P35D2-A7 Setup Manual FCC Information and Copyright This equipment has been tes ted and found to comply with the limits of a Class B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed to provide reasonable protec tion against harmful interference in a residential installation.
Table of Contents Chapter 1: Introduction ............................................. 1 1.1 1.2 1.3 1.4 1.5 1.6 Before You Start.......................................................................... 1 Package Checklist....................................................................... 1 Motherboard Features................................................................. 2 Rear Panel Connectors (for Ver 5.x).............................................. 4 Rear Panel Connectors (for Ver 6.x ).....
P35D2-A 7 CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU ST ART Thank you for choosing our product. Be fore you start installing the mothe rboard, please make sure you follow the instructions be low: Prepare a dry and stable work ing environment with sufficie nt lighting. Always disconne ct the compute r from powe r outle t be fore ope ration.
Motherboard Manual 1.3 MOT HERBOARD FEAT URES Ver 5.x CPU FSB Chipset Ver 6.
P35D2-A 7 Ver 5.x Ver 6.x Realtek RTL 8111B / 8101E (optional) LAN Sound Codec 10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit 10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit bandwidth is for RTL 8111B only) bandwidth is for RTL 8111B only) Half / Full duplex capability Half / Full duplex capability ALC888 ALC662 7.1 channels audio out 5.
Motherboard Manual 1.4 REAR PANEL CONNECT ORS ( FOR V ER 5.X) PS/ 2 Mouse PS/2 Keyboard LAN USBX2 USBX2 Cent er 1.5 Audio Jack USBX2 Line I n Rear Line O ut Si de Mi c I n REAR PANEL CONNECT ORS ( FOR V ER 6.X) PS/ 2 Mouse LAN Li ne In/ Surround Line Out Mic In 1/ Bass/ Center PS/2 Keyboard USBX2 USBX2 USBX2 Since the audio c hip s upports High Definiti on Audio Specific ation, the func tion of eac h audi o jack c an be defined by software.
P35D2-A 7 1.6 MOT HERBOARD LAYOUT JCFAN1 JKBMS1 LGA775 JATXPWR1 CPU1 JRJ45USB1 DDR2_B2 DDR2_B1 JUSB1 DDR2_A2 DDR2_A1 JUSB2 JATXPWR2 Intel P35 JAUDIO1 (for Ver5.x) JAUDIO 2 (for Ver 6.x) JNFAN1(Optional) JSPDIF_OUT1(Opti onal) JCDIN1 PEX16_1 LAN PEX1_1 JCMOS1 PEX4_1 Super I/O BAT1 Intel ICH9 PCI1 BI OS SATA3 SATA1 IDE PCI2 CODEC SATA4 SATA2 IDE1 PCI3 JAUDIOF1 JCOM1 J USB3 JPRNT1 JUSB4 JPANEL1 FDD1 JSFAN1 JUSB 5 st Not e: ■ represe nts the 1 pin.
Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Pin Cap Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle.
P35D2-A 7 Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1: Step 2-2: Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1. This completes the installation.
Motherboard Manual 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
P35D2-A 7 2.3 INST ALLING SYST EM MEMORY DDR2_B1 DDR2_B2 DDR2_A1 DDR2_A2 A. Memory Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. B.
Motherboard Manual C. Dual Channel Memory installation To trigger the Dual Channel f unction of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pairs, shown in the f ollowing table. Dual Channel Status DDR2_A1 DDR2_A2 DDR2_B1 DDR2_B2 Enabled O X O X Enabled X O X O Enabled O O O O (O means memory installed, X means memory not installed.) The DRAM bus width of the memory module must be the same (x8 or x16) D.
P35D2-A 7 2.4 CONNECT ORS AND SLOT S FDD1: Floppy Disk Conne ctor The motherboard prov ides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the prov ided f loppy drive ribbon cables. 2 34 1 33 IDE1: Hard Disk Conne ctor The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.
