P4M900-M7 SE/P4M890-M7 TE Setup Manual FCC Information and Copyright This equipment has been tes ted and found to comply with the limits of a Class B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed to provide reasonable protec tion against harmful interference in a residential installation.
Table of Contents Chapter 1: Introduction ............................................. 3 1.1 1.2 1.3 1.4 1.5 Before You Start................................................................... 3 Package Checklist................................................................ 3 Motherboard Features.......................................................... 4 Rear Panel Connectors.......................................................... 5 Motherboard Layout .................................................
P4M900-M7 SE/P4M890-M7 TE CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU ST ART Thank you for choosing our product. Be fore you start installing the mothe rboard, please make sure you follow the instructions be low: Prepare a dry and stable work ing environment with sufficie nt lighting. Avoid touching the compone nts on mothe rboard or the rear side of the board unless ne cessary. Hold the board on the edge , do not try to be nd or flex the board.
Motherboard Manual 1.3 MOT HERBOARD FEAT URES P4M900-M7 SE P4M890-M7 TE LGA 775 LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / Intel Core2Duo/ Pe ntium 4 / Pentium D / Celeron D / Cel eron 4xx pr ocessor up to 3.8 Celeron D / Cel eron 4xx pr ocessor up to 3.
P4M900-M7 SE/P4M890-M7 TE P4M900-M7 SE Slots On Board Connector Back Panel I/O P4M890-M7 TE PCI Expr ess x 16 slot x1 PCI Expr ess x 16 slot x1 PCI Expr ess x 1 slot x1 PCI Expr ess x 1 slot x1 PCI slot x2 PCI slot x2 Floppy connector Printer Port C onnector x1 x1 Floppy connector Printer Port C onnector x1 x1 IDE Co nnector x2 IDE Co nnector x2 SATA Connector x2 SATA Connector x2 Front Pa nel Co nnector x1 Front Pa nel Co nnector x1 Front Audi o Co nnector x1 Front Audi o
Motherboard Manual 1.5 MOT HERBOARD LAYOUT JCFAN1 JKBMS1 COM1 JCOM1 LGA775 CPU1 DIMM1 JVGA1 JPRNT1 DIMM2 JATXPWR1 JUSBLAN1 P4M900 or P4M890 IDE1 JATXPWR2 IDE2 JUSB1 LAN JAUDIO1 PCI-EX16 Super I/O PCI-EX1_1 BAT1 BIOS JU SB2 PCI1 JCDIN1 JSATA2 VIA VT8237A JSATA1 JUSB3 PCI2 JCMOS1 Codec JAUDIOF1 FDD1 JSFAN1 JPAN EL 1 Not e: ■ represe nts the 1st pin.
P4M900-M7 SE/P4M890-M7 TE CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. Pin Cap Step 1: Pull the socket locking lever out from the socket and then raise the lever up to a 90-degree angle.
Motherboard Manual Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1: Step 2-2: Step 3: Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it on the retention frame. Connect the CPU FAN power cable into the JCFAN1. This completes the installation.
P4M900-M7 SE/P4M890-M7 TE 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
Motherboard Manual 2.3 INST ALLING SYST EM MEMORY DIMM1 DIMM2 A. Memory Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. B.
P4M900-M7 SE/P4M890-M7 TE 2.4 CONNECT ORS AND SLOT S FDD1: Floppy Disk Conne ctor The motherboard prov ides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the prov ided f loppy drive ribbon cable. 2 34 1 33 IDE1/IDE2: Hard Disk Conne ctors The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.
Motherboard Manual PCI-EX16: PCI-Express x16 Slot - PCI-Express 1.0a compliant. - Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, f or an aggregate of 8GB/s totally. PCI-EX1_1: PCI-Express x1 Slot - PCI-Express 1.0a compliant. - Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total. PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. 2X bandwidth ov er the traditional PCI architecture.
P4M900-M7 SE/P4M890-M7 TE CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW T O SET UP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened 3.2 Pin closed Pin1-2 closed DET AIL SETT INGS JPANEL1: Front Panel Heade r This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep button and speaker connection. It allows user to connect the PC case’s f ront panel switch functions.
Motherboard Manual ATX Powe r Source Conne ctor: JATXPWR1 JATXPWR1 allows user to connect 24-pin power connector on the ATX power supply. 12 24 1 13 Pin Assignment Pin Assignment 13 14 15 16 17 18 19 20 21 22 23 24 +3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground 1 2 3 4 5 6 7 8 9 10 11 12 +3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.
