TA690G AM2 Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Chapter 1: Introduction.......................................... 3 1.1 1.2 1.3 1.4 1.5 Before You Start ............................................................................ 3 Package Checklist......................................................................... 3 Motherboard Features.................................................................. 4 Rear Panel Connectors.................................................................. 6 Motherboard Layout...................
TA690G AM2 CHAPTER 1: INTRODUCTION BEFORE YOU START 1.1 Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: Prepare a dry and stable working environment with sufficient lighting. Always disconnect the computer from power outlet before operation.
Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC Socket AM2 CPU AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron processors FSB Chipset Supports up to 1 GHz Bandwidth Supports Hyper Transport and Cool=n=Quiet Support HyperTransport AMD 690G AMD SB600 ITE 8716F Super I/O AMD 64 Architecture enables 32 and 64 bit computing Environment Control initiatives, Provides the most commonly used legacy H/W Monitor Super I/O functionality.
TA690G AM2 SPEC Back Panel I/O Board Size Special Features IDE Connector x1 Each connector supports 2 IDE device SATA Connector x4 Each connector supports 1 SATA devices Front Panel Connector x1 Support front panel facilities Front Audio Connector x1 Support front panel audio function CD-in Connector x1 Support CD audio-in function S/PDIF out connector x1 Support digital audio out function S/PDIF in connector (Optional) x1 Support digital audio in function CPU Fan header x1 CPU Fan
Motherboard Manual 1.4 X Z REAR PANEL CONNECTORS PS/2 Mouse Port Y PS/2 Keyboard Port S-Video TV-Out Port Transmit analog video signals to TV or any other display panels equipped with S-Video input. [ HDMI Port The High-Definition Multimedia Interface (HDMI) is an all-digital audio/video interface capable of transmitting uncompressed streams to an AV receiver or any compatible digital audio and/or video monitor, such as a digital television.
TA690G AM2 1.5 MOTHERBOARD LAYOUT JKBMS1 JCFAN1 JTVOUT1 JATXPWR2 DIMMB2 DIMMA2 DIMMA1 Socket A M2 JNFAN1 JUSB1 AUDIO1 IDE1 AMD 690G JUSBLAN1 FDD1 VGA DVI-D DIMMB1 JHDMI JATXPWR1 LAN JAUDIOF1 PEX16_1 BAT1 PEX1_1 Codec JSPDIF_OUT1 JCMOS1 JSPDIF_IN1 BIOS AMD SB600 JCDIN1 PCI1 LED_D1 LED_D2 PCI2 Super I/O JPRNT1 JCOM1 JUSB2 JUSB3 JUSB4 JSFAN2 JSFAN1 SATA2 SATA1 SATA4 SATA3 JPANEL1 PWRSW1 RSTSW1 Note: ■ represents the 1st pin.
Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Remove the socket protection cap. Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 3: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
TA690G AM2 Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation.
Motherboard Manual 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
TA690G AM2 2.3 INSTALLING SYSTEM MEMORY DIMMA1 DIMMB1 DIMMA2 DIMMB2 A. Memory Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
Motherboard Manual B. Memory Capacity DIMM Socket Location DDR2 Module DIMMA1 256MB/512MB/1024MB DIMMB1 256MB/512MB/1024MB DIMMA2 256MB/512MB/1024MB DIMMB2 256MB/512MB/1024MB Total Memory Size Max is 4GB. C. Dual Channel Memory installation To trigger the Dual Channel function of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pairs, shown in the following table.
TA690G AM2 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 34 33 2 1 IDE1: Hard Disk Connector The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.
Motherboard Manual PEX16_1: PCI-Express x16 Slot - PCI-Express 1.0a compliant. Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, for an aggregate of 8GB/s totally. PEX1_1: PCI-Express x1 slots - PCI-Express 1.0a compliant. Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express supports a raw bit-rate of 2.5GB/s on the data pins. 2X bandwidth over the traditional PCI architecture.
TA690G AM2 CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DETAIL SETTINGS JPANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button and speaker connection. It allows user to connect the PC case’s front panel switch functions.
Motherboard Manual JATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Pin 13 14 15 16 17 18 19 20 21 22 23 24 Assignment +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground Pin 1 2 3 4 5 6 7 8 9 10 11 12 12 24 1 13 Assignment +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
TA690G AM2 JUSB2/JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. JUSB2 JUSB3 JUSB4 2 1 10 9 Pin 1 Assignment +5V (fused) 2 +5V (fused) 3 USB- 4 5 USBUSB+ 6 USB+ 7 Ground 8 9 Ground Key 10 NC JAUDIOF1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel.