Motherboard Manual PEX16_1: PCI-Express x16 Slot - PCI-Express 1.0a compliant. - Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, f or an aggregate of 8GB/s totally. PEX4_1: PCI-Expre ss x4 Slot - PCI-Express 1.0a compliant. - Maximum theoretical realized bandwidth of 1GB/s simultaneously per direction, f or an aggregate of 2GB/s totally. PEX1_1: PCI-Expre ss x1 Slot - PCI-Express 1.0a compliant.
P35D2-A 7 CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW T O SET UP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DET AIL SETT INGS JPANEL1: Front Panel Heade r This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button and speaker connection. It allows user to connect the PC case’s f ront panel switch functions.
Motherboard Manual JATXPWR2: ATX Powe r Source Conne ctor JATXPW2 allows user to connect 24-pin power connector on the ATX power supply. 13 1 24 12 Pin Assignment Pin Assignment 13 14 15 16 17 18 19 20 21 22 23 24 +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 1 2 3 4 5 6 7 8 9 10 11 12 +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
P35D2-A 7 JUSB3/JUSB4/JUSB5: He ade rs for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC f ront panel, and also can be connected with internal USB devices, like USB card reader. JUSB3 JUSB5 JUSB4 Pin 1 2 3 4 5 6 7 8 9 10 1 2 9 10 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC JAUDIO F1: Front Panel Audio Heade r This header allows user to connect the front audio output cable with the PC f ront panel.
Motherboard Manual JCMO S1: Cle ar CMOS Heade r By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting and the CMOS data, please carefully f ollow the procedures to avoid damaging the motherboard. 3 1 Pin 1-2 Close: Normal Operation (default). 3 3 1 1 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Proce dures: 1. 2. 3. 4. 5. 6. Remov e AC power line. Set the jumper to “Pin 2-3 close”. Wait f or f ive seconds. Set the jumper to “Pin 1-2 close”. Power on the AC.
P35D2-A 7 JSPDIF_O UT1: Digital Audio-out Conne ctor (O ptional) This connector allows user to connect the PCI bracket SPDIF output header. 3 Pin Assignment 1 2 3 +5V SPDIF_OUT Ground 1 JCO M1: Se rial Port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port.
Motherboard Manual JPRNT1: Printe r Port Connector This header allows you to connector printer on the PC.
P35D2-A 7 CHAPTER 4: USEFUL HELP 4.1 DRIVER INST ALLAT ION NOT E After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you ins ert the Driver CD, please use file brows er to locate and execute the file SETUP.
Motherboard Manual 4.2 AWARD BIOS BEEP CODE Beep Sound One long beep followed by two short beeps High-low siren sound Meaning Video card not found or v ideo card memory bad CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps every other second 4.
P35D2-A 7 4.4 TROUBLESHOOT ING Probable Solution 1. Make sure power cable is No power to the system at all securely plugged in. Power light don’t illuminate, f an inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on key board does not turn on. System inoperativ e. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning. module snaps into place. 1.
Motherboard Manual CHAPTER 5: WARPSPEEDER™ III 5.1 INT RODUCT ION [WarpSpeeder™ III], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage.
P35D2-A 7 5.3 INST ALLAT ION 1. Execute the setup execution file, and then the following dialog will pop up. Please click “Next” button and follow the default procedure to install. 2. When you see the following dialog in setup procedure, it means setup is completed. Click “Finish” button. Usage : The following figures are only for reference, the screen printed in this user manual will change according to your motherboard on hand.
Motherboard Manual 5.4 WARPSPEEDER™ III 1. Desktop Icon After the [WarpSpeeder™ III] has been installed, a [WarpSpeeder™ III] icon will appear on the desktop, just like the icon shown below. Now you can launch the [WarpSpeeder™ III] utility simply by double-clicking the desktop icon. 2. Main Panel If you double-click the desktop icon, [WarpSpeeder™ III] will be launched. Please refer to the following figure; the utility’s first window you will see is Main Panel.
P35D2-A 7 3. Overclock/Overvoltage Panel Click the Overclock/Overvoltage button in the Main Panel, the button will be highlighted and the Overclock/Overvoltage Panel will show up as the following figure. As you can see, the Overclock Panel is on the right side, and the Overvoltage Panel is on the left side.
