User`s manual

ManualsBrandsBiostar ManualsPrint & ScanTA785G3 PLUS - BIOS

TA785G3/TA780G3/TA760G3 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability

or fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here without obligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Summary of content (63 pages)

PAGE 1
TA785G3/TA780G3/TA760G3 Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 2
Table of Contents Chapter 1: Introduction ............................................................ 1 1.1 Before You Start ................................................................................ 1 1.2 Package Checklist ............................................................................. 1 1.3 Motherboard Features...................................................................... 2 1.4 Rear Panel Connectors ..................................................................... 2 1.
PAGE 3
TA785G3/TA780G3/TA760G3 CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: 1.2 Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
PAGE 4
Motherboard Manual 1.3 MOTHERBOARD FEATURES TA780G3/TA760G3 CPU FSB Chipset TA785G3 Socket AM3 Socket AM3 AMD Athlon II / Phenom II processors AMD Athlon II / Phenom II processors AMD 64 Architecture enables 32 and 64 bit AMD 64 Architecture enables 32 and 64 bit computing computing Supports Hyper Transport 3.0 and Cool=n=Quiet Supports Hyper Transport 3.0 and Cool=n=Quiet (Maximum Watt: 125W) (Maximum Watt: 125W) Support HyperTransport 3.0 Support HyperTransport 3.0 Supports up to 5.
PAGE 5
TA785G3/TA780G3/TA760G3 TA780G3/TA760G3 Slots On Board Connector Back Panel I/O Board Size Special Features TA785G3 PCI Express Gen2 x16 slot x1 PCI Express Gen2 x16 slot x1 PCI slot x2 PCI slot x2 Floppy Connector x1 Floppy Connector x1 IDE Connector x1 IDE Connector x1 SATA Connector x4 SATA Connector x4 Front Panel Connector x1 Front Panel Connector x1 Front Audio Connector x1 Front Audio Connector x1 S/PDIF Out Connector x1 S/PDIF Out Connector x1 CPU Fan Header x1
PAGE 6
Motherboard Manual 1.5 MOTHERBOARD LAYOUT KBMS1 CPU_FAN1 ATXPWR2 ATXPWR1 V GA 1 D IM M A 1 AM 3 D IM M B 1 S oc k e t D VI1 IDE 1 USB1 JUSBV1 BAT1 RJ45USB1 AMD 780G/ 760G/ 785G JSPDIFOUT1 AUDIO1 SATA4 LAN SATA3 SYS_FAN2 PEX16_1 BIOS Super I/O JCMOS1 PCI1 SATA2 PCI2 Codec J_COM1 F_AUDIO1 FDD1 JUSBV2 F_USB1 Note: ■ represents the 1st pin.
PAGE 7
TA785G3/TA780G3/TA760G3 CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 2: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
PAGE 8
Motherboard Manual Step 3: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to CPU_FAN1 to complete the installation.
PAGE 9
TA785G3/TA780G3/TA760G3 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
PAGE 10
Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY 8 D IM M B 1 D IM M A 1 A. DDR3 Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
PAGE 11
TA785G3/TA780G3/TA760G3 B. Memory Capacity DIMM Socket Location DDR3 Module DIMMA1 512MB/1GB/2GB/4GB DIMMB1 512MB/1GB/2GB/4GB Total Memory Size Max is 8GB. C. Dual Channel Memory installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table. Dual Channel Status DIMMA1 Disabled O X Disabled X O Enabled O O DIMMB1 (O means memory installed, X means memory not installed.
PAGE 12
Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. 2 34 1 33 IDE1: IDE/ATAPI Connector The motherboard has a 32-bit Enhanced IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
PAGE 13
TA785G3/TA780G3/TA760G3 ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 12 24 1 13 Pin 1 2 3 4 5 6 7 8 9 10 11 12 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V ATXPWR2: ATX Power Source Connector Connecting this connector will provide +12V to CPU power circuit.
PAGE 14
Motherboard Manual PEX16_1: PCI-Express Gen2 x16 Slot - PCI-Express 2.0 compliant. Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally. PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins. 2X bandwidth over the PCI-Express 1.1 architecture. PE X1 6_ 1 PCI1/PCI2: Peripheral Component Interconnect Slots This motherboard is equipped with 2 standard PCI slots.
PAGE 15
TA785G3/TA780G3/TA760G3 CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS PANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case’s front panel switch functions.