Motherboard Manual JCDIN1: CD-ROM Audio-in Connector This connector allows user to connect the audio source from the variaty devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.. Pin 1 2 3 4 4 Assignment Left Channel Input Ground Ground Right Channel Input 1 JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard.
TA690G AM2 SATA1~SATA4: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 4 channels SATA interface. SATA2 SATA1 SATA4 SATA3 1 4 7 Pin 1 2 3 4 5 6 7 Assignment Ground TX+ TXGround RXRX+ Ground JPRNT1: Printer Port Connector This header allows you to connector printer on the PC.
Motherboard Manual JSPDIF_OUT1: Digital Audio-out Connector This connector allows user to connect the PCI bracket SPDIF output header. Pin 1 2 3 3 Assignment +5V SPDIF_OUT Ground 1 JSPDIF_IN1: Digital Audio-out Connector (Optional) This connector allows user to connect the PCI bracket SPDIF input header. Pin 1 2 3 3 Assignment +5V SPDIF_IN Ground 1 JCOM1: Serial port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port.
TA690G AM2 On-Board Buttons There are 2 on-board buttons. RSTSW1 PWRSW1 PWRSW1: This is an on-board Power Switch button. RSTSW1: This is an on-board Reset button. On-Board LED Indicators There are 2 LED indicators on the motherboard to show system status. LED_D1 LED_D2 LED_D1 and LED_D2: These 2 LED indicate system power on diagnostics. Please refer to the table below for different messages: LED_D1 ON ON OFF OFF LED_D2 ON OFF ON OFF Message Normal Memory Error VGA Error Abnormal: CPU / Chipset error.
Motherboard Manual CHAPTER 4: RAID FUNCTIONS OPERATION SYSTEM 4.1 z Supports Windows XP Home/Professional Edition, and Windows Vista. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. RAID 1+0: RAID 1+0 combines the techniques used in RAID 0 and RAID 1. 4.
TA690G AM2 RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
Motherboard Manual RAID 1+0: RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0 solution for improved resiliency, performance and rebuild performance. Features and Benefits - - Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. Benefits: Optimizes for both fault tolerance and performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks.
TA690G AM2 CHAPTER 5: OVERCLOCK QUICK GUIDE 5.1 T-POWER INTRODUCTION Biostar T-Power is a whole new utility that is designed for overclock users. Based on many precise tests, Biostar Engineering Team (BET) has developed this ultimate overclock engine to raise system performance. No matter whether under BIOS or Windows interface, T-Power is able to present the best system state according to users’ overclock setting. T-Power BIOS Features: Overclocking Navigator Engine (O.N.E.) CMOS Reloading Program (C.
Motherboard Manual 5.2 T-POWER BIOS FEATURE A. Overclocking Navigator Engine (O.N.E.): ONE provides two powerful overclocking engines: MOS and AOS for both Elite and Casual overclockers. Manual Overclock System (M.O.S.) MOS is designed for experienced overclock users. It allows users to customize personal overclock settings.
TA690G AM2 CPU Overclock Setting: CPU Voltage: This function will increase CPU stability when overclocking. However, the CPU temperature will increase when CPU voltage is increased. Choices: The range is from 1.2V to 1.725V, with an interval of 0.0.25V. CPU Frequency: CPU Frequency is directly in proportion to system performance. To maintain the system stability, CPU voltage needs to be increased also when raising CPU frequency. Choices: This range is from 200 to 450, with an interval of 1MHz.
Motherboard Manual Automatic Overclock System (A.O.S.) For beginners in overclock field, BET had developed an easy, fast, and powerful feature to increase the system performance, named A.O.S. Based on many tests and experiments, A.O.S. provides 3 ideal overclock configurations that are able to raise the system performance in a single step. V6 Tech Engine: This setting will raise about 10%~15% of whole system performance. V8 Tech Engine: This setting will raise about 15%~25% of whole system performance.
TA690G AM2 V12 Tech Engine: This setting will raise about 25%~30% of whole system performance. Notices: 1. Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. 2. From BET experiments, the Atholon64 FX CPU is not suitable for this A.O.S. feature. B. CMOS Reloading Program (C.R.P.): It allows users to save different CMOS settings into BIOS-ROM. Users are able to reload any saved CMOS setting for customizing system configurations.