Motherboard Manual O ve rclock Panel contains these fe atures: a. “Auto-Overclock”: User can click this button and [WarpSpeeder™ III] will set the best and stable performance and frequency automatically. A warning dialog as below will show up to notify you that the system may become unstable, click on “OK” to proceed. Then [WarpSpeeder™ III] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function.
P35D2-A 7 O ve rvoltage Panel contains these fe ature s: a. b. “CPU Voltage”: This function allows user to adjust CPU voltage. increase or “-“ to decrease the CPU voltage. Click on “+” to “Memory Voltage”: This function allows user to adjust Memory voltage. to increase or “-“ to decrease the Memory voltage. Click on “+” 4. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will show up as the following figure.
Motherboard Manual 5. About Panel Click the “about” button in Main Panel, the button will be highlighted and the About Panel will show up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the the version number of [WarpSpeeder™ III] utility.
P35D2-A 7 This page is intentionally left blank.
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN Ver 5.x Ver 6.
P35D2-A 7 Ver 5.x LAN HD Ver 6.x Realtek RTL 8111B / RTL 8101E(optional) Realtek RTL 8111B / RTL 8101E(optional) 10 / 100 / 1000 Mb/s Auto-Negotiation 10 / 100 / 1000 Mb/s Auto-Negotiation (Gigabit-Bandbreite nur beim RTL 8111B) (Gigabit-Bandbreite nur beim RTL 8111B) Halb-/ Vollduplex-Funktion Halb-/ Vollduplex-Funktion ALC888 ALC662 Unterstützt High-Definition Audio Audio-Unters Unterstützt High-Definition Audio tützung Steckplätze Onboard-Ans chluss Rückseiten-E /A 5.
Motherboard Manual FRANCE Ver 5.x Ver 6.
P35D2-A 7 Ver 5.x Ver 6.
Motherboard Manual IT ALIAN Ver 5.x CPU Ver 6.
P35D2-A 7 Ver 5.x LAN Supporto audio HD Alloggi Connettori su scheda Ver 6.
Motherboard Manual SPANISH Ver 5.x Ver 6.
P35D2-A 7 Ver 5.x Ver 6.
Motherboard Manual PORT UGUESE Ver 5.x Ver 6.
P35D2-A 7 Ver 5.x LAN Suporte para áudio de alta definição Ranhuras Conectores na placa Ver 6.
Motherboard Manual POLISH Ver 5.x Ver 6.
P35D2-A 7 Ver 5.x Ver 6.x szybkości (Pasmo gigabitowe wyłącznie dla RTL szybkości (Pasmo gigabitowe wyłącznie dla RTL Obsługa audio HD Gniazda Złącza wbudowane 8111B) 8111B) Działanie w trybie połowicznego / pełnego Działanie w trybie połowicznego / pełnego dupleksu dupleksu ALC888 ALC662 Obsługa High-Definition Audio Obsługa High-Definition Audio 5.1 kanałowe wyjście audio 7.
Motherboard Manual RUSSIAN Ver 5.x CPU LGA 775 Процессор Intel Core2Duo / Core2Quad / Процессор Intel Core2Duo / Core2Quad / Celeron 4xx / Pentium 4 / Pentium D / Celeron D Celeron 4xx / Pentium 4 / Pentium D / Celeron D (центральн Поддержка технологий Hyper-Threading / ый Ver 6.
P35D2-A 7 Ver 5.x Ver 6.
Motherboard Manual ARABIC Ver 6.x Ver 5.
P35D2-A 7 Ver 6.x Ver 5.
Motherboard Manual JAPANESE Ver 5.x CPU Ver 6.
P35D2-A 7 Ver 5.x LAN HDオーディ オのサポート Realtek RTL 8111B / RTL 8101E(オプション) 10 / 100 / 1000 Mb/秒のオートネゴシエーション 10 / 100 / 1000 Mb/秒のオートネゴシエーション (Gigabitバンド幅はRTL 8111B専用です) (Gigabitバンド幅はRTL 8111B専用です) 半/全二重機能 半/全二重機能 ALC888 ALC662 ハイデフィニションオーディオのサポート ハイデフィニションオーディオのサポート 7.1 チャンネルオーディオアウト 5.1 チャンネルオーディオアウト PCIスロット スロット オンボードコ ネクタ 背面パネル I/O Ver 6.
