Owner's Manual

P4M80-M4 BIOS SETUP
18
Active to Precharge (Tras)
This item allows you to specify the minimum bank active time.
The Choices: 07T (default), 06T, 05T.
Active to CMD (Trcd)
Use this item to specify the delay from the activation of a bank to the time that a
read or write command is accepted.
The Choices: 4T (default), 2T, 3T .
REF to ACT/REF (Trfc)
T his item allows you to determine the selection for REF to ACT /REF (Trfc).
The Choices: 25T (default).
ACT to ACT(1) (TRRD)
T his item allows you to determine the selection for ACT to ACT (1) (T RRD)
The Choices: 3T (default).
Read to Precharge (Trtp)
T his item allows you to determine the selection for Read to P recharge (Trtp)
The Choices: 2T (default).
Write to Read CMD (Twtr)
T his item allows you to determine the selection for Write to Read CMD (T wtr)
The Choices: 1T (default).
Write Recovery Time (Twr)
T his item allows you to determine the selection for Write Recovery T ime (T wr)
The Choices: 4T (default).
DRAM Command Rate
This item controls clock cycle that must occur between the last valid write operation
and the next command.
The Choices: 2T Command (default), 1T Command.
RDSAIT mode
T his item allows you to determine the selection for RDSAIT mode.
The Choices: Auto (default).
RASAIT selection
T his item allows you to determine the selection for RAS AIT .
The Choices: 03 (default).