Motherboard Manual C. Memory Integration Test (M.I.T.): This function is under “Overclocking Navigator Engine” item. MIT allows users to test memory compatibilities, and no extra devices or software are needed. Step 1: The default setting under this item is “Disabled”; the condition parameter should be changed to “Enable” to proceed this test. ↓ Step 2: Save and Exit from CMOS setup and reboot the system to activate this test. Run this test for 5 minutes (minimum) to ensure the memory stability.
TA690G AM2 D. Self Recovery System (S.R.S.): This function can’t be seen under T-Power BIOS setup; and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions. When the system hangs up, S.R.S. will automatically log in the default BIOS setting, and all overclock settings will be re-configured. E. Integrated Flash Program (I.F.P.): IFP is a safe and quick way to upgrade BIOS. Step 1: Go to Biostar website (http://www.biostar.com.
Motherboard Manual F. Smart Fan Function: Smart Fan Function is under “PC Health Status”. This is a brilliant feature to control CPU Temperature vs. Fan speed. When enabling Smart Fan function, Fan speed is controlled automatically by CPU temperature. This function will protect CPU from overheat problem and maintain the system temperature at a safe level. ↓ CPU Fan Off <℃>: If the CPU temperature is lower than the set value, the CPU fan will turn off. The range is from 0℃~127℃, with an interval of 1℃.
TA690G AM2 Start PWM Value When CPU temperature arrives to the set value, the CPU fan will work under Smart Fan Function mode. The range is from 0~127, with an interval of 1. Slope PWM Choices: 1 PWM Value/℃ (default), 2 PWM Value/℃, 4 PWM Value/℃, 8 PWM Value/℃, 16 PWM Value/℃, 32 PWM Value/℃, 64PWM Value/℃. S1: CPU temperature is 60℃, and PWM value is 1 PWM/℃. S2: CPU temperature is 60℃, and PWM value is 2 PWM/℃. S3: CPU temperature is 60℃, and PWM value is 3 PWM/℃.
Motherboard Manual 5.3 T-POWER WINDOWS FEATURE A.Hardware Monitor: T-Power Hardware monitor allows users to monitor system voltage, temperature and fan speed accordingly. Additionally, a rescue action will be taken by the program automatically while the system faces an abnormal condition. The program will trigger an alarm or shut down the system when unpredictable errors occur. All the monitoring items are illustrated by a waveform diagram. Hardware Monitor Toolbar i.
TA690G AM2 CPU Temperature This column configures the CPU temperature. There is a waveform to represent the status of CPU temperature. By adjusting , users can easily configure the upper limit of CPU temperature for system operating. In this diagram, the white line represents the upper limit which user-set for CPU temperature and the green line shows present CPU temperature.
Motherboard Manual CPU/Battery Voltage i. VCore This item displays the CPU voltage, represented by a light blue line. Users can set the upper and lower limit by adjusting to monitor the CPU operating voltage. If CPU voltage is higher or lower than the set value, the status line will change into a red warning line, and a warning sound will alert you. Also, the system tray icon will change to . ii. VBAT This item displays the CMOS battery voltage, represented by a light green line.
TA690G AM2 B. Overclocking Configurations This diagram is designed for T-series Overclocking utility. Friendly interface and solid overclock features are the major concept of this utility. Graphic 1 will appear when activating this utility. Graphic 1 A. B. C. D. E. F. Graphic 2 G. H. Clicking on “Biostar” will lead you to the Biostar Homepage. This column shows the CPU speed information. Click on this button and the utility will pop-up 4 sub-screens (Please refers to Graphic 3).
Motherboard Manual CPU Overclocking Settings: By adjusting can configure three items for CPU overclocking. A. CPU Frequency Range: 200MHz~450MHz. Interval: 1MHz. B. CPU Ratio Range: 4~25. Interval: 1. C. CPU Voltage Range: 0.8V~2.0V. Interval: 0.0125V. Memory Overclocking Settings: By adjusting can configure two items for Memory overclocking. A. Memory Clock Frequency Choices: 100, 133, 200, 266, 333, 400, 533, 667, 800. B. Memory Voltage Range: 1.8V~2.8V. Interval: 0.1V.
TA690G AM2 PCI Overclocking Setting: This diagram shows present PCI working status and helps to monitor PCI peripherals working status. This item cannot be adjusted.
