Owner's Manual

P4M80-M4 BIOS SETUP
33
VGA
When set to On, any event occurring at a VGA Port will awaken a system
which has been powered down.
The Choices: Off (default), On.
LPT & COM
When this option is set to On, any event occurring at a COM (serial)/LPT (printer) port
will awaken a system which has been powered down.
The Cho ices: LPT/COM (default), COM, LPT, NONE.
HDD & FDD
When this option is set to On, any event occurring on a hard drive or a floppy
drive will awaken a system which has been powered down.
The Ch o i ce s : On (default), Off.
PCI Master
When set to On, you need a LAN add-on card which supports the power function. It
should also support the wake-up on LAN jump.
The Ch o i ce s : Of f (default), On.
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the system to Full ON
state.
The Choices: Disabled (default), Enabled.
Modem Ring Resume
This item allows you to disable or enable Modem Ring Resume function.
The Choices: Disabled (default), Enabled.
RTC Alarm Resume
When “Enabled”, you can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode.
The Ch o i ce s : Disabled (default), Enabled.
Date (of Month)
You can choose which month the system will boot up. This field is only configurable
when “RTC Resume” is set to “Enabled”.
Resume Time (hh:mm:ss)
You can choose the hour, minute and second the system will boot up. This field is only
configurable when “RTC Resume” is set to “Enabled”.