P35D2-A7 BIOS Setup BIOS Setup ................................................................................................ 1 1 Main Menu ............................................................................................. 3 2 Standard CMOS Features..................................................................... 7 3 Advanced BIOS Features ...................................................................... 9 4 Advanced Chipset Features....................................................
P35D2-A7 BIOS Setup Introduction The purpose of this manual is to describe the settings in the Phoenix-Award™ BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to CMOS RAM. The power of CMOS RAM is supplied by a battery so that it retains the Setup information when the power is turned off. Basic Input-Output System (BIOS) determines what a computer can do without accessing programs from a disk.
P35D2-A7 ACPI Support Phoenix-Award ACPI BIOS support Version 1.0b of Advanced Configuration and Power interface specification (ACPI). It provides ASL code for power management and device configuration capabilities as defined in the ACPI specification, developed by Microsoft, Intel and Toshiba. PCI Bus Support This PHOENIX-AWARD BIOS also supports Version 2.3 of the Intel PCI (Peripheral Component Interconnect) local bus specification.
P35D2-A7 1 Main Menu Once you enter Phoenix-Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions. Use the arrow keys to select among the items and press to accept and enter the sub-menu. !! WARNING !! For better system performance, the BIOS firmware is being continuously updated. The BIOS information described in this manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9,10) is for your reference only.
P35D2-A7 Advanced BIOS Features This submenu allows you to configure advanced features of the BIOS. Advanced Chipset Features This submenu allows you to configure special chipset features. Integrated Peripherals This submenu allows you to configure certain IDE hard drive options and Programmed Input/ Output features. Power Management Setup This submenu allows you to configure the power management features.
P35D2-A7 Set Supervisor Password Setting the supervisor password will prohibit everyone except the supervisor from making changes using the CMOS Setup Utility. You will be prompted with to enter a password. Set User Password If the Supervisor Password is not set, then the User Password will function in the same way as the Supervisor Password. If the Supervisor Password is set and the User Password is set, the “User” will only be able to view configurations but will not be able to change them.
P35D2-A7 Upgrade BIOS This submenu allows you to upgrade bios.
P35D2-A7 2 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into several categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. Figure 2: Standard CMOS Setup Main Menu Selections This table shows the items and the available options on the Main Menu. Item Options Description Date mm : dd : yy Set the system date.
P35D2-A7 Item Options Description IDE Channel 1 Options are in its sub menu. Press to enter the sub menu of detailed options. Master / Slave 360K, 5.25 in 1.2M, 5.25 in Drive A 720K, 3.5 in 1.44M, 3.5 in Select the type of floppy disk drive installed in your system. 2.88M, 3.5 in None All Errors No Errors Halt On All, but Keyboard All, but Diskette Select the situation in which you want the BIOS to stop the POST process and notify you.
P35D2-A7 3 Advanced BIOS Features Figure 3: Advanced BIOS Setup CPU Feature 9
P35D2-A7 Delay Prior to Thermal Set this item to enable the CPU Thermal function to engage after the specified time. The Choices: 4 Min, 8 Min, 16Min (default), 32 Min. Thermal Management This option allows you to select the way to control the “Thermal Management.” The Choices: Thermal Monitor 1 (default), Thermal Monitor 2. TM2 Bus Ratio This option represents the frequency (bus ratio) of the throttled performance state that will be initiated when the on-die sensor detects temperature increase.
P35D2-A7 Cache Setup CPU L3 Cache Depending on the CPU/chipset in use, you may be able to increase memory access time with this option. Enabled (default) Enable cache. Disabled Disable cache. Boot Seq & Floppy Setup This item allows you to setup boot sequence & Floppy.