Motherboard Manual C. Smart Fan Function When Smart Fan Function is activated, screens will pop-up to illustrate the fan speed information. i. CPU Temperature: Show current CPU temperature. ii. CPU Fan speed: Show current CPU Fan speed. iii. System Fan speed: Show current system Fan speed. iv. Calibrate: When changing CPU Fan or System Fan, click on this button to re-calibrate the Fan speed. Note: 1. 2.
TA690G AM2 v. Auto: If the green indicator is lit up, the Smart Fan Function is “On” (Default Setting). Click on this button again to close Smart Fan Function, and a screen as below would pop-up. There will be pulling-meter besides the CPU Fan and System Fan, the CPU Fan and the System Fan speed can be adjusted by adjusting the Cursor Up or Down. vi. Program Tool Bar: z About: Click on this button to get program-related information.
Motherboard Manual D. Live Update When Live Update program is activated, a screen will pop up to illustrate BIOS related information. i. Link to Internet: Click on this button will link to Biostar website and BIOS file will be downloaded. ii. Update BIOS: Click on this button to run BIOS flashing process, and it’s easy and safe. iii. Backup BIOS: Click on this button, and BIOS file will be saved into the user-selected folder. iv. Clear CMOS: Click on this item will clear the CMOS Data.
TA690G AM2 CHAPTER 6: USEFUL HELP 6.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
Motherboard Manual 6.2 AWARD BIOS BEEP CODE Beep Sound One long beep followed by two short beeps High-low siren sound Meaning Video card not found or video card memory bad CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps every other second 6.3 No DRAM detected or install EXTRA INFORMATION A. BIOS Update After you fail to update BIOS or BIOS is invaded by virus, the Boot-Block function will help to restore BIOS.
TA690G AM2 B. CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed.
Motherboard Manual 6.4 TROUBLESHOOTING Probable Solution 1. No power to the system at all 1. Make sure power cable is Power light don’t illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on keyboard does not turn on. System inoperative. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard drive is spinning.
TA690G AM2 This page is intentionally left blank.
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN Spezifikationen Die AMD 64-Architektur unterstützt eine 32-Bit- und Sockel AM2 CPU AMD Athlon 64 / Athlon 64 FX / Athlon 64 64-Bit-Datenverarbeitung x2/ Sempron Prozessoren FSB Chipsatz Super E/A Unterstützt Hyper Transport und Cool’n’Quiet Unterstützt HyperTransport mit einer Bandbreite von bis zu 1 GHz AMD 690G AMD SB600 ITE 8716F Umgebungskontrolle, Bietet die häufig verwendeten alten Hardware-Überwachung Super E/A-Funktionen.
TA690G AM2 Spezifikationen Fronttafelanschluss x1 Unterstützt die Fronttafelfunktionen Front-Audioanschluss x1 Unterstützt die Fronttafel-Audioanschlussfunktion CD-IN-Anschluss x1 Unterstützt die CD Audio-In-Funktion S/PDIF- Ausgangsanschluss x1 Unterstützt die digitale Audioausgabefunktion S/PDIF Eingangsanschluss (optional) x1 Unterstützt die digitale Audioeingabefunktion CPU-Lüfter-Sockel x1 CPU-Lüfterstromversorgungsanschluss (mit Smart Fan-Funktion) System-Lüfter-Sockel x3 System-Lüfter-Str
Motherboard Manual FRANCE SPEC Socket AM2 UC Processeurs AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/ Sempron Bus frontal Chipset Super E/S L'architecture AMD 64 permet le calcul 32 et 64 bits Prend en charge Hyper Transport et Cool’n’Quiet Prend en charge Hyper Transport jusqu'à une bande passante de1 GHz AMD 690G AMD SB600 ITE 8716F Initiatives de contrôle environnementales, Fournit la fonctionnalité de Super E/S Moniteur de matériel patrimoniales la plus utilisée.
TA690G AM2 SPEC Connecteur SATA x4 Connecteur du panneau avant Chaque connecteur prend en charge 1 périphérique SATA x1 Prend en charge les équipements du panneau avant Connecteur Audio du panneau avant x1 Prend en charge la fonction audio du panneau avant Connecteur d'entrée CD x1 Prend en charge la fonction d'entrée audio de CD Connecteur de sortie S/PDIF x1 Prend en charge la fonction de sortie audio numérique Connecteur d'entrée S/PDIF x1 (en option) Embase de ventilateur UC x1 Embase
Motherboard Manual ITALIAN SPECIFICA L’architettura AMD 64 abilita la computazione 32 Socket AM2 CPU Processori AMD Athlon 64 / Athlon 64 e 64 bit FX / Athlon 64 x2/ Sempron FSB Chipset Supporto di Hyper Transport e Cool’n’Quiet Supporto di HyperTransport fino a1 GHz di larghezza di banda AMD 690G AMD SB600 ITE 8716F Super I/O Funzioni di controllo dell’ambiente: Fornisce le funzionalità legacy Super Monitoraggio hardware I/O usate più comunemente.