P4M900-M7 SE/P4M890-M7 TE JUSB2/JUSB3: Heade rs for USB 2.0 Ports at Front Panel This header allows user to connect additional USB cable on the PC f ront panel, and also can be connected with internal USB devices, like USB card reader. 2 10 JUSB2 1 9 JUSB3 Pin 1 2 3 4 5 6 7 8 9 10 Assignment +5V (fused) +5V (fused) USBUSBUSB+ USB+ Ground Ground Key NC JSATA1/JSATA2: Se rial ATA Conne ctors The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace, it satisfies the SATA 1.
Motherboard Manual JCDIN1: CD-RO M Audio-in Connector This connector allows user to connect the audio source f rom the v ariaty dev ices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc. Assignment Left Channel Input Ground Ground Right Channel Input Pin 1 2 3 4 4 1 JCMO S1: Cle ar CMOS Heade r By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting and the CMOS data, please carefully f ollow the procedures to avoid damaging the motherboard.
P4M900-M7 SE/P4M890-M7 TE JPRNT1: Printe r Port Connector This header allows you to connector printer on the PC.
Motherboard Manual CHAPTER 4: RAID FUNCTIONS 4.1 O PERAT ION SYST EM z Supports Windows XP Home/Prof essional Edition, and Windows 2000 Prof essional. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data. 4.3 HOW RAID WORKS RAID 0: The controller “ stripes” data across multiple drives in a RAID 0 array system.
P4M900-M7 SE/P4M890-M7 TE RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure.
Motherboard Manual CHAPTER 5: USEFUL HELP 5.1 DRIVER INST ALLAT ION NOT E After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn’t show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.
P4M900-M7 SE/P4M890-M7 TE 5.2 AWARD BIOS BEEP CODE Beep Sound One long beep followed by two short beeps High-low siren sound Meaning Video card not found or v ideo card memory bad CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps every other second 5.
Motherboard Manual 5.4 TROUBLESHOOT ING Probable Solution 1. Make sure power cable is No power to the system at all securely plugged in. Power light don’t illuminate, f an inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on key board does not turn on. System inoperativ e. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning.
P4M900-M7 SE/P4M890-M7 TE CHAPTER 6: WARPSPEEDER™ III 6.1 INT RODUCT ION [WarpSpeeder™ III], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage.
Motherboard Manual 6.3 INST ALLAT ION 1. Execute the setup execution file, and then the following dialog will pop up. Please click “Next” button and follow the default procedure to install. 2. When you see the following dialog in setup procedure, it means setup is completed. Click “Finish” button. Usage : The following figures are only for reference, the screen printed in this user manual will change according to your motherboard on hand.
P4M900-M7 SE/P4M890-M7 TE 6.4 WARPSPEEDER™ III 1. Desktop Icon: After the [WarpSpeeder™ III] has been installed, a [WarpSpeeder™ III] icon will appear on the desktop, just like the icon shown below. Now you can launch the [WarpSpeeder™ III] utility simply by double-clicking the desktop icon. 2. Main Panel If you double-click the desktop icon, [WarpSpeeder™ III] will be launched. Please refer to the following figure; the utility’s first window you will see is Main Panel.
Motherboard Manual 3. Overclock/Overvoltage Panel Click the Overclock/Overvoltage button in the Main Panel, the button will be highlighted and the Overclock/Overvoltage Panel will show up as the following figure. As you can see, the Overclock Panel is on the right side, and the Overvoltage Panel is on the left side.
P4M900-M7 SE/P4M890-M7 TE O ve rclock Panel contains these fe atures: a. “Auto-Overclock”: User can click this button and [WarpSpeeder™ III] will set the best and stable performance and frequency automatically. A warning dialog as below will show up to notify you that the system may become unstable, click on “OK” to proceed. Then [WarpSpeeder™ III] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function.
Motherboard Manual O ve rvoltage Panel contains these fe ature s: a. b. “CPU Voltage”: This function allows user to adjust CPU voltage. increase or “-“ to decrease the CPU voltage. Click on “+” to “Memory Voltage”: This function allows user to adjust Memory voltage. to increase or “-“ to decrease the Memory voltage. Click on “+” 4. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will show up as the following figure.
P4M900-M7 SE/P4M890-M7 TE 5. About Panel Click the “about” button in Main Panel, the button will be highlighted and the About Panel will show up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the the version number of [WarpSpeeder™ III] utility.