PAGE 16
Motherboard Manual JCMOS1: Clear CMOS Header Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. 1 3 Pin 1-2 Close: Normal Operation (default). 1 3 1 3 Pin 2-3 Close: Clear CMOS data. ※ Clear CMOS Procedures: 1. 2. 3. 4. 5. 6. Remove AC power line. Set the jumper to “Pin 2-3 close”. Wait for five seconds. Set the jumper to “Pin 1-2 close”. Power on the AC.
PAGE 17
TA785G3/TA780G3/TA760G3 JUSBV1/JUSBV2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBV1: +5V for USB ports at USB1/RJ45USB1. JUSBV2: +5V for USB ports at F_USB1/F_USB2. Pin 2-3 Close: JUSBV1: +5V STB for USB ports at USB1/RJ45USB1. JUSBV2: +5V STB for USB ports at F_USB1/F_USB2. 1 3 Pin 1-2 close JUSBV1 3 1 1 1 3 Pin 2-3 close 3 JU SBV2 F_AUDIO1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel.
PAGE 18
Motherboard Manual JSPDIFOUT1: Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF output header. Pin 1 2 3 3 Assignment +5V SPDIF_OUT Ground 1 J_COM1: Serial Port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port.
PAGE 19
TA785G3/TA780G3/TA760G3 On-Board LED Indicators There are 6 LED indicators showing system status. PH1 PH2 PH3 LED1 LED2 LED1 & LED2: Debug Indicators PH1 ~ PH4: Power Status Indicators Please refer to the tables below for specific messages: LED1 ON ON OFF OFF LED2 ON OFF ON OFF PH1~PH3 ON OFF Message Normal Memory Error VGA Error Abnormal: CPU / Chipset error. Phase Indicator Phase Active Phase Disable On-Board Buttons There are 2 on-board buttons. SW_PWR1 SW_RST1 SW_RST1: Reset button.
PAGE 20
Motherboard Manual CHAPTER 4: HYBRID CROSSFIREX FUNCTION 4.1 HYBRID CROSSFIREX REQUIREMENTS Only Windows Vista supports Hybrid CrossFireX function. A graphics card with Radeon HD3450/HD3470 GPU. The graphics card driver should support Hybrid CrossFireX technology. The power supply unit must provide at least the minimum power required by the system, or the system will be unstable. A power supply above 450W is recommended under Hybrid CrossFireX mode. 4.
PAGE 21
TA785G3/TA780G3/TA760G3 CHAPTER 5: RAID FUNCTIONS 5.1 OPERATING SYSTEM Supports Windows XP and Windows VISTA. 5.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. RAID 1+0: RAID 1+0 combines the techniques used in RAID 0 and RAID 1. RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity. 5.
PAGE 22
Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
PAGE 23
TA785G3/TA780G3/TA760G3 RAID 1+0: RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0 solution for improved resiliency, performance and rebuild performance. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.
PAGE 24
Motherboard Manual CHAPTER 6: T-SERIES BIOS & SOFTWARE 6.1 T-SERIES BIOS T-Series BIOS Features Overclocking Navigator Engine (O.N.E.) Memory Integration Test (M.I.T., under Overclock Navigator Engine) BIO-Flasher: Update BIOS file from USB Flash Drive or FDD Self Recovery System (S.R.S) Smart Fan Function CMOS Reloading Program !! WARNING !! For better system performance, the BIOS firmware is being continuously updated.
PAGE 25
TA785G3/TA780G3/TA760G3 Manual Overclock System (M.O.S.) MOS is designed for experienced overclock users. It allows users to customize personal overclock settings. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series T-Series Settings Exit Options WARNING: Please Clear CMOS if system no display after overclocking.
PAGE 26
Motherboard Manual Clock Control Enter this function for more clock settings. Voltage Configuration Enter this function for more advanced voltage settings. DRAM Timing Configuration Enter this function for more advanced DRAM clock settings. Memory Configuration Enter this function for more advanced memory settings. NOTE Overclock is an optional process, but not a “must-do” process; it is not recommended for inexperienced users.
PAGE 27
TA785G3/TA780G3/TA760G3 V6 Tech Engine This engine will make a good over-clock performance. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series T-Series Settings Exit Options WARNING: Please Clear CMOS if system no display after overclocking. OverClock Navigator [Automate OverClock] =========== Automate OverClock System =========== Auto OverClock System [V6-Tech Engine] ============ Manual OverClock System ============ CPU/HT Reference Clock (MHz) [200] CPU Configuration [Auto] > G.P.
