Owner's Manual

P4VTB BIOS Setup
17
5 Integrated Peripherals
 Figure 5. Integrated Peripherals
VIA O nChip IDE Device
If you highlight the literal “Press Enter” next to the “VIA OnChip IDE Device” label and then
press the enter key, it will take you a submenu with the following options:
On-Chip Serial ATA
This item allows you to choose “Disabled” to disabled SATA Controller, “Auto”
auto arrange by bios, “Combined Mode” PATA and SATA are combined with a
maximun of 2 IDE drives in each channels, “Enhanced Mode” enabled SATA and
PAT A with a maximun of 6 IDE drives, “SAT A Only” SAT A is operat in g in
legacy mode.
The Choices: Enabled (default), Disabled.
IDE DMA Transfer Access
The “onboard” IDE drive interface supports IDE DMA read/write function.
The Ch o i ce s : En a ble d (default), Disabled.
OnChip IDE Channel 0/1
The motherboard chipset contains a PCI IDE interface with support for
two IDE channels. Select “Enabled” to activate the first and/or second IDE
interface. Select “Disabled” to deactivate an interface if you are going to install a
primary and/or secondary add-in IDE interface.
The Ch o i ce s : En a ble d (default), Disabled.