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN P4M900-M7 SE CPU P4M890-M7 TE LGA 775 LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / Intel Core2Duo/ Pe ntium 4 / Pentium D / Celeron D / Celero n 4xx Pr ozessoren mit Celeron D / Celero n 4xx Pr ozessoren mit bis zu 3,8 GHz bis zu 3,8 GHz Unterstützt Hyper-Thre ading / Execute Unterstützt Hyper-Thre ading / Execute Disable Bit / Enha nced I ntel Spee dStep® / Disable Bit / Enha nced I ntel Spee dStep® / Intel Architecture-64 / E
P4M900-M7 SE/P4M890-M7 TE P4M900-M7 SE LAN PHY Audio-Code c P4M890-M7 TE Realtek RTL 8201CL PH Y/ Realtek RTL 8201CL PH Y/ Atheros AR8012 PHY (optio nal) Atheros AR8012 PHY (optio nal) 10 / 100 Mb/s A uto-Negotiation 10 / 100 Mb/s A uto-Negotiation Halb-/ Vollduplex- Funktion Halb-/ Vollduplex- Funktion ALC662 ALC662 Unterstützt High- Definitio n Audio Unterstützt High- Definitio n Audio 5.1-Kanal-Audioausgabe 5.
Motherboard Manual FRANCE P4M900-M7 SE P4M890-M7 TE LGA 775 LGA 775 Processeurs Intel Core 2Duo/ P entium 4 / Processeurs Intel Core 2Duo/ P entium 4 / Pentium D / Celeron D / Celeron 4xx jusqu'à Pentium D / Celeron D / Celeron 4xx jusqu'à UC 3,8 GHz 3,8 GHz Prend en charge les technologies Prend en charge les technologies Hyper -Thre ading / d'ex écution de bit de Hyper -Thre ading / d'ex écution de bit de désactivation / I ntel Spe edStep® désactivation / I ntel Spe edStep® optimisée/ d'a
P4M900-M7 SE/P4M890-M7 TE P4M900-M7 SE LAN PHY Codec audio Fentes P4M890-M7 TE Realtek RTL 8201CL PH Y/ Realtek RTL 8201CL PH Y/ Atheros AR8012 PHY (en optio n) Atheros AR8012 PHY (en optio n) 10 / 100 Mb/s négociation a utomatique 10 / 100 Mb/s négociation a utomatique Half / Full duplex capability Half / Full duplex capability ALC662 ALC662 Prise en c harge de l'audio haute dé finition Prise en c harge de l'audio haute dé finition Sortie audio à 5.1 voies Sortie audio à 5.
Motherboard Manual IT ALIAN P4M900-M7 SE P4M890-M7 TE LGA 775 LGA 775 Processore Intel Core 2Duo/ Pentium 4 / Processore Intel Core 2Duo/ Pentium 4 / Pentium D / Celeron D / Celer on 4xx fi no a Pentium D / Celeron D / Celer on 4xx fi no a CPU 3.8 GHz 3.
P4M900-M7 SE/P4M890-M7 TE P4M900-M7 SE LAN PHY Codec audio Alloggi Connettori su scheda P4M890-M7 TE Realtek RTL 8201CL PH Y/ Realtek RTL 8201CL PH Y/ Atheros AR8012 PHY (optio nal) Atheros AR8012 PHY (optio nal) Negoziazione automatica 10 / 100 Mb/s Negoziazione automatica 10 / 100 Mb/s Capacità Half / Full Duplex Capacità Half / Full Duplex ALC662 ALC662 Supporto audio High-Definition (HD) Supporto audio High-Definition (HD) Uscita audio 5.1 canali Uscita audio 5.
Motherboard Manual SPANISH P4M900-M7 SE P4M890-M7 TE LGA 775 LGA 775 Procesador I ntel Core 2Duo / Penti um 4 / Procesador I ntel Core 2Duo / Penti um 4 / Pentium D / Celeron D / Celer on 4xx hasta Pentium D / Celeron D / Celer on 4xx hasta CPU 3,8 GHz 3,8 GHz Admite Hyper -Threadi ng / Bit de Admite Hyper -Threadi ng / Bit de deshabilitación de ejecució n / Intel deshabilitación de ejecució n / Intel SpeedStep® Me jora do / Intel SpeedStep® Me jora do / Intel Architecture-64 / Tecnologí a
P4M900-M7 SE/P4M890-M7 TE P4M900-M7 SE Red Local Códecs de sonido Ranuras P4M890-M7 TE Realtek RTL 8201CL PH Y/ Realtek RTL 8201CL PH Y/ Atheros AR8012 PHY (opcio nal) Atheros AR8012 PHY (opcio nal) Negociación de 10 / 100 Mb/s Negociación de 10 / 100 Mb/s Funciones Half / F ull dúplex Funciones Half / F ull dúplex ALC662 ALC662 Soporte de soni do de Alta Defi nición Soporte de soni do de Alta Defi nición Salida de sonido de 5.1 canales Salida de sonido de 5.
