User`s manual

TA790GX A2+/TA790GX A2+ SE/TA790GX 128M
BIOS Manual
39
Integrated Memory Test
Integrated Memory Test allows users to test memory module compatibilities without
additional device or software.
Step 1:
This item is disabled on default; change it to “ Enable” to precede memory test.
BIOS SETUP U TILITY
Main Advanced PCIPnP Boot Chipset T-Series
vxx.xx (C)Copyright 1985-200x, American Me gatrends, Inc.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+-
F1
F10
ESC
T-Series Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
=========== Automate OverClock System ===========
============ Manual OverClock System ============
OverClock Navigator [Normal]
Auto OverClock System [V6-Tech Engine]
CPU Over Voltage [StartUp]
Memory Over Voltage [1.95V]
Chipset Over Voltage [1.15V]
HT Over Voltage [1.20V]
CPU Frequency [200]
> CPU FID/VID Control
> Memory Configuration
> DRAM Timing Configuration
> Hyper Transport Configuration
Integrated Memory Test [Enabled]
Exit
Options
Enabled
Disabled
Step 2:
When the process is done, change the setting back from “Enabled” to “Disabled” to
complete the test.
BIOS SETUP U TILITY
Main Advanced PCIPnP Boot Chipset T-Series
vxx.xx (C)Copyright 1985-200x, American Me gatrends, Inc.
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
+-
F1
F10
ESC
T-Series Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
=========== Automate OverClock System ===========
============ Manual OverClock System ============
OverClock Navigator [Normal]
Auto OverClock System [V6-Tech Engine]
CPU Over Voltage [StartUp]
Memory Over Voltage [1.95V]
Chipset Over Voltage [1.15V]
HT Over Voltage [1.20V]
CPU Frequency [200]
> CPU FID/VID Control
> Memory Configuration
> DRAM Timing Configuration
> Hyper Transport Configuration
Integrated Memory Test [Disabled]
Exit
Options
Enabled
Disabled