PAGE 28
Motherboard Manual Notices: Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. B. Memory Integration Test (M.I.T.) This function is under “Overclocking Navigator Engine” item. MIT allows users to test memory compatibilities, and no extra devices or software are needed. Step 1 The default setting under this item is “Disabled”; the condition parameter should be changed to “Enable” to proceed this test.
PAGE 29
TA785G3/TA780G3/TA760G3 C. BIO-Flasher BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, save the BIOS file into a USB pen drive or a floppy disk. 3.
PAGE 30
Motherboard Manual D. Self Recovery System (S.R.S.) This function can’t be seen under BIOS setup; and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions. When the system hangs up, S.R.S. will automatically log in the default BIOS setting, and all overclock settings will be re-configured. E. Smart Fan Function Smart Fan Function is under “Smart Fan Configuration” in “Advanced Menu”.
PAGE 31
TA785G3/TA780G3/TA760G3 Smart Fan Calibration Choose this item and then the BIOS will automatically test and detect the CPU/System fan functions and show CPU/System fan speed. Control Mode This item provides several operation modes of the fan. Fan Ctrl OFF(℃) If the CPU/System temperature is lower than the set value, the CPU/ System fan will turn off. The range is from 0~127, with an interval of 1. Fan Ctrl On(℃) The CPU/System fan starts to work when CPU/System temperature arrives to this set value.
PAGE 32
Motherboard Manual 6.2 T-SERIES SOFTWARE Installing T-Series Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Auto-run function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to complete the installation.
PAGE 33
TA785G3/TA780G3/TA760G3 Over Clock Panel Restore Default Settings AUTO Over-Clock V3/V6/V9 Engine Real-time Ove r-clock Manual Adjust CPU Clock Test & Apply Manual Setting s AUTO User can click this button and the utility will set the best and stable performance and frequency automatically. A warning dialog as below will show up to notify you that the system may become unstable, click on “OK” to continue.
PAGE 34
Motherboard Manual Then the utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, launch the utility again and the utility will load the previously verified best and stable frequency. V3 / V6 / V9 Provide user the ability to do real-time over-clock adjustment. For beginners in over-clock field, this is a powerful feature to increase system performance. V3 Engine This engine will make a good over-clock performance.
PAGE 35
TA785G3/TA780G3/TA760G3 Over Voltage Panel Manual Adjust CPU/Memo ry/Chipset/FSB Voltage CPU Voltage This function allows user to adjust CPU voltage. or “-“ to decrease the CPU voltage. Click on “+” to increase Memory Voltage This function allows user to adjust Memory voltage. increase or “-“ to decrease the Memory voltage. Click on “+” to Chip Voltage This function allows user to adjust Chipset voltage. increase or “-“ to decrease the Chipset voltage.
PAGE 36
Motherboard Manual About Panel In this panel, you can get model name and other system information that may related to over-clocking. You can also get the version number of this software. Note Because the Over Clock and Over Voltage features are controlled by several separate chipset, the utility divides these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but it will not interfere with other panels’ functions.
PAGE 37
TA785G3/TA780G3/TA760G3 eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem. Before you use this utility, please set Outlook Express as your default e-mail client application program. represent s import ant *information that you must provide.
PAGE 38
Motherboard Manual Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail. We will not share customer’s data with any other third parties, so please feel free to provide your system information while using eHot-Line service.
PAGE 39
TA785G3/TA780G3/TA760G3 BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information AMI BIOS Online Update function Clear CMOS function (Only for AMI BIOS) (Only for AWARD BIOS) Save current BIOS to a .bin file Update BIOS with a BIOS file Once click on this button, the saving dialog will show. Choose the position to save file and enter file name.
PAGE 40
Motherboard Manual Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS. Click Yes for BIOS backup and refer to the Backup BIOS procedure; or click No to skip this procedure.
PAGE 41
TA785G3/TA780G3/TA760G3 (for AMI BIOS only) Automatically download and update the latest BIOS via internet; make sure that the computer is connected to the internet before using this function. After clicking on the Onlinr Update button, the utility will search for the latest BIOS from internet. If there is a new BIOS version, the utility will ask you to download it. Click Yes to proceed.