Motherboard Manual PORT UGUESE P4M900-M7 SE P4M890-M7 TE LGA 775 LGA 775 Processador Intel Core2Duo / Pe ntium 4 / Processador Intel Core2Duo / Pe ntium 4 / Pentium D / Celero n D / Celer on 4xx até 3,8 Pentium D / Celero n D / Celer on 4xx até 3,8 CPU GHz GHz Suporta as tecnologias Hyper -Threa ding / Suporta as tecnologias Hyper -Threa ding / Execute Disable Bit / Enha nced I ntel Execute Disable Bit / Enha nced I ntel SpeedStep® / Intel Arquitecture -64 / SpeedStep® / Intel Arquitecture -
P4M900-M7 SE/P4M890-M7 TE P4M900-M7 SE P4M890-M7 TE Realtek RTL 8201CL PH Y/ Realtek RTL 8201CL PH Y/ Atheros AR8012 PHY (opcio nal) Atheros AR8012 PHY (opcio nal) Auto ne gociação de 10 / 100 MB/s Auto ne gociação de 10 / 100 MB/s Capacidade semi/full- duplex Capacidade semi/full- duplex ALC662 ALC662 Codec de Suporta a especificação High-De finition Suporta a especificação High-De finition som Audio Audio LAN PHY Saída de á udio de 5.1 ca nais Ranhuras Saída de á udio de 5.
Motherboard Manual POLISH P4M900-M7 SE P4M890-M7 TE LGA 775 LGA 775 Procesor Intel Cor e2Duo/ Penti um 4 / Procesor Intel Cor e2Duo/ Penti um 4 / Pentium D / Celero n D / Celero n 4xx do 3,8 Pentium D / Celero n D / Celero n 4xx do 3,8 GHz Procesor GHz Obsługa Hyper-Threa ding / Exec ute Disable Obsługa Hyper-Threa ding / Exec ute Disable Bit / Enhance d I ntel Spee dStep® / Intel Bit / Enhance d I ntel Spee dStep® / Intel Architecture-64 / Exte nde d Memory 64 Architecture-64 / Exte nde d Memor
P4M900-M7 SE/P4M890-M7 TE P4M900-M7 SE LAN PHY Kodek dźwiękowy Gniazda Złącza P4M890-M7 TE Realtek RTL 8201CL PH Y/ Realtek RTL 8201CL PH Y/ Atheros AR8012 PHY (opcja) Atheros AR8012 PHY (opcja) 10 / 100 Mb/s z automatyczną negocjacją 10 / 100 Mb/s z automatyczną negocjacją szybkości szybkości Działanie w trybie połowicznego / pełnego Działanie w trybie połowicznego / pełnego dupleksu dupleksu ALC662 ALC662 Obsługa Hi gh- Definitio n Audio Obsługa Hi gh- Definitio n Audio 5.
Motherboard Manual RUSSIAN P4M900-M7 SE P4M890-M7 TE LGA 775 Процессор Intel Core 2Duo/ Pe ntium 4 / Pentium D / Celero n D / Celero n 4xx до 3.8 CPU ГГц (центра ль Подде ржка техноло гий Hy per-Thre ading / ный Execute Disable Bit / Enha nced I ntel процессор SpeedStep® / Intel Architecture-64 / ) Extende d Memor y 64 Technology *It is recommende d to use processors with 95W power co nsumption.
P4M900-M7 SE/P4M890-M7 TE P4M900-M7 SE Realtek RTL 8201CL PH Y/ Atheros AR8012 PHY (до полнитель но) Локаль на Автоматическое сог ласова ние 10 / 100 я сеть Мб/с Частич ная / полная дуплексна я способнос ть Звуково й кодек Слоты ALC662 Звукова я поддержка High-De finition 5.