TA690G AM2 SPECIFICA Connettore pannello frontale x1 Supporta i servizi del pannello frontale Connettore audio frontale x1 Supporta la funzione audio pannello frontale Connettore CD-in x1 Supporta la funzione input audio CD Connettore output SPDIF x1 Supporta la funzione d’output audio digitale Connettore input S/PDIF x1 (optional) Collettore ventolina CPU x1 Collettore ventolina sistema x3 Collettore cancellazione CMOS x1 Connettore USB x3 Connettore Porta seriale x1 Connettore alim
Motherboard Manual SPANISH Especificación Conector AM2 CPU La arquitectura AMD 64 permite el procesado de 32 y Procesadores AMD Athlon 64 / Athlon 64 64 bits FX / Athlon 64 x2/ Sempron FSB Soporta las tecnologías Hyper Transport y Cool’n’Quiet Admite HyperTransport con un ancho de banda de hasta1 GHz Conjunto de AMD 690G chips AMD SB600 Iniciativas de control de entorno, ITE 8716F Súper E/S Le ofrece las funcionalidades heredadas de Monitor hardware uso más común Súper E/S.
TA690G AM2 Especificación Conector de panel frontal X1 Soporta instalaciones en el panel frontal Conector de sonido frontal X1 Soporta funciones de sonido en el panel frontal Conector de entrada de CD X1 Soporta función de entrada de sonido de CD Conector de salida S/PDIF X1 Soporta función de salida de sonido digital Conector de entrada S/PDIF x1 (opcional) Cabecera de ventilador de CPU X1 Soporta función de entrada de sonido digital Fuente de alimentación de ventilador de CPU (con función
Motherboard Manual PORTUGUESE ESPECIFICAÇÕES A arquitectura AMD 64 permite uma computação de 32 Socket AM2 CPU Processadores AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2/ Sempron FSB Chipset o Super I/O Suporta as tecnologias Hyper Transport e Cool’n’Quiet Suporta a tecnologia HyperTransport com uma largura de banda até1 GHz AMD 690G AMD SB600 ITE 8716F Especificaçã e 64 bits Iniciativas para controlo do ambiente Proporciona as funcionalidades mais utilizadas em termos da especificação Super I/O.
TA690G AM2 ESPECIFICAÇÕES Conector SATA x4 Cada conector suporta 1 dispositivo SATA Conector do painel frontal x1 Para suporte de várias funções no painel frontal Conector de áudio frontal x1 Suporta a função de áudio no painel frontal Conector para entrada de CDs x1 Suporta a entrada de áudio a partir de CDs Conector de saída S/PDIF x1 Suporta a saída de áudio digital Conector de entrada S/PDIF (opcional) x1 Conector da ventoinha da CPU x1 Conector da ventoinha do sistema x3 Conector p
Motherboard Manual POLISH SPEC Socket AM2 Procesor Architektura AMD 64 umożliwia przetwarzanie 32 i 64 AMD Athlon 64 / Athlon 64 FX / Athlon 64 bitowe x2/ Sempron Procesory FSB Chipset Obsługa Hyper Transport oraz Cool’n’Quiet Obsługa HyperTransport o szerokości pasma do1 GHz AMD 690G AMD SB600 Każde gniazdo DIMM obsługuje moduły 256/512MB Pamięć Gniazda DDR2 DIMM x 4 główna Maks.
TA690G AM2 SPEC Złącze SATA x4 Każde złącze obsługuje 1 urządzenie SATA Złącze panela przedniego x1 Obsługa elementów panela przedniego Przednie złącze audio x1 Obsługa funkcji audio na panelu przednim Złącze wejścia CD x1 Obsługa funkcji wejścia audio CD Złącze wyjścia S/PDIF x1 Obsługa funkcji cyfrowego wyjścia audio Złącze wejścia S/PDIF (opcja) x1 Obsługa funkcji cyfrowego wejścia audio Złącze główkowe wentylatora procesora x1 Złącze główkowe wentylatora systemowego x3 Zasilanie we
Motherboard Manual RUSSIAN СПЕЦ.