PAGE 42
Motherboard Manual CHAPTER 7: USEFUL HELP 7.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
PAGE 43
TA785G3/TA780G3/TA760G3 7.2 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3.
PAGE 44
Motherboard Manual 7.3 AMI BIOS BEEP CODE Boot Block Beep Codes Number of Beeps 1 2 3 4 5 7 10 11 12 13 Description No media present. (Insert diskette in floppy drive A:) “AMIBOOT.ROM” file not found in root directory of diskette in A: Insert next diskette if multiple diskettes are used for recovery Flash Programming successful File read error No Flash EPROM detected Flash Erase error Flash Program error “AMIBOOT.
PAGE 45
TA785G3/TA780G3/TA760G3 7.4 TROUBLESHOOTING Probable 1. There is no power in the system. Power LED does not shine; the fan of the power supply does not work 2. Indicator light on keyboard does not shine. System is inoperative. Keyboard lights are on, power indicator lights are lit, and hard drives are running. System does not boot from a hard disk drive, but can be booted from optical drive. Solution 1. 2. 3. Make sure power cable is securely plugged in. Replace cable. Contact technical support.
PAGE 46
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES GERMAN TA780G3/TA760G3 CPU TA785G3 Sockel AM3 Sockel AM3 AMD Athlon II / Phenom II Prozessoren AMD Athlon II / Phenom II Prozessoren Die AMD 64-Architektur unterstützt eine 32-Bit- Die AMD 64-Architektur unterstützt eine 32-Bitund 64-Bit-Datenverarbeitung und 64-Bit-Datenverarbeitung Unterstützt Hyper Transport 3.0 und Cool’n’Quiet Unterstützt Hyper Transport 3.
PAGE 47
TA785G3/TA780G3/TA760G3 TA780G3/TA760G3 LAN HD TA785G3 Realtek RTL 8111DL Realtek RTL 8111DL 10 / 100 / 1000 Mb/s Auto-Negotiation 10 / 100 / 1000 Mb/s Auto-Negotiation Halb-/ Vollduplex-Funktion Halb-/ Vollduplex-Funktion ALC662 ALC662 Audio-Unters 5.1-Kanal-Audioausgabe tützung Steckplätze Onboard-Ans chluss Rückseiten-E /A 5.
PAGE 48
Motherboard Manual FRENCH TA780G3/TA760G3 TA785G3 Socket AM3 Socket AM3 Processeurs AMD Athlon II / Phenom II Processeurs AMD Athlon II / Phenom II L'architecture AMD 64 permet le calcul 32 et 64 L'architecture AMD 64 permet le calcul 32 et 64 UC Bus frontal Chipset Super E/S bits bits Prend en charge Hyper Transport 3.0 et Prend en charge Hyper Transport 3.0 et Cool’n’Quiet Cool’n’Quiet (Watt maximum : 125W) (Watt maximum : 125W) Prend en charge Hyper Transport 3.
PAGE 49
TA785G3/TA780G3/TA760G3 TA780G3/TA760G3 TA785G3 Realtek RTL 8111DL Realtek RTL 8111DL LAN 10 / 100 / 1000 Mb/s négociation automatique 10 / 100 / 1000 Mb/s négociation automatique Half / Full duplex capability Half / Full duplex capability Prise en ALC662 ALC662 charge Sortie audio à 5.1 voies Sortie audio à 5.
PAGE 50
Motherboard Manual ITALIAN TA780G3/TA760G3 CPU FSB Chipset Socket AM3 Processori AMD Athlon II / Phenom II Processori AMD Athlon II / Phenom II L’architettura AMD 64 abilita la L’architettura AMD 64 abilita la computazione 32 e 64 bit computazione 32 e 64 bit Supporto di Hyper Transport 3.0 e Supporto di Hyper Transport 3.0 e Cool’n’Quiet Cool’n’Quiet (Watt massimo: 125W) (Watt massimo: 125W) Supporto di HyperTransport 3.0 fino a 5.2 Supporto di HyperTransport 3.0 fino a 4.
PAGE 51
TA785G3/TA780G3/TA760G3 TA780G3/TA760G3 TA785G3 Realtek RTL 8111DL LAN Supporto audio HD Alloggi Connettori su scheda Realtek RTL 8111DL Negoziazione automatica 10 / 100 / 1000 Mb/s Negoziazione automatica 10 / 100 / 1000 Mb/s Capacità Half / Full Duplex Capacità Half / Full Duplex ALC662 ALC662 Uscita audio 5.1 canali Uscita audio 5.