Motherboard Manual ARABIC P4M900-M7 SE LGA 775 P4M890-M7 TE LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentiumﻡﻌﺎﻟﺠﺎت Intel Core2Duo/ Pe ntium 4 / Pentiumﻡﻌﺎﻟﺠﺎت ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ D / C eleron D / Celer on 4xx 3 . 8ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ D / C eleron D / Celer on 4xx 3 .
P4M900-M7 SE/P4M890-M7 TE P4M900-M7 SE ﺵﺒﻜﺔ داﺥﻠﻴﺔ آﻮدﻳﻚ اﻟﺼﻮ ت Realtek RTL 8201CL PH Y/ Realtek RTL 8201CL PH Y/ )اﺧﺘﻴﺎري ( Atheros AR8012 PHY )اﺧﺘﻴﺎري ( Atheros AR8012 PHY ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ 100 /10ﻡﻴﺠﺎ ﺑﺎﻳﺖ /ﺙﺎﻥﻴﺔ ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ 100 /10ﻡﻴﺠﺎ ﺑﺎﻳﺖ /ﺙﺎﻥﻴﺔ إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ/اﻟﻨﺼﻔﻲ إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ/اﻟﻨﺼﻔﻲ ALC662 ALC662 ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ 5.1ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮ ت 5.
Motherboard Manual JAPANESE P4M900-M7 SE P4M890-M7 TE LGA 775 LGA 775 Intel Core2Duo/ Pe ntium 4 / Pentium D / Intel Core2Duo/ Pe ntium 4 / Pentium D / Celeron D / Cel eron 4xx pr ocessor up to 3.8 Celeron D / Cel eron 4xx pr ocessor up to 3.
P4M900-M7 SE/P4M890-M7 TE P4M900-M7 SE LAN PHY サウンド Codec スロット オンボード コネクタ 背面パネル I/O ボードサイ ズ 特殊機能 OSサポー ト P4M890-M7 TE Realtek RTL 8201CL PH Y/ Realtek RTL 8201CL PH Y/ Atheros AR8012 PHY (オプション) Atheros AR8012 PHY (オプション) 10 / 100 Mb/秒のオートネゴシエーション 10 / 100 Mb/秒のオートネゴシエーション 半/全二重機能 半/全二重機能 ALC662 ALC662 ハイデフィニションオーディオのサポート ハイデフィニションオーディオのサポート 5.1 チャンネルオーディオアウト 5.
P4M900-M7 SE/P4M890-M7 TE BIOS Setup BIOS Setup ................................................................................................ 1 1 Main Menu ............................................................................................. 3 2 Standard CMOS Features..................................................................... 6 3 Advanced BIOS Features ...................................................................... 8 4 Advanced Chipset Features...................................
P4M900-M7 SE/P4M890-M7 TE BIOS Setup Introduction The purpose of this manual is to describe the settings in the Phoenix-Award™ BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to CMOS RAM. The power of CMOS RAM is supplied by a battery so that it retains the Setup information when the power is turned off. Basic Input-Output System (BIOS) determines what a computer can do without accessing programs from a disk.
P4M900-M7 SE/P4M890-M7 TE PCI Bus Support This PHOENIX-AWARD BIOS also supports Version 3.0 of the Intel PCI (Peripheral Component Interconnect) local bus specification. DRAM Support DDR2 SDRAM (Double Data Rate Synchronous DRAM) is supported. Supported CPUs This PHOENIX-AWARD BIOS supports the Intel CPU. Using Setup Use the arrow keys to highlight items in most of the place, press to select, use the and keys to change entries, press for help and press to quit.
P4M900-M7 SE/P4M890-M7 TE 1 Main Menu Once you enter Phoenix-Award BIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions. Use the arrow keys to select among the items and press to accept and enter the sub-menu. !! WARNING !! For better system performance, the BIOS firmware is being continuously updated. The BIOS information described in this manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your reference only.
P4M900-M7 SE/P4M890-M7 TE Advanced Chipset Features This submenu allows you to configure special chipset features. Integrated Peripherals This submenu allows you to configure certain IDE hard drive options and Programmed Input/ Output features. Power Management Setup This submenu allows you to configure the power management features. PnP/PCI Configurations This submenu allows you to configure certain “Plug and Play” and PCI options.
P4M900-M7 SE/P4M890-M7 TE Set User Password If the Supervisor Password is not set, then the User Password will function in the same way as the Supervisor Password. If the Supervisor Password is set and the User Password is set, the “User” will only be able to view configurations but will not be able to change them. Save & Exit Setup Save all configuration changes to CMOS (memory) and exit setup. Confirmation message will be displayed before proceeding.
