Owner's Manual

P4M80-M4 BIOS SETUP
41
Spread S pec trum
This item allows you to enable/disable the Spread Spectrum function.
The Choices: Enabled (default), Disabled.
CPU CLOCK
This item allows you to select CPU Clock, and CPU over clocking.
The Choices: 100MHz (default).
Special Notice:
If unfortunately, the system’s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON
status. All the CMOS data will be loaded as defaults settin g.
Method 2:
Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor.