Owner's Manual

P4M80-M4 BIOS SETUP
10
CPU Feature
 Figure 3.1: Advanced CPU Feature
Delay Prior to Thermal
Set this item to enable the CP U Thermal function to enga ge after the specified t ime.
The Choices: 4 Min, 8 Min, 16Min (default), 32 Min.
Thermal Management
This option allows you to select the way to control the “Thermal Management.”
The Choices: Thermal Monitor 1 (default), Thermal Monitor 2.
TM2 Bus Ratio
This option represents the frequency (bus ratio of the throttled performance state that
will be initiated when the on-diesensor goes from not hot to hot.)
Min= 0
Max= 255
Key in a DEC number=
The Choices: 0 X (default).
TM2 Bus VID
This option represents the voltage of the throttled performance state that will be
initiated when the on-diesensor goes from not hot to hot.
The Choices: 0.8375V (default), 0.8375-1.6000.