P4M900-M7 SE/P4M890-M7 TE 2 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into several categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. Figure 2: Standard CMOS Setup Main Menu Selections This table shows the items and the available options on the Main Menu. Item Options Description Date mm : dd : yy Set the system date.
P4M900-M7 SE/P4M890-M7 TE Item Options Description IDE Channel 1 Master Options are in its sub menu. Press to enter the sub menu of detailed options. IDE Channel 1 Slave Options are in its sub menu. Press to enter the sub menu of detailed options. 360K, 5.25 in 1.2M, 5.25 in Drive A 720K, 3.5 in Drive B 1.44M, 3.5 in Select the type of floppy disk drive installed in your system. 2.88M, 3.
P4M900-M7 SE/P4M890-M7 TE 3 Advanced BIOS Features Figure 3: Advanced BIOS Setup Boot Seq & Floppy Setup This item allows you to setup boot sequence & Floppy.
P4M900-M7 SE/P4M890-M7 TE Hard Disk Boot Priority The BIOS will attempt to arrange the Hard Disk boot sequence automatically. You can change the Hard Disk booting sequence here. The Choices: Pri. Master, Pri. Slave, Sec. Master, Sec. Slave, USB HDD0, USB HDD1, USB HDD2, and Bootable Add-in Cards. First/Second/Third Boot Device The BIOS will attempt to load the operating system in this order. The Choices: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, LAN, Disabled.
P4M900-M7 SE/P4M890-M7 TE Boot Up Floppy Seek When enabled, System will test the floppy drives to determine if they have 40 or 80 tracks during boot up. Disabling this option reduces the time it takes to boot-up. The Choices: Enabled (default), Disabled. Shadow Setup This item allows you to setup cache & shadow setup. Figure 3.2: Shadow Setup Video BIOS Shadow Determines whether video BIOS will be copied to RAM for faster execution or not. Enabled (default) Optional ROM is enabled.
P4M900-M7 SE/P4M890-M7 TE Cache Setup CPU L1 & L2 Cache Depending on the CPU/chipset in use, you may be able to increase memory access time with this option. Enabled (default) Enable cache. Disabled Disable cache. CPU L3 Cache Depending on the CPU/chipset in use, you may be able to increase memory access time with this option. Enabled (default) Enable cache. Disabled Disable cache. CPU L2 Cache ECC Checking This item allows you to enable/disable CPU L2 Cache ECC Checking.
P4M900-M7 SE/P4M890-M7 TE CPU Feature Delay Prior to Thermal Set this item to enable the CPU Thermal function to engage after the specified time. The Choices: 4 Min, 8 Min, 16Min (default), 32 Min. Thermal Management This option allows you to select the way to control the “Thermal Management.” The Choices: Thermal Monitor 1 (default), Thermal Monitor 2.
P4M900-M7 SE/P4M890-M7 TE Limit CPUID MaxVal Set Limit CPUID MaxVal to 3, it should be “Disabled” for Windows XP. The Choices: Disabled (default), Enabled. C1E Function This item allows you to configure the Enhanced Halt State (C1E) function, which may reduce the power consumption of your system when the system is idle. The Choices: Auto (default),Disabled. Execute Disable Bit This item allows you to configure the Execute Disabled Bit function, which protects your system from buffer overflow attacks.
P4M900-M7 SE/P4M890-M7 TE Quick Power On Self Test Enabling this option will cause an abridged version of the Power On Self-Test (POST) to execute after you power up the computer. Disabled Normal POST. Enabled (default) Enable quick POST. Boot Up NumLock Status Selects the NumLock State after the system switched on. The Choices: On (default) Numpad is number keys. Off Numpad is arrow keys.
P4M900-M7 SE/P4M890-M7 TE OS Select For DRAM > 64MB A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB. The Choices: Non-OS2 (default), OS2. HDD S.M.A.R.T. Capability This item allows you to enable/disable HDD S.M.A.R.T. Capability. The Choices: Disabled (default), Enabled. Small Logo(EPA) Show This item allows you to select whether the “Small Logo” shows. Enabled (default) “Small Logo” shows when system boots up.
P4M900-M7 SE/P4M890-M7 TE 4 Advanced Chipset Features This submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory resources, such as DRAM. It also coordinates communications with the PCI bus. The default settings that came with your system have been optimized and therefore should not be changed unless you are suspicious that the settings have been changed incorrectly.