PAGE 52
Motherboard Manual SPANISH TA780G3/TA760G3 TA785G3 Conector AM3 Conector AM3 Procesadores AMD Athlon II / Phenom II Procesadores AMD Athlon II / Phenom II La arquitectura AMD 64 permite el procesado de La arquitectura AMD 64 permite el procesado de CPU FSB 32 y 64 bits 32 y 64 bits Soporta las tecnologías Hyper Transport 3.0 y Soporta las tecnologías Hyper Transport 3.0 y Cool’n’Quiet Cool’n’Quiet (Vatio máximo: 125W) (Vatio máximo: 125W) Admite HyperTransport 3.
PAGE 53
TA785G3/TA780G3/TA760G3 TA780G3/TA760G3 Red Local Soporte de sonido HD Ranuras Conectores en placa TA785G3 Realtek RTL 8111DL Realtek RTL 8111DL Negociación de 10 / 100 / 1000 Mb/s Negociación de 10 / 100 / 1000 Mb/s Funciones Half / Full dúplex Funciones Half / Full dúplex ALC662 ALC662 Salida de sonido de 5.1 canales Salida de sonido de 5.
PAGE 54
Motherboard Manual PORTUGUESE TA780G3/TA760G3 TA785G3 Socket AM3 Socket AM3 Processadores AMD Athlon II / Phenom II Processadores AMD Athlon II / Phenom II A arquitectura AMD 64 permite uma computação A arquitectura AMD 64 permite uma computação CPU FSB Chipset Especificaçã o Super I/O Memória principal Placa gráfica IDE SATA 52 de 32 e 64 bits de 32 e 64 bits Suporta as tecnologias Hyper Transport 3.0 e Suporta as tecnologias Hyper Transport 3.
PAGE 55
TA785G3/TA780G3/TA760G3 TA780G3/TA760G3 LAN Suporte para áudio de alta definição Ranhuras Conectores na placa TA785G3 Realtek RTL 8111DL Realtek RTL 8111DL Auto negociação de 10 / 100 / 1000 Mb/s Auto negociação de 10 / 100 / 1000 Mb/s Capacidade semi/full-duplex Capacidade semi/full-duplex ALC662 ALC662 Saída de áudio de 5.1 canais Saída de áudio de 5.
PAGE 56
Motherboard Manual POLISH TA780G3/TA760G3 Procesor FSB Chipset TA785G3 Socket AM3 Socket AM3 AMD Athlon II / Phenom II Procesory AMD Athlon II / Phenom II Procesory Architektura AMD 64 umożliwia przetwarzanie Architektura AMD 64 umożliwia przetwarzanie 32 i 64 bitowe 32 i 64 bitowe Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet Obsługa Hyper Transport 3.0 oraz Cool’n’Quiet (Maksymalny Watt: 125W) (Maksymalny Watt: 125W) Obsługa HyperTransport 3.0 o szerokości pasma Obsługa HyperTransport 3.
PAGE 57
TA785G3/TA780G3/TA760G3 TA780G3/TA760G3 TA785G3 Realtek RTL 8111DL LAN Obsługa audio HD Gniazda Złącza wbudowane Back Panel I/O Wymiary płyty Funkcje Realtek RTL 8111DL 110 / 100 / 1000 Mb/s z automatyczną 10 / 100 / 1000 Mb/s z automatyczną negocjacją negocjacją szybkości szybkości Działanie w trybie połowicznego / pełnego Działanie w trybie połowicznego / pełnego dupleksu dupleksu ALC662 ALC662 5.1 kanałowe wyjście audio 5.
PAGE 58
Motherboard Manual RUSSIAN TA780G3/TA760G3 Гнездо AM3 Процессоры AMD Athlon II / Phenom II CPU Архитектура AMD 64 разрешать обработка (центральный данных на 32 и 64 бит процессор) Поддержка Hyper Transport 3.0 и Cool’n’Quiet (Максимальный ватт: 125W) FSB Набор микросхем TA785G3 Гнездо AM3 Процессоры AMD Athlon II / Phenom II Архитектура AMD 64 разрешать обработка данных на 32 и 64 бит Поддержка Hyper Transport 3.0 и Cool’n’Quiet (Максимальный ватт: 125W) Поддержка HyperTransport 3.
