTUGUESE ESPECIFICAÇÕES A arquitectura AMD 64 permite uma computação de 32 Socket AM3+ CPU Processadores AMD Sempron / Phenom II e 64 bits / Athlon II / FX FSB Chipset Suporta as tecnologias Hyper Transport 3.0 Suporta a tecnologia HyperTransport 3.0 com uma largura de banda até 5.2 GT/s AMD 990FX AMD SB950 ITE 8728 Especificaçã o Super I/O Iniciativas para controlo do ambiente Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O.
TA990FXE ESPECIFICAÇÕES Conector de saída S/PDIF x1 Conector de IR do consumidor x1 Conector da ventoinha da CPU x1 Conector da ventoinha do sistema x2 Conector para limpeza do CMOS x1 Conector USB2.0 x2 Conector USB3.0 x1 Conector IEEE 1394 x1 Porta série x1 Conector de alimentação x1 Suporta a saída de áudio digital Alimentação da ventoinha da CPU (com a função Smart Fan) Alimentação da ventoinha do sistema Cada conector suporta 2 portas USB2.
Motherboard Manual POLISH SPEC Socket AM3+ Procesor Architektura AMD 64 umożliwia przetwarzanie 32 i 64 AMD Sempron / Phenom II / Athlon II / FX bitowe Procesory FSB Obsługa Hyper Transport 3.0 Obsługa HyperTransport 3.0 o szerokości pasma do 5.2 GT/s Chipset AMD 990FX AMD SB950 Gniazda DDR3 DIMM x 4 Moduł pamięci DDR3 z trybem podwójnego kanału Pamięć Maks.
TA990FXE SPEC Złącze Konsument IR x1 Złącze główkowe wentylatora procesora x1 Złącze główkowe wentylatora systemowego x2 Zasilanie wentylatora procesora (z funkcją Smart Fan) Zasilanie wentylatora systemowego Złącze główkowe kasowania CMOS x1 Złącze USB2.0 x2 Złącze USB3.
Motherboard Manual RUSSIAN СПЕЦ CPU (центральн ый процессор) FSB Набор Гнездо AM3+ Архитектура AMD 64 разрешать обработка Процессоры AMD Sempron / Phenom II / данных на 32 и 64 бит Athlon II / FX Поддержка Hyper Transport 3.0 Поддержка HyperTransport 3.0 с пропускной способностью до 5.
TA990FXE СПЕЦ Источник питания для вентилятора центрального Контактирующее приспособление вентилятора центрального процессора x1 Контактирующее приспособление вентилятора системы x2 процессора (с функцией интеллектуального вентилятора) Источник питания для вентилятора системы Открытое контактирующее приспособление CMOS x1 USB2.0-разъём x2 USB3.
Motherboard Manual ARABIC اﻟﻤﻮاﺻﻔﺎت AM3+ﻡﻘﺒﺲ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ AMD Sempron / Phenom II / Athlon IIﻡﻌﺎﻟﺠﺎت / FX اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ GT/s AMD 990FX AMD SB950 ﻡﺰدوﺝﺔ اﻟﻘﻨﺎةDDR3وﺣﺪة ذاآﺮة ﻋﺪد4 ﺳﻌﺎت DDR3 1866/1600/1333/1066/800ﺗﺪﻋﻢ اﻟﺬاآﺮة ﻡﻦ ﻥﻮع ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى 32ﺝﻴﺠﺎ ﺏﺎﻳﺖ ﻡﻴﺠﺎ /512ﺳﻌﺔ DDR3ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع DIMMﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﺏﺎﻳﺖ و /1و /2و /4و 8ﺝﻴﺠﺎ ﺏﺎﻳﺖ ﻡﻴﺠﺎ ﺏﺎﻳﺖ ) 2000 (OCﺳ ﻌﺎت DDR3ﻧ ﻮع ﻣﻦ اﻟﺬا
TA990FXE اﻟﻤﻮاﺻﻔﺎت ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ ﺥﺮج S/PDIF ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ ﻡﻨﻔﺬ اﻷﺣﻤﺮ ﺗﺤ ﺖ ﻡﺴ ﺘﻬﻠﻜﺔ ﻋﺪد 1 وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ ﻋﺪد 1 Smart Fanﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ ﻡﻊ وﻇﻴﻔﺔ وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم ﻋﺪ2 ﻟﺘﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ ﻟﻤﺮوﺣﺔ اﻟﻨﻈﺎم وﺹﻠﺔ ﻡﺴﺢ CMOS ﻋﺪد 1 ﻡﻨﻔﺬ USB2.0 ﻋﺪد 2 ﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ ﻓﺘﺤﺘﻲ USB2.0ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ USB3.
Motherboard Manual JAPANESE 仕様 Socket AM3+ CPU AMD 64アーキテクチャでは、32ビットと64ビット計算が AMD Sempron / Phenom II / Athlon II / FX プ 可能です ロセッサ FSB ハイパートランスポート3.0サポートします 5.2 GT/sのバンド幅までハイパートランスポート 3.
TA990FXE 仕様 CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載) システムファンヘッダ x2 システムファン電源装置 CMOSクリアヘッダ x1 USB2.0コネクタ x2 各コネクタは2つのフロントパネルUSB2.0ポートをサポ ートします USB3.0コネクタ x1 各コネクタは2つのフロントパネルUSB3.0ポートをサポ ートします IEEE 1394コネクタ x1 シリアルポート x1 電源コネクタ(24ピン) x1 電源コネクタ(8ピン) x1 電源コネクタ(4ピン) x1 PS/2キーボード x1 PS/2マウス x1 光学+coaxial S/PDIFアウト x1 1394ポート x1 背面パネル eSATAポート x1 I/O LANポート x1 USB2.0ポート x4 USB3.0ポート x2 USB3.0デバイス (で Asmedia ASM1042) USB2.0/USB1.