P4M900-M7 SE/P4M890-M7 TE AGP & P2P Bridge Control Highlight “Press Enter” next to the “AGP & P2P Bridge Control” label and pressing the enter key will take you a submenu with the following options: Figure 4.1: AGP & P2P Bridge Control AGP Aperture Size Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is a portion of the PCI memory address range dedicated for graphics memory address space.
P4M900-M7 SE/P4M890-M7 TE AGP Master 1 WS Read When enabled, read to the AGP (Accelerated Graphics Port) are executed with one wait states. The Choices: Enabled (default), Disabled. VGA Share Memory Size This item allows you to select the VGA share memory size.
P4M900-M7 SE/P4M890-M7 TE PCI Delay Transaction The chipset has an embedded 32-bit posted write buffer to support delay transactions cycles. Select Enabled to support compliance with PCI specification. The Choices: Enabled (default), Disabled. VLink mode selection This item allows you to select Vlink mode. The Choices: By Auto (default), Mode 0 , Mode 1, Mode 2, Mode 3, Mode 4. VLink 8X Support This item allows you to enable or disable VLink 8X support. The Choices: Enabled (default), Disabled.
P4M900-M7 SE/P4M890-M7 TE 5 Integrated Peripherals Figure 5.
P4M900-M7 SE/P4M890-M7 TE SATA Controller This option allows you to enable the on-chip Serial ATA. The Choices: Enabled (default), Disabled. SATA Controller Mode This option allows you to select SATA Mode. The Choices: RAID, IDE (default). IDE DMA Transfer Access This item allows you to enable or disable the IDE DMA transfer access. The Choices: Enabled (default), Disabled. On-chip IDE Channel 0/1 The motherboard chipset contains a PCI IDE interface with support for two IDE channels.
P4M900-M7 SE/P4M890-M7 TE IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sectors read / write. If your IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read / write per sector where the drive can support. The Choices: Enabled (default), Disabled.
P4M900-M7 SE/P4M890-M7 TE Super IO Device Press Enter to configure the Super I/O Device. Onboard FDC Controller Select enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you installed another FDC or the system uses no floppy drive, select disabled in this field. The Choices: Enabled (default), Disabled. Onboard Serial Port 1 Select an address and corresponding interrupt for the first and second serial ports.
P4M900-M7 SE/P4M890-M7 TE Parallel Port Mode This item allows you to determine how the parallel port should function. The default value is SPP. The Choices: SPP (default) Using Parallel port as Standard Printer Port. EPP Using Parallel Port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP & EPP mode. ECP Mode Use DMA Select a DMA Channel for the port. The Choices: 3 (default), 1.
P4M900-M7 SE/P4M890-M7 TE USB Operation Mode This option let you select the operation mode of USB function. The Choices: High Speed (default), Full/Low Speed. USB Keyboard/Mouse/Storage Function These options allow you to enable or disable the USB keyboard/mouse/storage devices. The Choices: Enabled (default), Disabled. USB Mass Storage Device Boot Setting These options allow you to choose the boot up type of the USB mass storage devices.. The Choices: Auto mode (default), FDD mode, HDD mode.
P4M900-M7 SE/P4M890-M7 TE 6 Power Management Setup The Power Management Setup Menu allows you to configure your system to utilize energy conservation and power up/power down features. Figure 6. Power Management Setup ACPI Function This item displays the status of the Advanced Configuration and Power Management (ACPI). The Choices: Enabled (default), Disabled.
P4M900-M7 SE/P4M890-M7 TE Power Management Option This category allows you to select the power saving method and is directly related to the following modes: 1. HDD Power Down. 2. Suspend Mode. There are three options of Power Management, three of which have fixed mode settings Min. Saving Minimum power management. Suspend Mode = 1 hr. HDD Power Down = 15 min Max. Saving Maximum power management only available for sl CPU’s. Suspend Mode = 1 min. HDD Power Down = 1 min.
P4M900-M7 SE/P4M890-M7 TE V/H SYNC+Blank (default) This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer. Blank Screen This option only writes blanks to the video buffer. DPMS Support Initial display power management signaling. Modem Use IRQ This determines the IRQ, which can be applied in MODEM use. The Choices: 3 (default), 4, 5, 7, 9, 10, 11, NA.