TA690G AM2 СПЕЦ.
Motherboard Manual ARABIC اﻟﻤﻮاﺻﻔﺎت AM2ﻡﻘﺒﺲ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ AMD Athlon 64 / Athlon 64 FX /ﻡﻌﺎﻟﺠﺎت Athlon 64 x2/ Sempron إﺝﺮاء اﻟﻌﻤﻠﻴﺎت اﻟﺤﺎﺳﻮﺏﻴﺔ ﺏﺴﺮﻋﺔ 32و 64ﺏﺖAMD 64ﺗﻤﻜﻦ ﺗﻘﻨﻴﺔ Cool’n’Quietو Hyper Transportﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ 1000ﺏﺘﺮدد ﻳﺼﻞ إﻟﻰ HyperTransportﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ اﻟﺠﺎﻥﺒﻲ ﺗﺮدد AMD 690G ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ AMD SB600 ﻡﻴﺠﺎ ﺏﺎﻳﺖ و 1ﺝﻴﺠﺎ 256/512ﺳﻌﺔ DDR2ﺗﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع DIMMﺗﺪﻋﻢ آﻞ ﻓﺘﺤﺔ ﻓﺘﺤﺔ DDR2 DIMM اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ
TA690G AM2 اﻟﻤﻮاﺻﻔﺎت ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ ﻋﺪد 1 ﻡﻨﻔﺬ ﻃﺎﺏﻌﺔ ﻋﺪد 1 ﻡﻨﻔﺬ IDE ﻋﺪد 1 IDEﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ اﺙﻨﻴﻦ ﻡﻦ أﺝﻬﺰة ﻡﻨﻔﺬ SATA ﻋﺪد 4 SATAﻳﺪﻋﻢ آﻞ ﻡﻨﻔﺬ واﺣﺪ ﻡﻦ أﺝﻬﺰة ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻋﺪد 1 ﻳﺪﻋﻢ ﺗﺠﻬﻴﺰات اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ اﻟﺼﻮت ﺏﺎﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ ﻡﻨﻔﺬ CD-IN ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ دﺥﻞ ﺹﻮت اﻟﻘﺮص اﻟﻤﺪﻡﺞ اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ ﻡﻨﻔﺬ ﺥﺮج S/PDIF ﻋﺪد 1 ﻳﺪﻋﻢ وﻇﻴﻔﺔ ﺥﺮج اﻟﺼﻮت اﻟﺮﻗﻤﻲ اﻟﻠﻮﺣﺔ ﻡﻨﻔﺬ دﺥﻞ ) S
Motherboard Manual JAPANESE 仕様 AMD 64アーキテクチャでは、32ビットと64ビット計算が可 Socket AM2 CPU AMD Athlon 64 / Athlon 64 FX / Athlon 64 能です ハイパートランスポートとクールアンドクワイアットをサポ x2/ Sempron プロセッサ ートします FSB 1GHzのバンド幅までハイパートランスポート をサポートします AMD 690G チップセット AMD SB600 各DIMMは 256/512MB & 1GB DDR2をサポート DDR2 DIMMスロット x 4 デュアル チャンネルモードDDR2メモリモジュール 最大メモリ容量4GB DDR2 400 / 533 / 667 / 800をサポート メインメモリ 登録済みDIMMとECC DIMMはサポートされません ITE 8716F Super I/O グラフィック 環境コントロールイニシアチブ、 もっとも一般に使用されるレガシーSuper I/O H/Wモニター 機能を採用しています。 ファン速度コントローラ/
TA690G AM2 仕様 オンボードコ ネクタ フロッピーコネクタ x1 各コネクタは2つのフロッピードライブをサポートします プリンタポートコネクタ x1 各コネクタは1つのプリンタポートをサポートします IDEコネクタ x1 各コネクタは2つのIDEデバイスをサポートします SATAコネクタ x4 各コネクタは1つのSATAデバイスをサポートします フロントパネルコネクタ x1 フロントパネル機能をサポートします フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします CDインコネクタ x1 CDオーディオイン機能をサポートします S/PDIFアウトコネクタ x1 デジタルオーディオアウト機能をサポートします S/PDIFインコネクタ (オプション) x1 デジタルオーディオイン機能をサポートします CPUファンヘッダ x1 CPUファン電源装置(スマートファン機能を搭載) システムファンヘッダ x3 システムファン電源装置 CMOSクリアヘッダ x1 USBコネクタ x3 各コネクタは2つのフロントパ