P35D2-A7 Hard Disk Boot Priority The BIOS will attempt to arrange the Hard Disk boot sequence automatically. You can change the Hard Disk booting sequence here. The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB HDD0, USB HDD1, USB HDD2, and Bootable Add-in Cards. First/Second/Third Boot Device The BIOS will attempt to load the operating system in this order. The Choices: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, Legacy LAN, Disabled.
P35D2-A7 Virus Warning This option allows you to choose the VIRUS Warning feature that is used to protect the IDE Hard Disk boot sector. If this function is enabled and an attempt is made to write to the boot sector, BIOS will display a warning message on the screen and sound an alarm beep. Disabled (default) Virus protection is disabled. Enabled Virus protection is activated. Hyper-Threading Technology This option allows you to enable or disabled Hyper-Threading Technology.
P35D2-A7 Typematic Rate (Chars/Sec) Sets the rate at which a keystroke is repeated when you hold the key down. The Choices: 6 (default), 8, 10, 12, 15, 20, 24, 30. Typematic Delay (Msec) Sets the delay time after the key is held down before it begins to repeat the keystroke. The Choices: 250 (default), 500, 750, 1000. Security Option This option will enable only individuals with passwords to bring the system online and/or to use the CMOS Setup Utility.
P35D2-A7 Small Logo(EPA) Show This item allows you to select whether the “Small Logo” shows. The Choices: Disabled (default), Enabled. Summary Screen Show This item allows you to enable/disable the summary screen. Summary screen means system configuration and PCI device listing. The Choices: Disabled (default), Enabled.
P35D2-A7 4 Advanced Chipset Features This submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory resources, such as DRAM. It also coordinates communications with the PCI bus. The default settings that came with your system have been optimized and therefore should not be changed unless you are suspicious that the settings have been changed incorrectly.
P35D2-A7 Memory Hole At 15M-16M You can reserve this area of system memory for ISA adapter ROM. When this area is reserved it cannot be cached. Check the user information of peripherals that need to use this area of system memory for the memory requirements. The Choices: Disabled (default), Enabled. PEG Force X1 When using on-chip VGA, this item has to be set as X1.
P35D2-A7 5 Integrated Peripherals Figure 5.
P35D2-A7 IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sectors read / write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read / write per sector where the drive can support. The Choices: Enabled (default), Disabled.
P35D2-A7 Super IO Device Press Enter to configure the Super I/O Device. Onboard FDC Controller Select enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you installed another FDC or the system uses no floppy drive, select disabled in this field. The Choices: Enabled (default), Disabled. Onboard Serial Port 1 Select an address and corresponding interrupt for the first and second serial ports.
P35D2-A7 Parallel Port Mode This item allows you to determine how the parallel port should function. The default value is SPP. The Choices: SPP (default) Using Parallel port as Standard Printer Port. EPP Using Parallel Port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP & EPP mode. ECP Mode Use DMA Select a DMA Channel for the port. The Choices: 3 (default), 1.
P35D2-A7 USB Operation Mode Auto decide USB device operation mode. [High Speed]: If USB device was high speed device,then it operated on high speed mode. If USB device was full/low speed,then it operated on full/low speed mode. [Full/Low Speed]: All of USB device operated on full/low speed mode. The Choices: High Speed (default), Full/Low Speed. USB Keyboard/Mouse/Storage Function This item allows you to enable or disable the USB Keyboard/ Mouse/ USB Storage Legacy Support.
P35D2-A7 6 Power Management Setup The Power Management Setup Menu allows you to configure your system to utilize energy conservation and power up/power down features. Figure 6.
P35D2-A7 ACPI Function This item displays the status of the Advanced Configuration and Power Management (ACPI). The Choices: Enabled (default), Disabled. ACPI Suspend Type The item allows you to select the suspend type under the ACPI operating system. The Choices: S1 (POS) (default) Power on Suspend S3 (STR) Suspend to RAM S1 & S3 POS+STR Run VGABIOS if S3 Resume Choosing Enabled will make BIOS run VGA BIOS to initialize the VGA card when system wakes up from S3 state.