P4M900-M7 SE/P4M890-M7 TE WDRT Count This option allows you to control the count of the Watchdog Timer. The Choices: 1023 (default); min=0, max=1023, key in a DEC number. Wakeup Event Detect Figure 6.1:IRQ/Event Activity Detect PS2KB Wakeup Select When select Password, please press Enter key to change password with a maximum length of 8 characters. The Choices: Hot Key (default), Password. PowerOn by PCI Card When you select Enabled, a PME signal from PCI card returns the system to Full ON state.
P4M900-M7 SE/P4M890-M7 TE RTC Alarm Resume When “Enabled”, you can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode. The Choices: Disabled (default), Enabled. Date (of Month) You can choose which month the system will boot up. This field is only configurable when “RTC Resume” is set to “Enabled”. Resume Time (hh:mm:ss) You can choose the hour, minute and second the system will boot up.
P4M900-M7 SE/P4M890-M7 TE 7 PnP/PCI Configurations This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.
P4M900-M7 SE/P4M890-M7 TE Reset Configuration Data The system BIOS supports the PnP feature which requires the system to record which resources are assigned and protects resources from conflict. Every peripheral device has a node, which is called ESCD. This node records which resources are assigned to it. The system needs to record and update ESCD to the memory locations. These locations are reserved in the system BIOS.
P4M900-M7 SE/P4M890-M7 TE PCI / VGA Palette Snoop Some old graphic controllers need to “snoop” on the VGA palette and then map it to their display as a way to provide boot information and VGA compatibility. This item allows such snooping to take place. The Choices: Disabled (default), Enabled Assign IRQ For VGA This item allows the users to choose which IRQ to assign for the VGA. The Choices: Enabled (default), Disabled.
P4M900-M7 SE/P4M890-M7 TE 8 PC Health Status Figure 8: PC Health Status Shutdown Temperature This item allows you to set up the CPU shutdown Temperature. This item is only effective under Windows 98 ACPI mode. The Choices: 65℃/ 149℉, 70℃/ 158℉, 75℃/ 167℉, 80℃/ 176℉, 85℃/ 185 ℉(default), 90℃/ 167℉, 95℃/ 194℉, Disabled. CPU FAN Control by This item allows you to choose the way to control the CPU FAN. The Choices: Manual, Always On (default), Smart Lv1, Smart Lv2, Smart Lv3.
P4M900-M7 SE/P4M890-M7 TE Start Value (Max:128) When CPU temperature arrives to the set value, the CPU fan will work under Smart Fan Function mode. The range is from 0~128, with an interval of 1. The Choices: Min=0, Max=128; key in a DEC number. Slope Level (Value/℃) Increasing the value of slope PWM will raise the speed of CPU fan. The Choices: Min=0, Max=15; key in a DEC number. ▲-Temperature This item allows you to set the deviation of the temperature.
P4M900-M7 SE/P4M890-M7 TE 9 Performance Booster Zone Figure 9: Performance Booster Zone DRAM Clock/Drive Control This item controls the DRAM Clock. Highlight “Press Enter” next to the “DRAM Clock/Drive Control” label and pressing the enter key will take you a submenu with the following options: Figure 9.
P4M900-M7 SE/P4M890-M7 TE DRAM Clock This item determines DRAM clock. The Choices: By SPD (default), 100MHz, 133MHz, 166MHz, 200MHz, 266MHz, 333MHz . DRAM Timing This item determines DRAM clock/ timing. The Choices: Auto by SPD (default), Manual, Turbo, Ultra. SDRAM CAS Latency When DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. The Choices: 2.5 /4(default). Bank Interleave This item allows you to enable or disable the bank interleave feature.
P4M900-M7 SE/P4M890-M7 TE ACT (0) to ACT (1) (tRRD) This item allows you to determine the selection for ACT (0) to ACT (1) (tRRD) The Choices: 3T (default). 1T CMD Support The Choices: Disable (default), Auto. DDR2 On Die Termination This option allows you to choose the working type of ODT. The Choices: ODT Always ON (default), Dynamic ODT, ODT Always OFF. CPU CLOCK This item allows you to select CPU Clock, and CPU over clocking.
P4M900-M7 SE/P4M890-M7 TE Spread Spectrum This item allows you to enable/disable the Spread Spectrum function. The Choices:+/- 0.25% (default), +/- 0. 5%, Disabled, -0.5%, -1.0%. DDR Voltage This item allows you to select DDR Voltage. The Choices: StartUp (default), +0.10V, +0.20V, +0.30V, +0.40V, +0.50V, +0.60V, +0.70V. CPU Voltage This item allows you to select CPU Voltage. The Choices: StartUp (default), +0.012V~+0.787V.