PAGE 59
TA785G3/TA780G3/TA760G3 TA780G3/TA760G3 TA785G3 Локальная сеть Realtek RTL 8111DL Автоматическое согласование 10 / 100 / 1000 Мб/с Частичная / полная дуплексная способность Realtek RTL 8111DL Автоматическое согласование 10 / 100 / 1000 Мб/с Частичная / полная дуплексная способность Звуковая поддержка жесткого диска ALC662 Звуковая поддержка High-Definition 5.1канальный звуковой выход ALC662 Звуковая поддержка High-Definition 5.
PAGE 60
‫‪Motherboard Manual‬‬ ‫‪ARABIC‬‬ ‫‪TA785G3‬‬ ‫‪TA780G3/TA760G3‬‬ ‫‪AM3‬ﻣﻘﺒﺲ‬ ‫‪AM3‬ﻣﻘﺒﺲ‬ ‫‪AMD Athlon / Athlon II / Sempron /‬ﻣﻌﺎﻟﺠﺎت‬ ‫‪AMD Athlon / Athlon II / Sempron /‬ﻣﻌﺎﻟﺠﺎت‬ ‫وﺡﺪة اﻟﻤﻌﺎﻟﺠﺔ‬ ‫‪Phenom / Phenom II‬‬ ‫‪Phenom / Phenom II‬‬ ‫اﻟﻤﺮآﺰیﺔ‬ ‫إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺏﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬ ‫إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ ‪ 32‬و‪ 64‬ﺏﺖ‪AMD 64‬ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ‬ ‫‪ Cool’n’Quiet‬و ‪Hyper Transport 3.0‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬ ‫‪ Cool’n’Quiet‬و ‪Hyper Transport 3.
PAGE 61
‫‪TA785G3/TA780G3/TA760G3‬‬ ‫‪TA780G3/TA760G3‬‬ ‫ﺵﺒﻜﺔ داﺥﻠﻴﺔ‬ ‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬ ‫اﻟﺘﻌﺮیﻒ‬ ‫اﻟﻔﺘﺤﺎت‬ ‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬ ‫اﻟﻠﻮﺡﺔ‬ ‫ﻣﻨﺎﻓﺬ دﺥﻞ‪/‬ﺥﺮج‬ ‫اﻟﻠﻮﺡﺔ اﻟﺨﻠﻔﻴﺔ‬ ‫‪Realtek RTL 8111DL‬‬ ‫‪Realtek RTL 8111DL‬‬ ‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺏﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‬ ‫ﺗﻔﺎوض ﺗﻠﻘﺎﺋﻲ ‪ 100/10‬ﻣﻴﺠﺎ ﺏﺎیﺖ ‪ /‬ﺙﺎﻥﻴﺔ و‪1‬ﺝﻴﺠﺎ ﺏﺖ‪/‬ﺙﺎﻥﻴﺔ‬ ‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬ ‫إﻣﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻣﻞ‪/‬اﻟﻨﺼﻔﻲ‬ ‫‪ALC662‬‬ ‫‪ALC662‬‬ ‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪5.1‬‬ ‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‪5.
PAGE 62
Motherboard Manual JAPANESE TA780G3/TA760G3 TA785G3 Socket AM3 Socket AM3 AMD Athlon II / Phenom II プロセッサ AMD Athlon II / Phenom II プロセッサ AMD 64アーキテクチャでは、32ビットと64ビット計 AMD 64アーキテクチャでは、32ビットと64ビット計 CPU FSB チップセット算が可能です算が可能ですハイパートランスポート3.0とクールアンドクワイアハイパートランスポート3.0とクールアンドクワイアットをサポートしますットをサポートします (最高のワット: 125W) (最高のワット: 125W) 5.2 GT/sのバンド幅までハイパートランスポート3.0 4.4 GT/sのバンド幅までハイパートランスポート3.
PAGE 63
TA785G3/TA780G3/TA760G3 TA780G3/TA760G3 LAN HDオーディオのサポートスロットオンボードコネクタ背面パネル I/O Realtek RTL 8111DL Realtek RTL 8111DL 10 / 100 / 1000 Mb/秒のオートネゴシエーション 10 / 100 / 1000 Mb/秒のオートネゴシエーション半/全二重機能半/全二重機能 ALC662 ALC662 5.1チャンネルオーディオアウト 5.