P35D2-A7 operating system, before this function will work. POWER ON Function This item allows you to choose the power on method. The Choices: Button Only (default), Password, Hot Key, Mouse Move/Click, Mouse Double Click, Any Key, Keyboard 98. KB Power ON Password Input password and press Enter to set the Keyboard power on password. Hot Key Power ON Choose the Hot Key combination to boot up the system.
P35D2-A7 FDD, COM, LPT Port You can enable or disable FDD, COM, and LPT port under this item. The Choices: Disabled (default), Enabled. PCI PIRQ [A-D]# You can enable or disable PCI PIRQ [A-D]# under this item. The Choices: Disabled (default), Enabled. Power Management This category allows you to select the power saving method and is directly related to the following modes: 1. HDD Power Down. 2. Suspend Mode. There are three options of Power Management, three of which have fixed mode settings Min.
P35D2-A7 Video Off In Suspend This item determines the monitor status when the system is in Suspend mode. The Choices: Yes (default), No. Suspend Type Select the Suspend Type. The Choices: Stop Grant (default), PwrOn Suspend. Modem Use IRQ This determines the IRQ, which can be applied in MODEM use. The Choices: 3 (default), 4, 5, 7, 9, 10, 11, NA. Suspend Mode The item allows you to adjust the system idle time before suspend.
P35D2-A7 HPET Mode This item allows you to select the way the High Precision Event Timer works. The Choices: 32-bit mode (default), 64-bit mode.
P35D2-A7 7 PnP/PCI Configurations This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.
P35D2-A7 IRQ Resources This submenu will allow you to assign each system interrupt a type, depending on the type of device using the interrupt. When you press the “Press Enter” tag, you will be directed to a submenu that will allow you to configure the system interrupts. This is only configurable when “Resources Controlled By” is set to “Manual”.
P35D2-A7 8 PC Health Status Figure 8: PC Health Status Smart Fan Option 31
P35D2-A7 CPU Smart Fan This item allows you to control the CPU/System Fan. The Choices: Auto (default), Disabled, 4-pin, 3-pin.. Smart Fan Calibration Choose this item and then the BIOS will auto test and detect the CPU/System fan functions and show CPU/System fan speed. PWM Duty Off<℃> If the CPU/System Temperature is lower than the set value, FAN will turn off. The Choices: Min=0,.Max=127, Key in a DEC number.
P35D2-A7 Current CPU Temp This field displays the current temperature of CPU. Current CPU FAN Speed This field displays the current speed of CPU fan. Current SYS FAN Speed This field displays the current speed of SYSTEM fan.
P35D2-A7 9 Performance Booster Zone Figure 9: Performance Booster Zone CPU Clock Ratio This item allows you to select the CPU Ratio. Min= 6 Max= 50, Key in a DEC number. The Choices: 6X (default). CPU Clock This item allows you to select CPU Clock, and CPU over clocking. Min= 100 Max= 333 Key in a DEC number. The Choices: 100Mhz (default). Special Notice: If the system’s frequency that you are selected is not functioning, there are two methods of booting-up the system.
P35D2-A7 This action will boot-up the system according to FSB of the processor It’s strongly recommended to set CPU Vcore and clock in default setting. If the CPU Vcore and clock are not in default setting, it may cause CPU or M/B damage. PCIE Clock Select The Choices: Fixed 100 (default), Manual. PCIE Clock The Choices: 100 (default), Min=100; Max=200; key in DEC number. System Memory Frequency The Choices: Auto (default), 677Mhz, 800Mhz.
P35D2-A7 CAS Latency Time When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. The Choices: Auto (default), 5, 6. DRAM RAS# to CAS# Delay This field allows you to insert a timing delay between the CAS and RAS strobe signals, used when DRAM is written to, read from, or refreshed. Low value will provide a faster performance; and high value made the system more stable. This field applies only when synchronous DRAM is installed in the system.
P35D2-A7 (G)MCH Voltage This item allows you to select (G)MCH Voltage Control. The Choices: 1.25V (default), 1.35V, 1.45V, 1.55V. Memory Voltage This item allows you to select memory Voltage Control. The Choices: 1.90V (default), 2.00V, 2.10V, 2.20V, 2.30V, 2.40V, 2.50V, 2.60V.